![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2000
Location: branson, missouri
Posts: 166
|
steering prob
OK. WHEN I TURN ALL THE WAY TO THE RIGHT MY DRIVERS SIDE TIRE RUBS MY PITMAN ARM WHERE IT MEETS THE FRONT DRAG LINK. MY TRUCK HAS A 4 INCH LIFT AND 33 X 12.50 BFG'S ON IT. IS THERE ANY WAY I CAN ADJUST THIS OUT. WOULD A DROP PITMAN HELP?IF SO, HOW?
![]()
__________________
72 CHEYENNE 3/4 TON 4X4...14 bolt full float rear.4.10 gear and 350/350/np205 has a little needs a lot! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2000
Location: branson, missouri
Posts: 166
|
OH YEAH THIS ISN'T MY 3/4 TON. IT IS A 1/2 TON SHORTY
__________________
72 CHEYENNE 3/4 TON 4X4...14 bolt full float rear.4.10 gear and 350/350/np205 has a little needs a lot! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2000
Location: branson, missouri
Posts: 166
|
anyone?
![]()
__________________
72 CHEYENNE 3/4 TON 4X4...14 bolt full float rear.4.10 gear and 350/350/np205 has a little needs a lot! |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2000
Location: branson, missouri
Posts: 166
|
I cant believe no one has had this problem
__________________
72 CHEYENNE 3/4 TON 4X4...14 bolt full float rear.4.10 gear and 350/350/np205 has a little needs a lot! |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2001
Location: Arizona
Posts: 147
|
What year is it?
__________________
1969 Blazer: 350/350, 4X4, HEI, Edlebrock carb/intake, dual flowmasters, np205, 3:07's and the rest is mostly stock. The front end disc swap is finally complete ![]() 2002 Z71 Tahoe. CAI, Flowmaster 40, Silverstars in high, low and fogs and a bunch of mods (upgrades) inside and out. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,717
|
Get rid of the 7" or 8" wheels you have and get some 10's. Or if you have 8's with 4" or more backspacing, go to an 8" wheel with 3.5" bs. You can get away with 4" on the 10's. Wheel fitment is a science, or occasionally blind luck... My 33 14.5 rubbed on mine when I had 8" wheels with 3.5" bs, but the 35 14.5 did not with the 10" 3.5" bs wheels I have now. I got rid of the crappy bias tires and run 35 12.5 BFG MT's now. The drop arm will not solve your problem.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2000
Location: branson, missouri
Posts: 166
|
thats probably it. I have the stock rally style with 33/12.5 mud terrains. Are there any cheap stock style that would help.......backspacing wise?
__________________
72 CHEYENNE 3/4 TON 4X4...14 bolt full float rear.4.10 gear and 350/350/np205 has a little needs a lot! |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2000
Location: branson, missouri
Posts: 166
|
oh and it is a 1970
__________________
72 CHEYENNE 3/4 TON 4X4...14 bolt full float rear.4.10 gear and 350/350/np205 has a little needs a lot! |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2001
Location: Arizona
Posts: 147
|
Hey Tracy,
You say that you have the stock rims on still? What size are they? If they are 8's then the tire has to look pretty funny mounted to them. 12.5's are going to buldge out alot on those skinny rims. Sounds as though the rubbing may only be the smaller of the problem......
__________________
1969 Blazer: 350/350, 4X4, HEI, Edlebrock carb/intake, dual flowmasters, np205, 3:07's and the rest is mostly stock. The front end disc swap is finally complete ![]() 2002 Z71 Tahoe. CAI, Flowmaster 40, Silverstars in high, low and fogs and a bunch of mods (upgrades) inside and out. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|