typical drop spindle problem? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tom · 02-06-2003, 09:36 PM

I put on my DJM 3" spindles last night [5" total now] and went to drive it today when I got a bad grinding noise. Get out and look and the top of my brake caliper is grinding againts the inside of my rim. Its the caliper bracket, not the actual caliper. Is this normal? They are 15" rims and the a-arms are not hitting.

Izzy · 02-06-2003, 10:37 PM

Yes it's common. I had that prob with my 95+ wheels. I had to grind off about 3/4" inch off the top w/ an angle grinder.

ocbaud · 02-06-2003, 10:43 PM

i knew bout the lower control arm problems, but not this.

but atleast you didnt have to hammer your calipers into the spindles like i did

Izzy · 02-06-2003, 10:48 PM

Quote:

Originally posted by ocbaud
i knew bout the lower control arm problems, but not this.

but atleast you didnt have to hammer your calipers into the spindles like i did

Spindles always have some issue.
73-87 may rub the wheel on the top edge
88-98 rubs the LCA "rain gutter" on stockers
99-03 lose half of the turning radius

Tom · 02-07-2003, 12:09 AM

Quote:

Originally posted by ocbaud

but atleast you didnt have to hammer your calipers into the spindles like i did

Well, actually, I did

But thats no biggie. Had to do that to my 78 with belltechs too. My 78 had the a-arms hit the rims. Always a new problem. So I went out and bought a die grinder tonight. I love new power tools :p

02-06-2003, 09:36 PM	#1
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	typical drop spindle problem? I put on my DJM 3" spindles last night [5" total now] and went to drive it today when I got a bad grinding noise. Get out and look and the top of my brake caliper is grinding againts the inside of my rim. Its the caliper bracket, not the actual caliper. Is this normal? They are 15" rims and the a-arms are not hitting. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-06-2003, 10:37 PM	#2
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Yes it's common. I had that prob with my 95+ wheels. I had to grind off about 3/4" inch off the top w/ an angle grinder.

02-06-2003, 10:43 PM	#3
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i knew bout the lower control arm problems, but not this. but atleast you didnt have to hammer your calipers into the spindles like i did



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.