|
02-15-2008, 12:20 PM
|
#1 |
|
Registered User
Join Date: May 2002
Location: NJ
Posts: 910
|
Parts For Sale-headers-cam-engine
I have the following parts for sale. All engine parts are used and for a Small Block Chevy.
1. Trick Flow heads-SOLD 2. '74 350 2-bolt long block. It needs a rebuild. BO 3. '74 355 4-bolt short block assembly. Original 4-bolt block, cast crank and rods, forged pistons. Will include all new bearings. Needs to be assembled. I can help with delivery if within a reasonable distance, just pay for gas. Machine Shop work: cleaned honed new cam bearings polished crank new bearings new rings $800 or BO 4. Comp Cams Hydraulic Flat Tappet Cam w/ lifters and springs. Springs are matched to the cam. P/N for the cam is 12-254-3. Specs: .519 intake lift, .523 exhaust lift, 294 intake duration, 306 exhaust duration at tappet lift. 250, 256 at .050 lift. 110 lobe separation. I have original box and cam card. $275 or BO, plus shipping 5. Cammotion Hydraulic Roller Cam w/springs, NO lifters. Custom ground cam, Grind Number: X2371-24410-10. Specs: .580 intake lift, .592 exhaust lift (w/1.6 rockers), 239 intake duration, 247 exhaust duration @ .050 lift. 110 lobe separation. I have original box and cam card. $275 or BO, Plus shipping 6. Summit 2" Drop Springs. SOLD 7. Hedman Headers. Long Tube Headers for 73-86 Chevy C10 w/SBC. They are in good condition, with black header paint. I painted them before I used them and baked the paint on. The paint looks ok and it has kept the headers in good condition. They have a 3" Flowmaster ball flange collector on the end. The ball flange doesn't require a gasket and works great. I also have an O2 bung in each header (running aftermarket EFI). They are 1-5/8" primaries, no dents or dings. HEDMAN P/N 69090 $60 or BO Please ask any questions. If you buy multiple items I will make a deal. Thanks, Joe
__________________
83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo=  Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 03-20-2008 at 02:09 PM. Reason: added Hedman Header P/N |
|
|
|
02-15-2008, 12:27 PM
|
#2 |
|
Still Just Havin Some Fun!
 
Join Date: Jun 2007
Location: Piedmont, Oklahoma
Posts: 1,145
|
Re: Parts For Sale
I couldnt finf the part # on the web site. are these alum or iron heads?
Trick Flow heads-195cc intake runners, 2.02 intake and 1.60 exhaust valves. Pushrod guide plates, 3/8" rocker arm studs. All original, no port work done. I have more info if you want, just ask. P/N: TFS-31400001. Currently installed are the springs for the Cammotion cam listed below. If you buy one of the cams with the heads I will install the springs for that cam otherwise I will install springs for your cam or original type springs. $725 or BO plus shipping
__________________
a green one with some stuff done to it.... |
|
|
|
|
02-15-2008, 01:03 PM
|
#3 |
|
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
Re: Parts For Sale
I found a part number of tfs-3040001 that matches his description. 62 cc chambers and aluminum construction. Summit has them listed a 1025.00. Sounds good--- pending how used.
__________________
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit. Last edited by jay6891; 02-15-2008 at 01:23 PM. |
|
|
|
|
02-15-2008, 11:21 PM
|
#4 |
|
Registered User
Join Date: May 2002
Location: NJ
Posts: 910
|
Re: Parts For Sale
They are aluminum heads. I must have screwed up the P/N somehow. I will double check it when I get home. I'm pretty sure they are 64cc heads, not 62cc. I have the original documents that came with the heads and that has all of the correct information on it.
__________________
83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time |
|
|
|
|
02-15-2008, 11:30 PM
|
#5 |
|
Still Just Havin Some Fun!
