Soldering my Radiator. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972 C-10 · 08-31-2008, 01:45 AM

I was wondering how hard it would be to solder in a fitting for my electric fan thermostat into one of the tanks in my radiator. Has anyone done this? does anyone have any Tips/Tricks for this?
Thanks.

-Corey

Longhorn Man · 08-31-2008, 01:55 AM

just take it to a rad shop, they can do it (and do it right) for 20 bucks or so.
Make sure they put it on the inlest side of the rad, and at least 6 inches from the top

08-31-2008, 01:45 AM	#1
1972 C-10 Registered User Join Date: Aug 2007 Location: Coon Rapids, MN Posts: 29	Soldering my Radiator. I was wondering how hard it would be to solder in a fitting for my electric fan thermostat into one of the tanks in my radiator. Has anyone done this? does anyone have any Tips/Tricks for this? Thanks. -Corey __________________ 1972 LWB FLEETSIDE.

08-31-2008, 01:55 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Soldering my Radiator. just take it to a rad shop, they can do it (and do it right) for 20 bucks or so. Make sure they put it on the inlest side of the rad, and at least 6 inches from the top

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.