04-13-2008, 05:57 AM | #1 |
Registered User
Join Date: Sep 2007
Location: Brooks alberta canada
Posts: 85
|
16x10 backspacing Question.
hey guys, help me out if you dont mind. 68 swb fleetside. ordering my wheels and need to know if anyone can tell me the approx backspace i will need to keep a 10 inch wide rear wheel just inside the rear fender enough to tuck a little. Suspension is a 4/6 drop roughly and wheels will be Wheel Vintiques corvette style rallye. Also swapped in all 5 bolt hubs etc. i know, should have done my measuring before disasembly but hindsight is 20/20. Thanks
Last edited by flat68; 04-13-2008 at 08:22 AM. |
04-13-2008, 06:21 AM | #2 |
Senior Member
Join Date: Sep 2004
Location: Terrell, TX
Posts: 1,967
|
Re: 16x10's
I am pretty sure it's 4.25" backspacing but I will leave it to the gurus to confirm it.
__________________
Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps. |
04-13-2008, 08:19 AM | #3 |
Registered User
Join Date: Sep 2007
Location: Brooks alberta canada
Posts: 85
|
Re: 16x10's
bump
|
04-13-2008, 03:52 PM | #4 |
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Re: 16x10's
I'm running 4.75" on a 17x9.5" rim. I'm sure I could have ran 5" and it fit fine. Mine is a 72 so the width of the axle might be different.
|
04-13-2008, 07:05 PM | #5 |
Registered User
Join Date: Sep 2007
Location: Brooks alberta canada
Posts: 85
|
Re: 16x10's
all hubs and rear end is all 72' 5 stud
|
04-13-2008, 07:33 PM | #6 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: 16x10 backspacing Question.
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|