WIW..Factory tach dash w/vaccumm gauge - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BlazerWA · 01-29-2008, 11:18 AM

Hey im thinking of selling an extra set of gauges I have, just curious as to what something like this is worth, I dont think I have seen factory vaccumm b4, is it rare? anyways, I also have a set of blazer bumpers, need , what should I post them for? thanks for all your help!!

paint[IMG]

[/IMG]

72BlazerWA · 01-29-2008, 11:19 AM

the gauges work and I also have a tach wiring harness, thanks!

68GMCCustom · 01-29-2008, 11:23 AM

its only worth about $25.....and yes, I'll take it!

72BlazerWA · 01-29-2008, 11:25 AM

well I saw a set with just tach go for well over 200 on ebay, maybe the vaccumm made it more valuable? and also the fact its in great shape..?

**too much stuff** · 01-29-2008, 11:30 AM

I would guess around $250-$300 depending on the printed circuit and general condition.

68GMCCustom · 01-29-2008, 12:02 PM

Quote:

Originally Posted by 72BlazerWA

well I saw a set with just tach go for well over 200 on ebay, maybe the vaccumm made it more valuable? and also the fact its in great shape..?

I was just playing around.

72Levi · 01-29-2008, 12:04 PM

There was one on eBay that sold recently for something like $550+/- Someone started a thread on it, WOW it was crazy but he got the money for it. So put it on eBay and I bet you get $500+ for it

**too much stuff** · 01-29-2008, 02:16 PM

The one on e-bay also had a speedwarning if we are talking about the same one. That will drive the price up quite a bit.. I will still say $250-$300 depending on condition. Also, the vacuum wasn't available in the smaller pickups,(c-10, c-20, c-30) but it is still a cool option that will work in a pickup. Eric

72armyswbtruck · 01-29-2008, 05:36 PM

You can get the tach/vac conversion kit for around $250 to $300. I have sold several tach/vac ones before for arond $275.

Big J · 01-29-2008, 11:02 PM

Didn't you post before that it has low mileage on it. It couldn't hurt to put that in your listing. If it has little useage on it I'd think it'd make it worth more. Is it all original or is the bezel new?

MiniD · 01-30-2008, 12:41 AM

I've seen them advertised on PDX craigslist for about $400 pretty regularly. If there's any cracks, it goes down significantly (~$90 to replace the face, ~$40 to replace the lense).

72BlazerWA · 01-30-2008, 05:27 AM

yeah I posted it b4 but not for sale or WIW..I posted it when I became a member..I also just posted it on the blazer section but it got moved by a mod here to WIW. anyways, maybe ill give ebay a shot..thanks!

bouncytruck · 01-30-2008, 09:03 AM

Quote:

Originally Posted by MiniD

I've seen them advertised on PDX craigslist for about $400 pretty regularly. If there's any cracks, it goes down significantly (~$90 to replace the face, ~$40 to replace the lense).

That's a board member who sells them. He also sells on the Seattle Craigslist.

As for the guages, I'd guess more in the $275 range as long as it is for a V8 and stamped for a V8. You can buy new repops for around $500-600 range (I haven't checked in awhile).

I bought a used one about 6 years ago for $60. I never installed it though. It went with my 69 when I traded it. I wish I had kept it.

MiniD · 01-30-2008, 09:44 AM

I've bought a couple of things from the person you're talking about (Mel - AKA "Classic Bowties"), but there's another one listed this week from Vancouver ($400) and there were two others last week. I've seen quite a few. Mel's are usually rebuilt with the tac "upgrade", but they are also completely refurbished to look like new. I did the upgrade on mine for $199 but haven't gotten around to painting the needles and have a definate left to right color variation due to sun exposure.

72BlazerWA · 01-30-2008, 09:46 AM

yeah theres a re-man one on ebay going for 425 with almost 3 days left...its obviously nicer than mine, but mine is original GM..but I cant imagine it would go for over 400 bucks..maybe I should hold on to it if its so valuable..?

bouncytruck · 01-30-2008, 10:07 AM

Put it in your truck!

72BlazerWA · 02-03-2008, 07:32 AM

how do u know if it stamped for a v-8? where would I look for that? thanks!

bouncytruck · 02-10-2008, 12:50 AM

It should be on the back of the tach itself. You'll need to have the cluster out of the truck to see.

