Acc Carpet Kits - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low68 · 01-15-2003, 12:07 AM

Ok, I know that there are some people on here who have acc carpet kits. Can any one take a picture of it? I want to see how far up the footboard it goes and how far back behind the seat does it go? what do the edges look like? would you recomend their carpet to me? Thanks for the help!
Low68

Slammed67 · 01-15-2003, 12:24 AM

Here are some pics of mine that should give you a good idea. So far I'm happy with it, although it hasn't seen much use yet, so I can't say how well it will wear. The rear edge would probably but up against the gas tank (if you had one). I plan on buying some yardage of the carpet and covering the rest of the firewall.

useRc10 · 01-15-2003, 12:28 AM

mine has faded some but otherwise is holding up rather well
-Nick

sakohntr · 01-15-2003, 12:58 AM

I bought there full lenght rubber floor cause i did'nt like how gm's did'nt go all the way back. And it is a piss poor fit. I suspect they sent me the wrong floor hump style....

Low68 · 01-18-2003, 10:21 PM

Thanks for all the replies. I really want something that goes all the way to the back of the cab. Thanks
low68

Brewski* · 01-19-2003, 12:03 AM

I did mine last year with carpet on the gas tank for the buckets, kickpanels, and door bottoms. Looks great~! I get lotsa compliments.

GMC JUNKIE TOO · 01-19-2003, 01:16 AM

I have an acc kit and it is holding up good. I want to get the exact same carpet for the back of my panel Is it avalible?

REPO1 · 01-19-2003, 11:58 AM

Mine fit great! It went up to the heater box, as well as all the way back to the tank under the seat.

Now the ACC for my '71 Camaro was a different story! It fit like crap, and had to be trimmed to fit. I hate it still.

01-15-2003, 12:07 AM	#1
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Acc Carpet Kits Ok, I know that there are some people on here who have acc carpet kits. Can any one take a picture of it? I want to see how far up the footboard it goes and how far back behind the seat does it go? what do the edges look like? would you recomend their carpet to me? Thanks for the help! Low68 __________________ Build Thread

01-15-2003, 12:24 AM	#2
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Here are some pics of mine that should give you a good idea. So far I'm happy with it, although it hasn't seen much use yet, so I can't say how well it will wear. The rear edge would probably but up against the gas tank (if you had one). I plan on buying some yardage of the carpet and covering the rest of the firewall. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

01-15-2003, 12:28 AM	#3
useRc10 Registered User Join Date: Feb 2001 Location: Mechanicsville, VA, 23111 Posts: 1,138	mine has faded some but otherwise is holding up rather well -Nick __________________ -'02 Chevy Avalanche, 5.3L, 4x4... needing a small lift and bigger tires -'72 Chevy C-10(350, bored 60 over)dual flowmasters, 3 on the tree -'85 K5 Blazer,305 NO MORE...350 is in,2" lift,33" Mickey Thompson Baja Claw Radials -dads '70 burb (red, 5-7 drop, 350...) www.geocities.com/userc10/truckhome.html AIM: Auntjoedadda

01-15-2003, 12:58 AM	#4
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	kits I bought there full lenght rubber floor cause i did'nt like how gm's did'nt go all the way back. And it is a piss poor fit. I suspect they sent me the wrong floor hump style.... __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

01-18-2003, 10:21 PM	#5
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Thanks for all the replies. I really want something that goes all the way to the back of the cab. Thanks low68 __________________ Build Thread

01-19-2003, 12:03 AM	#6
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	I did mine last year with carpet on the gas tank for the buckets, kickpanels, and door bottoms. Looks great~! I get lotsa compliments. Attached Images

01-19-2003, 01:16 AM	#7
GMC JUNKIE TOO THE QUICKER FIXERUPER Join Date: Jul 2002 Location: Ok Posts: 615	I have an acc kit and it is holding up good. I want to get the exact same carpet for the back of my panel Is it avalible?

01-19-2003, 11:58 AM	#8
REPO1 Shortbox wanna-be. Join Date: Mar 2002 Location: Fort St.John, British Columbia, Canada Posts: 773	Mine fit great! It went up to the heater box, as well as all the way back to the tank under the seat. Now the ACC for my '71 Camaro was a different story! It fit like crap, and had to be trimmed to fit. I hate it still. __________________ 1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.