EZwiring Harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yfz450_0569 · 07-31-2008, 05:23 PM

Is the EZ wiring harness a good one? Any other recomendations? Maybe also a good place to get the guages from? I'm building my own frame also and where's a good place to run the wires front to back, my dad's got some harness clips that he uses on trailers that i think look like they'd work quite well.

myoldchevytruck · 07-31-2008, 06:00 PM

I would recommend an M&H Wiring Harness. This harness seems to be the closest to the stock harness.
GMC Paul's carries this harness.

stingray72 · 07-31-2008, 06:10 PM

I did a Painless Wiring Harness on my old 70. it wasn't too bad

Ackattack · 07-31-2008, 06:51 PM

I used a painless harness on my 72 GMC. I wasn't real impressed with it. I guess it worked ok.

I ordered a EZwiring harness for my 68, but haven't installed it, so can't give an opinion of it.

yfz450_0569 · 07-31-2008, 06:54 PM

all info is greatly appreciated, i want this thing to turn out good

67dragtruck · 08-01-2008, 09:17 PM

I'm planning on using one in my new build. They look nice and much cheaper. I don't want a factory replacement. I have too many extras going in and need extra circuits, etc. I talked to them on the phone and thay seemed very nice and very helpful.

Tom

**SactoJim** · 08-02-2008, 12:38 AM

EZ worked great for me and you can't beat the price. I've never had to rewire an entire vehicle and was a little intimidated by it. Just took my time and I didn't have any problems at all.......I'd buy again.

Psycho71 · 08-02-2008, 04:08 PM

I just did my truck with an EZ kit this winter. No problems at all, and everything worked right the first time. And yeah, the price was 'unbeatable".

I used the mini 21 circuit kit, although I could have gotten away with less circuits. I ended up deleting about half of the harness.

When/if I have to rewire another vehicle, it'll be an EZ harness too.

Jay

**John Fabris** · 08-02-2008, 08:29 PM

I also used the EZ-wiring kit, 21 circuit.

I was also intimidated at first, but once I got it done, I would have no problems doing this again with the same kit.

telly · 08-02-2008, 08:52 PM

Do I get this right? Will the EZ 21 harness handle all my basic needs?

I have been looking at all the different harnesses in my "Year One" and "LMC" catalogs, and each of them show that I would need multiple harnesses to wire my truck. Please tell me I can accomplish the same with this one simple, inexpensive wiring harness.

AusMarty · 08-03-2008, 09:16 AM

I got an ezwire 14 circuit heavy duty loom, and was very dissapointed with the quality, when I questioned it "they blammed their workers", when in actual fact it is a design fault, "See Pics"
Firstly the flasher can won't go all the way in "not enough room "
secondly there is a gap between the mounting plate and the fuse block because the wires don't have enough room especially on the ignition cutout switch side, two wires are actually damaged because of this, I am going to make a taller mounting plate to overcome the problem.
If anyone has one of these in there truck I would strongly recommend you check this as I would hate for someone to have a serious mishap, "When not if "the wires short it will be direct to ground

**John Fabris** · 08-03-2008, 12:40 PM

telly, 21 circuits is more then I needed and I have powerwindows, heated seats, stereo with two amps, and I still have several wires that I did not use.

I am not sure what to say about ausmarty wire kit, but take a look at the pictures that SactoJim posted, same as my kit and I thought it was top notch!

07-31-2008, 05:23 PM	#1
yfz450_0569 Registered User Join Date: May 2008 Location: Texas Posts: 227	EZwiring Harness Is the EZ wiring harness a good one? Any other recomendations? Maybe also a good place to get the guages from? I'm building my own frame also and where's a good place to run the wires front to back, my dad's got some harness clips that he uses on trailers that i think look like they'd work quite well.

07-31-2008, 06:00 PM	#2
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: EZwiring Harness I would recommend an M&H Wiring Harness. This harness seems to be the closest to the stock harness. GMC Paul's carries this harness. __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors Last edited by myoldchevytruck; 07-31-2008 at 06:00 PM.