01-29-2008, 11:18 AM	#1
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	WIW..Factory tach dash w/vaccumm gauge Hey im thinking of selling an extra set of gauges I have, just curious as to what something like this is worth, I dont think I have seen factory vaccumm b4, is it rare? anyways, I also have a set of blazer bumpers, need , what should I post them for? thanks for all your help!!paint[IMG][/IMG]

01-29-2008, 11:19 AM	#2
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Re: WIW..Factory tach dash w/vaccumm gauge the gauges work and I also have a tach wiring harness, thanks!

01-29-2008, 11:23 AM	#3
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: WIW..Factory tach dash w/vaccumm gauge its only worth about $25.....and yes, I'll take it! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

01-29-2008, 11:25 AM	#4
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Re: WIW..Factory tach dash w/vaccumm gauge well I saw a set with just tach go for well over 200 on ebay, maybe the vaccumm made it more valuable? and also the fact its in great shape..?

01-29-2008, 11:30 AM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: WIW..Factory tach dash w/vaccumm gauge I would guess around $250-$300 depending on the printed circuit and general condition. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-29-2008, 12:04 PM	#7
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: WIW..Factory tach dash w/vaccumm gauge There was one on eBay that sold recently for something like $550+/- Someone started a thread on it, WOW it was crazy but he got the money for it. So put it on eBay and I bet you get $500+ for it __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

01-29-2008, 02:16 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: WIW..Factory tach dash w/vaccumm gauge The one on e-bay also had a speedwarning if we are talking about the same one. That will drive the price up quite a bit.. I will still say $250-$300 depending on condition. Also, the vacuum wasn't available in the smaller pickups,(c-10, c-20, c-30) but it is still a cool option that will work in a pickup. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-29-2008, 05:36 PM	#9
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: WIW..Factory tach dash w/vaccumm gauge You can get the tach/vac conversion kit for around $250 to $300. I have sold several tach/vac ones before for arond $275. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

01-29-2008, 11:02 PM	#10
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: WIW..Factory tach dash w/vaccumm gauge Didn't you post before that it has low mileage on it. It couldn't hurt to put that in your listing. If it has little useage on it I'd think it'd make it worth more. Is it all original or is the bezel new? __________________ BAZINGA! My Build

01-30-2008, 12:41 AM	#11
MiniD Registered User Join Date: Mar 2007 Location: Portland, OR Posts: 108	Re: WIW..Factory tach dash w/vaccumm gauge I've seen them advertised on PDX craigslist for about $400 pretty regularly. If there's any cracks, it goes down significantly (~$90 to replace the face, ~$40 to replace the lense).

01-30-2008, 05:27 AM	#12
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Re: WIW..Factory tach dash w/vaccumm gauge yeah I posted it b4 but not for sale or WIW..I posted it when I became a member..I also just posted it on the blazer section but it got moved by a mod here to WIW. anyways, maybe ill give ebay a shot..thanks!

01-30-2008, 09:44 AM	#14
MiniD Registered User Join Date: Mar 2007 Location: Portland, OR Posts: 108	Re: WIW..Factory tach dash w/vaccumm gauge I've bought a couple of things from the person you're talking about (Mel - AKA "Classic Bowties"), but there's another one listed this week from Vancouver ($400) and there were two others last week. I've seen quite a few. Mel's are usually rebuilt with the tac "upgrade", but they are also completely refurbished to look like new. I did the upgrade on mine for $199 but haven't gotten around to painting the needles and have a definate left to right color variation due to sun exposure.

01-30-2008, 09:46 AM	#15
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Re: WIW..Factory tach dash w/vaccumm gauge yeah theres a re-man one on ebay going for 425 with almost 3 days left...its obviously nicer than mine, but mine is original GM..but I cant imagine it would go for over 400 bucks..maybe I should hold on to it if its so valuable..?

01-30-2008, 10:07 AM	#16
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: WIW..Factory tach dash w/vaccumm gauge Put it in your truck! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

02-03-2008, 07:32 AM	#17
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Re: WIW..Factory tach dash w/vaccumm gauge how do u know if it stamped for a v-8? where would I look for that? thanks!



Register or Log In To remove these advertisements.

02-10-2008, 12:50 AM	#18
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: WIW..Factory tach dash w/vaccumm gauge It should be on the back of the tach itself. You'll need to have the cluster out of the truck to see. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.