PARTING: 1969 GMC 3/4 ton - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 07-20-2008, 06:39 PM

Driver's side cup is ok, no rust through, but a little dented on the bottom (easy fix).

I wasn't able to get to anything else this weekend guys. Our daily driver dropped a load on itself and I've spent all weekend and way too much money trying to fix it. Still no luck

I'll let you guys know when I get to this truck.

1971c20 · 07-20-2008, 06:55 PM

allright no prob.

Frizzle Fry · 07-24-2008, 11:16 AM

1971c20,

The wheels are off. What a PITA that was. Now the truck sits nice and low

bills68panel · 07-24-2008, 01:00 PM

I am looking for the corner brackets that connect the rad. support th the fenders????? give me a call bill 469-964-9282

Frizzle Fry · 07-24-2008, 09:28 PM

Here they are. No rot but they have some nice "patina"

They should clean up fine though. $15 Shipped

bills68panel · 07-25-2008, 04:55 PM

i'll take them. let me know how you want to do this. send me a pm and i'll give you my # thanks

1971c20 · 07-25-2008, 05:08 PM

hey thanks i should be able to come out this weekend, ill let you know when i can come down.

Frizzle Fry · 07-25-2008, 07:24 PM

Quote:

Originally Posted by 1971c20

hey thanks i should be able to come out this weekend, ill let you know when i can come down.

I'm working nights starting tonight through Wed morning. I'll be available in the mornings (8-9:30AM) or afternoons (4-6:30PM). I'll PM you my number.

Frizzle Fry · 07-25-2008, 07:32 PM

Quote:

Originally Posted by bills68panel

i'll take them. let me know how you want to do this. send me a pm and i'll give you my # thanks

Hey Bill,

I just pulled those off and they look worse than I expected. Still no rot through but a couple deeper spots and the PS has two cracks in the corner (not visible when installed). Here are the pics. Let me know if you still want them. If not I'll reverse the Paypal.

bills68panel · 07-26-2008, 10:45 AM

i'm sorry man your right I better hold off. thanks

low'n slow · 07-26-2008, 10:12 PM

How is the grill? It looks like the pass side is bent.

Frizzle Fry · 07-26-2008, 11:42 PM

Pass side is bent in two spots. Fixable for a driver. $35 plus ride.

low'n slow · 07-27-2008, 05:20 PM

Quote:

Originally Posted by Frizzle Fry

Pass side is bent in two spots. Fixable for a driver. $35 plus ride.

Shipping to 88005?

Frizzle Fry · 07-29-2008, 05:02 AM

Quote:

Originally Posted by low'n slow

Shipping to 88005?

FedEx quoted $31.78 for 3 day.

walker · 07-30-2008, 07:45 PM

Do you have the visors, if so what color are they and how much?

cory321 · 07-30-2008, 08:24 PM

How is the front light harness.Is there any splices or burnt wires.

Frizzle Fry · 07-31-2008, 05:16 AM

Quote:

Originally Posted by walker

Do you have the visors, if so what color are they and how much?

They are there; one is Black and one is bare (cover missing). $10+ride for everything with rods etc.

Quote:

Originally Posted by cory321

How is the front light harness.Is there any splices or burnt wires.

I'll take a look in the morning and let you know.

wrangler94 · 07-31-2008, 06:15 PM

what gears were in the rear? if it's 5.13 i'm interested.

Frizzle Fry · 08-01-2008, 01:25 AM

Quote:

Originally Posted by wrangler94

what gears were in the rear? if it's 5.13 i'm interested.

I'll take a look.

be_el · 08-12-2008, 06:40 PM

Does the truck have power steering? If so how much for the steering gear to 77041? Thanks in advance

**CPNE** · 08-12-2008, 09:20 PM

I'm interested in headlight wiring harness too, even if it's spliced. Let me know, thanks.

red71cheyenne · 08-12-2008, 10:33 PM

Friz, what kind of transfer case does it have? Looking for the torsion mount for a T220.

Frizzle Fry · 08-12-2008, 11:24 PM

Sorry I didn't see this was bumped. I've been extremely busy the past two weeks.

be_el: no PS

CPNE: I'll get some pics and a price up.

red71cheyenne: it's a 2wd

cory321 · 08-13-2008, 05:56 PM

I'm going to pass on the light harness.

red71cheyenne · 08-14-2008, 07:50 AM

Der...C20. My bad.

