3 point seat belt install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hellrazrblade · 03-11-2008, 05:56 AM

Will something like this work for a 3 point harness install (bolt to stock holes in the floor and bolt to the roll bar up top)?
http://www.autopartswarehouse.com/de...l?reviews=true

These also look really slick, if they'll work in a blazer, and not just a truck.
http://www.julianos.com/how2_67chevy_truck.html

The belts in my truck are if'y at best, and I'm getting concerned. Any help would be great, but I'm gonna have to just make something work pretty soon.
Thanks!

Husker · 03-11-2008, 07:31 AM

They should, there universal. You can probaly find the same belts a little cheaper though.
This is probaly the route I will go.
Ron

**truckster** · 03-12-2008, 02:54 AM

I put a 98 Silverado seat in mine. I used the stock locations for the seat belts and bolted the shoulder belt to the roll bar. It works fine. Of course, I haven't crashed it into a barrier to test it...

hellrazrblade · 03-14-2008, 07:26 AM

Quote:

Originally Posted by truckster

I put a 98 Silverado seat in mine. I used the stock locations for the seat belts and bolted the shoulder belt to the roll bar. It works fine. Of course, I haven't crashed it into a barrier to test it...

well, don't try it out on my account. it'd be a shame. Did you use stock bolts or hardware store? my stock bolts are way gone.

**7D2N** · 03-15-2008, 06:15 AM

This helps a bunch, does it seem to make difference how the belt works if you mount to out side of roll verses inside of cab.

Thanks

7D2N

**truckster** · 03-15-2008, 08:13 PM

Quote:

Originally Posted by hellrazrblade

well, don't try it out on my account. it'd be a shame. Did you use stock bolts or hardware store? my stock bolts are way gone.

I'm not planning on it. I used grade 8 bolts from my favorite hardware store. I buy nuts and bolts at a store called CAL Ranch because they still sell by the pound.

stokers · 03-17-2008, 12:32 AM

The ones on the autoparts link should work. I just had a roll cage built for my '69 using those exact belts. The female end has a short and somewhat flexible rod that bolts to the floor. I suggest using an L-Bracket on the floor so when bolted in it sits right and you don't have to torque the female buckle to make it click.

03-11-2008, 05:56 AM	#1
hellrazrblade Purple People Eater Join Date: Dec 2006 Location: Houston Posts: 53	3 point seat belt install Will something like this work for a 3 point harness install (bolt to stock holes in the floor and bolt to the roll bar up top)? http://www.autopartswarehouse.com/de...l?reviews=true These also look really slick, if they'll work in a blazer, and not just a truck. http://www.julianos.com/how2_67chevy_truck.html The belts in my truck are if'y at best, and I'm getting concerned. Any help would be great, but I'm gonna have to just make something work pretty soon. Thanks! __________________ 1971 K5 Blazer 396ci/TH400/NP205/Dana 44/GM 12 Bolt/38" TSLs 2004 Chevy 1500 4X2 X-Cab 327ci

03-11-2008, 07:31 AM	#2
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: 3 point seat belt install They should, there universal. You can probaly find the same belts a little cheaper though. This is probaly the route I will go. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

03-12-2008, 02:54 AM	#3
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Re: 3 point seat belt install I put a 98 Silverado seat in mine. I used the stock locations for the seat belts and bolted the shoulder belt to the roll bar. It works fine. Of course, I haven't crashed it into a barrier to test it...

03-15-2008, 06:15 AM	#5
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 718	Re: 3 point seat belt install This helps a bunch, does it seem to make difference how the belt works if you mount to out side of roll verses inside of cab. Thanks 7D2N

03-17-2008, 12:32 AM	#7
stokers Registered User Join Date: Aug 2007 Location: Lexington, KY Posts: 33	Re: 3 point seat belt install The ones on the autoparts link should work. I just had a roll cage built for my '69 using those exact belts. The female end has a short and somewhat flexible rod that bolts to the floor. I suggest using an L-Bracket on the floor so when bolted in it sits right and you don't have to torque the female buckle to make it click.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.