Join Date: Jun 2007
Location: Piedmont, Oklahoma
Posts: 1,145
|
Re: Parts For Sale
let me know. I am about to build my engine and this would be a nice addition
__________________
a green one with some stuff done to it.... |
|
|
|
|
02-16-2008, 12:21 AM
|
#6 |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: Parts For Sale
I'd be interested in the heads if they weren't angle plug heads. My headers only work with straight plug heads
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
|
|
|
|
02-16-2008, 03:48 AM
|
#7 |
|
Registered User
Join Date: Dec 2004
Location: Northern AZ
Posts: 7,271
|
Re: Parts For Sale
I guess third on the heads and maybe roller cam.
|
|
|
|
|
02-16-2008, 03:52 AM
|
#8 |
|
Registered User
Join Date: Dec 2004
Location: Northern AZ
Posts: 7,271
|
Re: Parts For Sale
I looked up the second number and it shows an LT1 head? If they are Lt heads they will only fit an LT1 or 4. LMK for sure what they are, picts etc.
|
|
|
|
|
02-16-2008, 06:30 AM
|
#9 |
|
Registered User
Join Date: May 2002
Location: NJ
Posts: 910
|
Re: Parts For Sale
Ok just pulled out the documents I got with the heads and the correct P/N is TFS-30400001. They are 64cc heads not 62cc heads. Trick Flow now list this head as TFS-30400001-CNC. The heads are for a gen 1 small block chevy. I had them on the '74 350 listed above. I can take any pictures you want. They are in good condition.
I'm selling everything because I just bought a 383 rotating assembly and I am going with a bigger cam, heads and headers. I actually forgot to list the headers. Let me know if you have anymore questions.
__________________
83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time |
|
|
|
|
02-18-2008, 07:53 AM
|
#11 |
|
Luv the Crewcabs
Join Date: Aug 2006
Location: Andrews, In. 46702
Posts: 4,097
|
Re: Parts For Sale
6. Summit 2" Drop Springs. Used on '83 Chevy 1/2 ton. Will fit 73-86, maybe 67-72? Powder Coated Blue. P/N: SUM-G727
$50 or BO PM Sent............. Rick
__________________
55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde |
|
|
|
|
03-02-2008, 08:12 PM
|
#12 |
|
Registered User
Join Date: May 2002
Location: NJ
Posts: 910
|
Re: Parts For Sale
Heads are listed on ebay now:
http://cgi.ebay.com/ebaymotors/ws/eB...MESE:IT&ih=019
__________________
83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time |
|
|
|
|
03-09-2008, 11:37 PM
|
#13 |
|
Registered User
Join Date: May 2002
Location: NJ
Posts: 910
|
Re: Parts For Sale
HEADS are SOLD
__________________
83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time |
|
|
|
|
03-10-2008, 03:59 AM
|
#14 |
|
Registered User
Join Date: Aug 2007
Location: Turners Station,Ky
Posts: 842
|
Re: Parts For Sale
Id be interested in pics of the headers. Will they work on an 67-72 chevy truck. And would you take $60 shipped
__________________
My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831 |
|
|
|
|
03-10-2008, 04:15 AM
|
#15 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Parts For Sale
if rick bails on the springs... let me know the shipping... I am very interested
|
|
|
|
|
03-19-2008, 02:33 AM
|
#16 |
|
Registered User
Join Date: May 2002
Location: NJ
Posts: 910
|
Re: Parts For Sale
Springs are sold. Thanks Longhorn!
__________________
83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time |
|
|
|
|
03-19-2008, 04:02 AM
|
#17 |
|
Justified!
Join Date: Apr 2007
Location: Valencia, Ca
Posts: 1,366
|
Re: Parts For Sale
shipping on the headers to 35806?
Thanks Chad
__________________
Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny 
Last edited by 64GMCHorsepower; 03-19-2008 at 04:02 AM. |
|
|
|
|
03-19-2008, 04:59 AM
|
#18 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Parts For Sale
nope... thank you.
The burb will be pimpin! |
|
|
|
|
03-19-2008, 07:01 AM
|
#19 |
|
Registered User
Join Date: Aug 2007
Location: Kaysville, Utah
Posts: 119
|
Re: Parts For Sale
I will jump in line on the headers. Let us know where you are at on them. Shipping to 84037. Thanks.
|
|
|
|
|
03-23-2008, 01:30 AM
|
#20 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Parts For Sale
Thanks for the springs!
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
