|
06-18-2008, 04:09 AM
|
#1 |
|
drive it till it dies
Join Date: Apr 2007
Location: Larose, LA
Posts: 274
|
door hinges??
what is an easy way if any to fix sagging doors. my drivers side door rubs on the bottom of the door jam when i close it. its already rubbed some of the paint off.
__________________
 live life to the fullest
|
|
|
|
06-18-2008, 04:25 AM
|
#2 |
|
Registered User
Join Date: Dec 2007
Location: Santa Maria, Ca.
Posts: 57
|
Re: door hinges??
If you open the door and gently move it up and down you can see if the play is in the hinge and pin itself or if you just need to re-adjust your doors through the hinge bolts. I have had my doors on and off quite a bit, and they are a pain to get lined up rite.
|
|
|
|
|
06-18-2008, 06:59 AM
|
#3 |
|
Old Skool Club
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: door hinges??
I am going to hazard a guess that it is the hinge pins that should be replaced, not the hinges. At least, they're cheaper and may be all you need to do. If not, you'll know what to do.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
|
|
|
|
06-18-2008, 07:21 AM
|
#4 |
|
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: door hinges??
Advance Auto & Auto Zone & others, have door hinge kits for around $10. Also, you can get the hinge bushings from GM dealers.
__________________
1997 GMC Sierra Ext 1965 Mustang |
|
|
|
|
06-18-2008, 07:51 AM
|
#5 | |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
Re: door hinges??
Quote:
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
|
|
|
|
|
06-18-2008, 08:01 AM
|
#6 |
|
Prestige Worldwide
Join Date: Feb 2001
Location: Worldwide
Posts: 2,552
|
Re: door hinges??
|
|
|
|
|
06-18-2008, 07:09 PM
|
#7 |
|
Account Suspended
Join Date: Jul 2006
Location: DFW
Posts: 1,427
|
Re: door hinges??
If there's a red help section the P/N is 38400. You'll need 4. For example:
http://www.rockauto.com/catalog/rafr...0&a=FR42-38400 BTW: The old pins can be pretty easy, or really hard to get out. Last edited by 72lb4x4; 06-18-2008 at 07:13 PM. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
