The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-12-2008, 11:31 PM   #1
chazmonro
Registered User
 
Join Date: Apr 2008
Location: Elgin, IL
Posts: 4
Going To Look at My First Truck (maybe)

Hey I'm a noobie on this forum, I have been thinking about getting my hands on an old 67 - 72 pickup for some time, and I'm actually going to look at one this weekend... the guy tells me its a 71... I've already seen it once, and it looks amazingly clean, so I am wondering what I should look for or keep an eye out for. One thing I've already noticed and I have seen this on other trucks is a silver door on the side of the bed, I think its for an auxilary fuel tank of some sort, but I have no idea... any advice on what I should look for? Its been painted, so I want to check for bondo or body damage, where are the most likely locations for trouble?

I'll post some pics of the truck tomorrow after I get back from looking at it, so you guys can tell me what you think. I'm looking for a driver that I can have some fun with.

Other than getting the fuel tank out of the cab, what is the number 1 modification you guys typically do to these trucks?

Chuck
chazmonro is offline   Reply With Quote
Old 04-12-2008, 11:51 PM   #2
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Going To Look at My First Truck (maybe)

Welcome to the board.
Being you are in Illinois, the common rust areas of these trucks is from the frame to roof, and front to back.
No, not much of an exaduration. Look everywhere, the whole lower portion of the cab, the upper cab over the windshield on the inside, the fenders, the whole bed side esp over the wheel openings... I don't know WHAT illinois does to make there stuff rust so bad, but it is one of... if not THE, worst state for this IMO.
In all reality, depending on your price range, you might wanna look out of state for a truck.
Longhorn Man is offline   Reply With Quote
Old 04-13-2008, 01:07 AM   #3
chazmonro
Registered User
 
Join Date: Apr 2008
Location: Elgin, IL
Posts: 4
Re: Going To Look at My First Truck (maybe)

Its the salt... we salt the roads with a really nasty salt in the winter time. And they salt the instant it gets cold enough to freeze.

As for this truck, I was thinking of bringing a magnet and see if there are any spots where the it won't stick to the truck, the roof looks good, and so did the bed, I'm thinking this has to be a truck from out of state, because its... well its in one piece, so that must mean its from out of state.

I'm sure the floors are the most telling, for most vehicles of that era, the floors seemed to rust away.

The guy wants 5000 for it, I'm hoping to talk him down... but I don't think he'll come down very far seeing the sticker on the window says 6500. This alone may be a problem because thats far beyond my budget, but we'll see.

Chuck
chazmonro is offline   Reply With Quote
Old 04-13-2008, 01:12 AM   #4
420am
Registered User
 
420am's Avatar
 
Join Date: Feb 2008
Location: Madison, WI
Posts: 357
Re: Going To Look at My First Truck (maybe)

Quote:
Originally Posted by chazmonro View Post
Its the salt... we salt the roads with a really nasty salt in the winter time. And they salt the instant it gets cold enough to freeze.

As for this truck, I was thinking of bringing a magnet and see if there are any spots where the it won't stick to the truck, the roof looks good, and so did the bed, I'm thinking this has to be a truck from out of state, because its... well its in one piece, so that must mean its from out of state.

I'm sure the floors are the most telling, for most vehicles of that era, the floors seemed to rust away.

The guy wants 5000 for it, I'm hoping to talk him down... but I don't think he'll come down very far seeing the sticker on the window says 6500. This alone may be a problem because thats far beyond my budget, but we'll see.

Chuck
I'd do some more research and ask a few more questions before I'd drop much that on a truck. Seems like a big gamble right now especially if it's against your budget already. I'd almost bet for that much you can find a truck with solid cab corners, rockers and floor.
__________________
1972 Long Bed Cheyenne
Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=285282

Waste my bandwidth and listen to some great tunes >> http://www.radioxenu.com (Live Shows with yours truly every Friday)
420am is offline   Reply With Quote
Old 04-13-2008, 01:50 AM   #5
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
Re: Going To Look at My First Truck (maybe)

Be sure to check the trucks for sale part of the board. There are quite a few slick trucks for sale.

Also, welcome to the board from Mid-MO!!!
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 04-13-2008, 01:55 AM   #6
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Going To Look at My First Truck (maybe)

they throw the salt and brine (way worse than salt) here too... but the vehicles from Illinois always seem worse.
It sounds like you have an idea what to look for.. .the bottoms of the doors are known for rotting out too. Look in the bottom corner where they sheet metal is wrapped around the frame, look to see if it looks like bondo, or painted rust, or real metal... I normally find that as a good place to look to see what kind of condition its in/what kind of body work has been done.
The fire wall is another place that rots out, and the kick panels inside the cab. If it has coil springs in the back, crawl under and take a real good look at the long trailing arms. Those are very hard to find in good shape in our part of the country, and would be a pretty good indication if it is from another part of the country.
If you can get pics of it from inside, underneath, under hood, and close ups of questionable body parts, we can help look it over on here.
Longhorn Man is offline   Reply With Quote
Old 04-13-2008, 03:34 AM   #7
chazmonro
Registered User
 
Join Date: Apr 2008
Location: Elgin, IL
Posts: 4
Re: Going To Look at My First Truck (maybe)

I did look it over last week, not super close, but close enough that I didn't notice any of the tell tale signs, for example, I didn't look at the doors, thats a good tip, I probably would have thought of it, but thats why I ask.

I'll take lots of pics. But just by the condition of the majority of the truck, I'm thinking its not an illinois vehicle. But I could be wrong. I'll post some pics tomorrow.

Thanks for the welcome... These trucks are cool man, I've always dug them, though I don't understand the 3 door suburban, its cool and all, but why only 3 doors? I guess its like the old minivans, only a door on the passanger side...

That taho project in the suburban forum is awesome! I love the suburbans too.

Chuck
chazmonro is offline   Reply With Quote
Old 04-13-2008, 03:43 AM   #8
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Going To Look at My First Truck (maybe)

that's just the way they did it. 67 was the first year for the 3 door, before that, they were all 2 door burbs.
Longhorn Man is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com