The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-22-2007, 04:25 AM   #1
panhandler62
Java Mechanic
 
panhandler62's Avatar
 
Join Date: Jun 2005
Location: Martinsburg, WV
Posts: 6,763
Mix & Match Front End

OK.. so I have a 68 C-20. I am going to be removing the spindles and everything attached to them and replacing them with the spindles from an 83 3/4 ton.

At some point in this process I will be replacing all the bushings and the ball joints. Herein lies my problem --

If I stroll into an Advanced Auto and tell the dude behind the counter that I need ball joints for a 68 C-20 with a 350 and 83 spindles he's either going to argue with me, sell me some pine freshner or have an aneurism.

Obviously; in order to protect his health and my sanity I will have to fudge some data. Soooo.....

What ball joints do I need for this setup? My best guess is to get the 83 parts and tweak the a-arms as needed but I would apreciate input from someone who has been there.
__________________
Keith
11 Lincoln MKT -- Momma's wagon
13 G37xS -- middle age crazy car
68 C20 Fleetside -- RIP
Decorating the whole town up at a cost of $27 ....
panhandler62 is offline   Reply With Quote
Old 12-22-2007, 04:48 AM   #2
nightmare
Senior Member
 
nightmare's Avatar
 
Join Date: May 2002
Location: Hammond, WI
Posts: 1,817
Re: Mix & Match Front End

i think that with the 2wd's, the a-arms and ball joints are completely different for those years. what you may want to do is pull the a-arms from the '83, and bolt them onto the front of the '68. then all you have to do is tell them that you need the ball joints from the '83
__________________
Mike

2001 Dakota R/T - Silver CC - 1 of 1671 •360 w/46RE •392 limited slip
1972 Chevy Suburban - Turquoise/Black
1969 Chevy C/10 - Blue LWB •350 w/ 700R4 •3.73 posi •PS PB A/C - SOLD

Using your turn signal is not "giving information to the enemy"

67-72 FAQ

Quote:
Originally Posted by GMCMAX View Post
My lugnuts require more torque than your honda makes!

Last edited by nightmare; 12-22-2007 at 04:48 AM.
nightmare is offline   Reply With Quote
Old 12-22-2007, 05:05 AM   #3
67ChevyRedneck
Hittin E-Z Street on Mud Tires
 
67ChevyRedneck's Avatar
 
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
Re: Mix & Match Front End

Quote:
Originally Posted by nightmare View Post
i think that with the 2wd's, the a-arms and ball joints are completely different for those years. what you may want to do is pull the a-arms from the '83, and bolt them onto the front of the '68. then all you have to do is tell them that you need the ball joints from the '83
????


I know 71-72 used different ball joints than 67-69, but the 71-72 ball joints will fit in the 67-69 a arms (I've done this, I know it works ) I think the uppers were the same, but the lower ones were longer or fatter, or something like that.

I'm venturing a guess that you'll have to have 83 ball joints. Bring the a-arms with you to see if the ball joints will press (lower) and bolt (upper) into the 68 A-arms. Isn't your truck also a 3/4 ton? That may complicate it more

Best of luck to you. Let us know what works.
__________________
Jesse James
1967 C10 SWB Stepside: 350/700R4/3.73
1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc
1968 Pontiac Firebird: Project Fire Chicken!
2015 Silverado Double Cab 5.3L Z71
2001 Jeep Wrangler Sport 4.0L 5spd
2020 Chevrolet Equinox Premium 2.0L Turbo
2011 Mustang V6 ~ Wife's ride
American Born, Country by the Grace of God
1967 CST Shop Truck Rebuild!
My 1967 C-10 Build Thread
My Vintage Air A/C Install
Project "On a Dime"
Trying my hand at Home Renovation!
1965 Mustang Modifications!
67ChevyRedneck is offline   Reply With Quote
Old 12-22-2007, 05:15 AM   #4
dave2953
Dave's not here, man
 
dave2953's Avatar
 
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
Re: Mix & Match Front End

I think the '83 arms will bolt up to the crossmember in your truck. I used arms from an '89 burb on my 68 c-10. I know the arms are different between the 1/2 and 3/4, but I believe they bolt up to the crossmember the same.
__________________
- 2014 VW Jetta
- 2015 VW Jetta
- 1966 Ford F-250
dave2953 is offline   Reply With Quote
Old 12-22-2007, 09:26 AM   #5
rlm316
Registered User
 
rlm316's Avatar
 
Join Date: Aug 2006
Location: Woodstown, NJ
Posts: 669
Re: Mix & Match Front End

Upper and lower control arms are the same exept for the steering stop on the lower. The shaft part numbers are the same for both generations. When you buy your parts, buy for the donor truck, ie '83. Just did the same thing on a '70. I changed the complete crossmember though. If you are doing this for the addition of disc brakes the brake lines are routed differently for a drum than for a disc set-up. Make sure that the lines don't pinch or pull as you turn the wheel, that will cause major fatigue on the lines. PM me if you want more info. Lane
rlm316 is offline   Reply With Quote
Old 12-23-2007, 09:29 AM   #6
panhandler62
Java Mechanic
 
panhandler62's Avatar
 
Join Date: Jun 2005
Location: Martinsburg, WV
Posts: 6,763
Re: Mix & Match Front End

I renegotiated the deal and am getting the control arms now also.
__________________
Keith
11 Lincoln MKT -- Momma's wagon
13 G37xS -- middle age crazy car
68 C20 Fleetside -- RIP
Decorating the whole town up at a cost of $27 ....
panhandler62 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com