Finally making some progress! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Raven Lunatic · 04-02-2008, 12:43 AM

My bare frame has been sitting in the garage collecting dust for a few years now, but finally scraped together enough cash to get a decent start. /Users/David/Pictures/'67 GMC File/Rebuild Pics/controlarm3.JPG
Then, air ride suspension from

Raven Lunatic · 04-02-2008, 12:56 AM

Crap, I screwed that up. Hang on while I try to figger this out.

Raven Lunatic · 04-02-2008, 01:03 AM

Try this again...

Powdercoated everything, installed new pivot shafts, bearings, ball joints.

Air bag system from Slam Specialties... excellent service and quality, BTW...

Raven Lunatic · 04-02-2008, 01:04 AM

One more...

Highsteel · 04-02-2008, 01:09 AM

Way nice!

ed2552 · 04-02-2008, 01:11 AM

That is going to be a nice truck. What are you going to run for a motor, trans, rearend? What color is the body going to be?

Sinister · 04-02-2008, 01:11 AM

That looks sweet, but white looks like it's going to be a b!#ch to keep clean.

Raven Lunatic · 04-02-2008, 01:14 AM

Due to budget constraints, I think I'll just go with the 350 that's in it now... with 700r4 trans, not sure about the rear gears... gotta do more research on that. As far as color goes, I always wanted caddillac (sp?) diamond white, but like the look of the silver trucks I've seen on here...

ed2552 · 04-02-2008, 01:19 AM

cadillac

Raven Lunatic · 04-03-2008, 01:19 AM

Ya, the white thing... I'm kind of anal about keeping my vehicles clean, so I'm thinking that having the frame white will force me to keep it spotless. Just wish I hadn't used the same logic with my garage floor... ugh...

Cyclone44 · 04-03-2008, 01:55 AM

Quote:

Originally Posted by Sinister

That looks sweet, but white looks like it's going to be a b!#ch to keep clean.

That is nice...But it will be hard to keep it clean...No rainy day driving..

04-02-2008, 12:43 AM	#1
Raven Lunatic On the Hillbilly Highway Join Date: Nov 2002 Location: Edmonton, Alberta Posts: 90	Finally making some progress! My bare frame has been sitting in the garage collecting dust for a few years now, but finally scraped together enough cash to get a decent start. /Users/David/Pictures/'67 GMC File/Rebuild Pics/controlarm3.JPG Then, air ride suspension from __________________ Does anyone else smell smoke? 1967 GMC 910, rolling frame coming soon!

04-02-2008, 12:56 AM	#2
Raven Lunatic On the Hillbilly Highway Join Date: Nov 2002 Location: Edmonton, Alberta Posts: 90	Re: Finally making some progress! Crap, I screwed that up. Hang on while I try to figger this out. __________________ Does anyone else smell smoke? 1967 GMC 910, rolling frame coming soon!

04-02-2008, 01:03 AM	#3
Raven Lunatic On the Hillbilly Highway Join Date: Nov 2002 Location: Edmonton, Alberta Posts: 90	Re: Finally making some progress! Try this again... Powdercoated everything, installed new pivot shafts, bearings, ball joints. Air bag system from Slam Specialties... excellent service and quality, BTW... Attached Images __________________ Does anyone else smell smoke? 1967 GMC 910, rolling frame coming soon!

04-02-2008, 01:04 AM	#4
Raven Lunatic On the Hillbilly Highway Join Date: Nov 2002 Location: Edmonton, Alberta Posts: 90	Re: Finally making some progress! One more... Attached Images __________________ Does anyone else smell smoke? 1967 GMC 910, rolling frame coming soon!

04-02-2008, 01:09 AM	#5
Highsteel Chasin' the Dream Join Date: Mar 2008 Location: Lost in the 70's Posts: 200	Re: Finally making some progress! Way nice!

04-02-2008, 01:11 AM	#6
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: Finally making some progress! That is going to be a nice truck. What are you going to run for a motor, trans, rearend? What color is the body going to be? __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

04-02-2008, 01:11 AM	#7
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Finally making some progress! That looks sweet, but white looks like it's going to be a b!#ch to keep clean. __________________ Beat it to fit, Paint it to match...

04-02-2008, 01:14 AM	#8
Raven Lunatic On the Hillbilly Highway Join Date: Nov 2002 Location: Edmonton, Alberta Posts: 90	Re: Finally making some progress! Due to budget constraints, I think I'll just go with the 350 that's in it now... with 700r4 trans, not sure about the rear gears... gotta do more research on that. As far as color goes, I always wanted caddillac (sp?) diamond white, but like the look of the silver trucks I've seen on here... __________________ Does anyone else smell smoke? 1967 GMC 910, rolling frame coming soon!

04-02-2008, 01:19 AM	#9
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: Finally making some progress! cadillac __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

04-03-2008, 01:19 AM	#10
Raven Lunatic On the Hillbilly Highway Join Date: Nov 2002 Location: Edmonton, Alberta Posts: 90	Re: Finally making some progress! Ya, the white thing... I'm kind of anal about keeping my vehicles clean, so I'm thinking that having the frame white will force me to keep it spotless. Just wish I hadn't used the same logic with my garage floor... ugh... __________________ Does anyone else smell smoke? 1967 GMC 910, rolling frame coming soon!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.