SWB 1 piece driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 03-31-2008, 04:32 AM

Bought this off the board a few years ago. Never ended up using it. No yoke. $65 shipped.

**thelonerife** · 03-31-2008, 04:59 AM

If this will fit a swb w/a turbo 350 I'll take it.Can I get a measurement?

Burnsman · 03-31-2008, 06:20 AM

It was supposedly out of a 72 swb w/ th350. I measured it and came up with about 55" center to center of u-joints. Brian

**thelonerife** · 03-31-2008, 06:36 AM

Well, mine is 56 1/2'' and its too short. I think it needs to be about 58 1/2'' so, I'll pass. Good price though. Chuck.

Burnsman · 03-31-2008, 07:06 AM

So you must have a short shaft th350? Brian

*1972Ryan* · 03-31-2008, 07:06 AM

interested pending measurement on mine in the morning.

DMARCUM123 · 03-31-2008, 10:20 AM

what is the width of the drive shaft from outside to out side i might be able to use it

Burnsman · 03-31-2008, 11:09 PM

Not sure what you mean outside to outside???? From center of u-joint to center of u-joint is 55". Brian

*1972Ryan* · 04-01-2008, 12:30 AM

I'll have to pass mine takes one a little longer.

*1972Ryan* · 04-01-2008, 12:31 AM

I'll have to pass, I need a longer one as well.

DMARCUM123 · 04-01-2008, 01:54 AM

how wide the u jiont is

Burnsman · 04-01-2008, 03:56 PM

3 1/4". Brian

03-31-2008, 04:32 AM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	SWB 1 piece driveshaft Bought this off the board a few years ago. Never ended up using it. No yoke. $65 shipped. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

03-31-2008, 04:59 AM	#2
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: SWB 1 piece driveshaft If this will fit a swb w/a turbo 350 I'll take it.Can I get a measurement? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687 Last edited by thelonerife; 03-31-2008 at 05:00 AM.

03-31-2008, 06:20 AM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: SWB 1 piece driveshaft It was supposedly out of a 72 swb w/ th350. I measured it and came up with about 55" center to center of u-joints. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

03-31-2008, 06:36 AM	#4
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: SWB 1 piece driveshaft Well, mine is 56 1/2'' and its too short. I think it needs to be about 58 1/2'' so, I'll pass. Good price though. Chuck. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

03-31-2008, 07:06 AM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: SWB 1 piece driveshaft So you must have a short shaft th350? Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

03-31-2008, 07:06 AM	#6
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: SWB 1 piece driveshaft interested pending measurement on mine in the morning.

03-31-2008, 10:20 AM	#7
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: SWB 1 piece driveshaft what is the width of the drive shaft from outside to out side i might be able to use it

03-31-2008, 11:09 PM	#8
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: SWB 1 piece driveshaft Not sure what you mean outside to outside???? From center of u-joint to center of u-joint is 55". Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-01-2008, 12:30 AM	#9
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: SWB 1 piece driveshaft I'll have to pass mine takes one a little longer.

04-01-2008, 12:31 AM	#10
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: SWB 1 piece driveshaft I'll have to pass, I need a longer one as well.

04-01-2008, 01:54 AM	#11
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: SWB 1 piece driveshaft how wide the u jiont is

04-01-2008, 03:56 PM	#12
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: SWB 1 piece driveshaft 3 1/4". Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.