Anyone know what brand of A arm this is? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nhtc33d · 02-11-2008, 11:41 AM

Hi All, I found these parts for sale and was thinking about buying them. Everything has never been used but was installed and left sitting outside for 6 months. There is a set of air bags,lower control arms,disc brake kit,new ball joints and tie rod ends, and 2.5" drop spindles. The bags are slam 7's and the arms are air ride tech.(this what I was told) Don't know what brand the spindles or disc brake kit are. What do you all think this stuff is worth?
Thanks for any help/advise you can give. Mark

ryan913 · 02-11-2008, 12:49 PM

Do you also get the sub frame? If not you will need to grind off the upper airbag mounting plate. To give you an idea, the parts cost well over $500.00 new.

PBFAB.COM · 02-11-2008, 01:33 PM

Lower arms retail for $499.

Bags are $75 a piece.

That's $650 new for those two items alone.

nhtc33d · 02-11-2008, 09:12 PM

I could have subframe but I don't think I will take it. The seller said he will remove the parts and meet me to pick them up. That will save me 5 hours of driving.(I have never seen the parts in person just pictures) Do you think the A arms are from Air Ride Tech?(Are tubular A arms all about the same?) Thanks much!!!

PBFAB.COM · 02-12-2008, 12:39 AM

Not all tube arms are the same... those are ART arms for sure.

nhtc33d · 02-12-2008, 01:35 AM

Quote:

Originally Posted by porterbuilt

Not all tube arms are the same... those are ART arms for sure.

So I can be safe to say thats a good thing?

PBFAB.COM · 02-12-2008, 01:38 AM

The ART arms as as good as it gets for quality. A few guys think they are "overpriced", but I haven't ever heard complaints on quality.

How mych does the guy want... and what exactly are you getting?

ryan913 · 02-12-2008, 06:14 AM

I still think you should grab the subframe to have the complete system.

nhtc33d · 02-12-2008, 06:56 AM

Quote:

Originally Posted by porterbuilt

The ART arms as as good as it gets for quality. A few guys think they are "overpriced", but I haven't ever heard complaints on quality.

How mych does the guy want... and what exactly are you getting?

I am getting the lower arms, ball joints ,tie rod ends, bags, drop spindles, and the disc brake kit. He was asking $500.00

nhtc33d · 02-12-2008, 06:57 AM

Quote:

Originally Posted by ryan913

I still think you should grab the subframe to have the complete system.

I agree that would be nice. I hope it works out that I have the time to do that.

02-11-2008, 11:41 AM	#1
nhtc33d Registered User Join Date: Dec 2007 Location: PA Posts: 326	Anyone know what brand of A arm this is? Hi All, I found these parts for sale and was thinking about buying them. Everything has never been used but was installed and left sitting outside for 6 months. There is a set of air bags,lower control arms,disc brake kit,new ball joints and tie rod ends, and 2.5" drop spindles. The bags are slam 7's and the arms are air ride tech.(this what I was told) Don't know what brand the spindles or disc brake kit are. What do you all think this stuff is worth? Thanks for any help/advise you can give. Mark Attached Images

02-11-2008, 12:49 PM	#2
ryan913 Registered User Join Date: Jan 2008 Location: kenton, oh Posts: 183	Re: Anyone know what brand of A arm this is? Do you also get the sub frame? If not you will need to grind off the upper airbag mounting plate. To give you an idea, the parts cost well over $500.00 new.

02-11-2008, 01:33 PM	#3
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Anyone know what brand of A arm this is? Lower arms retail for $499. Bags are $75 a piece. That's $650 new for those two items alone. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

02-11-2008, 09:12 PM	#4
nhtc33d Registered User Join Date: Dec 2007 Location: PA Posts: 326	Re: Anyone know what brand of A arm this is? I could have subframe but I don't think I will take it. The seller said he will remove the parts and meet me to pick them up. That will save me 5 hours of driving.(I have never seen the parts in person just pictures) Do you think the A arms are from Air Ride Tech?(Are tubular A arms all about the same?) Thanks much!!!

02-12-2008, 12:39 AM	#5
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Anyone know what brand of A arm this is? Not all tube arms are the same... those are ART arms for sure. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

02-12-2008, 01:38 AM	#7
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Anyone know what brand of A arm this is? The ART arms as as good as it gets for quality. A few guys think they are "overpriced", but I haven't ever heard complaints on quality. How mych does the guy want... and what exactly are you getting? __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

02-12-2008, 06:14 AM	#8
ryan913 Registered User Join Date: Jan 2008 Location: kenton, oh Posts: 183	Re: Anyone know what brand of A arm this is? I still think you should grab the subframe to have the complete system.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.