07-31-2008, 06:10 PM	#3
stingray72 Red Headed Step Child Join Date: Oct 2003 Location: Atlanta, GA Posts: 1,216	Re: EZwiring Harness I did a Painless Wiring Harness on my old 70. it wasn't too bad __________________ "Dinner, the perfect break between work and drunk" -Homer Simpson

07-31-2008, 06:51 PM	#4
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: EZwiring Harness I used a painless harness on my 72 GMC. I wasn't real impressed with it. I guess it worked ok. I ordered a EZwiring harness for my 68, but haven't installed it, so can't give an opinion of it. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

07-31-2008, 06:54 PM	#5
yfz450_0569 Registered User Join Date: May 2008 Location: Texas Posts: 227	Re: EZwiring Harness all info is greatly appreciated, i want this thing to turn out good

08-01-2008, 09:17 PM	#6
67dragtruck Registered User Join Date: May 2001 Location: Bethlehem, GA, USA Posts: 389	Re: EZwiring Harness I'm planning on using one in my new build. They look nice and much cheaper. I don't want a factory replacement. I have too many extras going in and need extra circuits, etc. I talked to them on the phone and thay seemed very nice and very helpful. Tom __________________ No more dragtruck for me. I'm building a new ride though. It's a '71 fleetside, 400 sbc, 700R4. Working on it now, finally. Soon to have Edelbrock Pro Flo EFI, Vintage Air, 1 piece windows, buddy buckets, etc. My new build thread: http://67-72chevytrucks.com/vboard/s...17#post2861817 Best pass with the old dragtruck: 5.32 @ 131.6 mph 1/8 mile w/ a 1.25 60' Fogger/Plate 2003 Best pass with the street 406 hydraulic roller motor w/ mild plate tuneup 5.93 @ 114 mph 1/8 mile w/ a 1.29 60' 2003 or 2004

08-02-2008, 12:38 AM	#7
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: EZwiring Harness EZ worked great for me and you can't beat the price. I've never had to rewire an entire vehicle and was a little intimidated by it. Just took my time and I didn't have any problems at all.......I'd buy again. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

08-02-2008, 04:08 PM	#8
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: EZwiring Harness I just did my truck with an EZ kit this winter. No problems at all, and everything worked right the first time. And yeah, the price was 'unbeatable". I used the mini 21 circuit kit, although I could have gotten away with less circuits. I ended up deleting about half of the harness. When/if I have to rewire another vehicle, it'll be an EZ harness too. Jay __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

08-02-2008, 08:29 PM	#9
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: EZwiring Harness I also used the EZ-wiring kit, 21 circuit. I was also intimidated at first, but once I got it done, I would have no problems doing this again with the same kit. __________________ John Fabris 67 C10 SWB

08-02-2008, 08:52 PM	#10
telly Registered User Join Date: Jun 2008 Location: Stanwood, WA, 98292 Posts: 151	Re: EZwiring Harness Do I get this right? Will the EZ 21 harness handle all my basic needs? I have been looking at all the different harnesses in my "Year One" and "LMC" catalogs, and each of them show that I would need multiple harnesses to wire my truck. Please tell me I can accomplish the same with this one simple, inexpensive wiring harness. __________________ 1970 C10 Stepside 1980 Camaro Berlinetta 1972 C20 Flatbed

08-03-2008, 09:16 AM	#11
AusMarty Registered User Join Date: Jan 2005 Location: Australia Posts: 215	Re: EZwiring Harness I got an ezwire 14 circuit heavy duty loom, and was very dissapointed with the quality, when I questioned it "they blammed their workers", when in actual fact it is a design fault, "See Pics" Firstly the flasher can won't go all the way in "not enough room " secondly there is a gap between the mounting plate and the fuse block because the wires don't have enough room especially on the ignition cutout switch side, two wires are actually damaged because of this, I am going to make a taller mounting plate to overcome the problem. If anyone has one of these in there truck I would strongly recommend you check this as I would hate for someone to have a serious mishap, "When not if "the wires short it will be direct to ground Attached Images

08-03-2008, 12:40 PM	#12
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: EZwiring Harness telly, 21 circuits is more then I needed and I have powerwindows, heated seats, stereo with two amps, and I still have several wires that I did not use. I am not sure what to say about ausmarty wire kit, but take a look at the pictures that SactoJim posted, same as my kit and I thought it was top notch! __________________ John Fabris 67 C10 SWB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.