07-20-2008, 06:39 PM	#51
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: PARTING: 1969 GMC 3/4 ton Driver's side cup is ok, no rust through, but a little dented on the bottom (easy fix). I wasn't able to get to anything else this weekend guys. Our daily driver dropped a load on itself and I've spent all weekend and way too much money trying to fix it. Still no luck I'll let you guys know when I get to this truck.

07-20-2008, 06:55 PM	#52
1971c20 Registered User Join Date: Jul 2008 Location: Vancouver Washin-tin Posts: 168	Re: PARTING: 1969 GMC 3/4 ton allright no prob.

07-24-2008, 11:16 AM	#53
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: PARTING: 1969 GMC 3/4 ton 1971c20, The wheels are off. What a PITA that was. Now the truck sits nice and low Attached Images

07-24-2008, 01:00 PM	#54
bills68panel Registered User Join Date: Jul 2006 Location: terrell tx. Posts: 67	Re: PARTING: 1969 GMC 3/4 ton I am looking for the corner brackets that connect the rad. support th the fenders????? give me a call bill 469-964-9282

07-24-2008, 09:28 PM	#55
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: PARTING: 1969 GMC 3/4 ton Here they are. No rot but they have some nice "patina" They should clean up fine though. $15 Shipped Attached Images

07-25-2008, 04:55 PM	#56
bills68panel Registered User Join Date: Jul 2006 Location: terrell tx. Posts: 67	Re: PARTING: 1969 GMC 3/4 ton i'll take them. let me know how you want to do this. send me a pm and i'll give you my # thanks

07-25-2008, 05:08 PM	#57
1971c20 Registered User Join Date: Jul 2008 Location: Vancouver Washin-tin Posts: 168	Re: PARTING: 1969 GMC 3/4 ton hey thanks i should be able to come out this weekend, ill let you know when i can come down.

07-26-2008, 10:45 AM	#60
bills68panel Registered User Join Date: Jul 2006 Location: terrell tx. Posts: 67	Re: PARTING: 1969 GMC 3/4 ton i'm sorry man your right I better hold off. thanks

07-26-2008, 10:12 PM	#61
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: PARTING: 1969 GMC 3/4 ton How is the grill? It looks like the pass side is bent.

07-26-2008, 11:42 PM	#62
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: PARTING: 1969 GMC 3/4 ton Pass side is bent in two spots. Fixable for a driver. $35 plus ride.

07-30-2008, 07:45 PM	#65
walker Registered User Join Date: Jul 2003 Location: north of Phx AZ about 30 miles Posts: 698	Re: PARTING: 1969 GMC 3/4 ton Do you have the visors, if so what color are they and how much? __________________ Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold

07-30-2008, 08:24 PM	#66
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: PARTING: 1969 GMC 3/4 ton How is the front light harness.Is there any splices or burnt wires. __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

07-31-2008, 06:15 PM	#68
wrangler94 Registered User Join Date: Jul 2008 Location: Washington, NC Posts: 93	Re: PARTING: 1969 GMC 3/4 ton what gears were in the rear? if it's 5.13 i'm interested.

08-12-2008, 06:40 PM	#70
be_el Registered User Join Date: Apr 2005 Location: Texas Posts: 10	Re: PARTING: 1969 GMC 3/4 ton Does the truck have power steering? If so how much for the steering gear to 77041? Thanks in advance __________________ Be_eL 1969 Chevy K/20

08-12-2008, 09:20 PM	#71
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: PARTING: 1969 GMC 3/4 ton I'm interested in headlight wiring harness too, even if it's spliced. Let me know, thanks. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all



Register or Log In To remove these advertisements.

08-12-2008, 10:33 PM	#72
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: PARTING: 1969 GMC 3/4 ton Friz, what kind of transfer case does it have? Looking for the torsion mount for a T220. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

08-12-2008, 11:24 PM	#73
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: PARTING: 1969 GMC 3/4 ton Sorry I didn't see this was bumped. I've been extremely busy the past two weeks. be_el: no PS CPNE: I'll get some pics and a price up. red71cheyenne: it's a 2wd

08-13-2008, 05:56 PM	#74
cory321 Problem Child Join Date: Sep 2005 Location: Kettering Ohio Posts: 1,248	Re: PARTING: 1969 GMC 3/4 ton I'm going to pass on the light harness. __________________ 1972 gmc sierra grande 350/350 a/c soon`to get a new 350 I Survived Norwood

08-14-2008, 07:50 AM	#75
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: PARTING: 1969 GMC 3/4 ton Der...C20. My bad. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.