Has anyone done an ABS brake upgrade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69 Short Fleet · 02-16-2003, 09:05 PM

Hi All; Was wondering if anyone has installed an ABS brake system or was thinking of doing it? Pics. ? Thanks Doug

Longhorn Man · 02-17-2003, 01:09 AM

Sounds like a butt load of work for something that is marginally safer.
I know ABS has saved my hide once froma small fender bender...but put it in danger at least a dozen times.

Fred T · 02-17-2003, 09:47 AM

Wouldn't that take a computer and speed sensors on all the wheels? Lots of work, and no computers on my truck!

ChevLoRay · 02-17-2003, 11:03 AM

Several years ago, I saw an ad (and maybe an article) on a "device" that attached to the master cylinder and was supposed to emulate ABS on a non-ABS vehicle brake system. I doubted the ability of the device, and I have not seen any references to it in several years.

My best guess is that it had some sort of pulsating output to limit braking and prevent wheel lock. However, I don't know how else it could do that and not cause an increase in stopping distance. The sensors on the wheels are there to tell the computer that a specific wheel has stopped/slowed in relation to the others. For that input, the computer then allows the brake to be released momentarily and therefore not lock, hopefully to prevent a skid.

I don't see an easy way to install an ABS system, short of mounting a 67-72 cab/body, on a late-model ABS chassis. In my opinion, if that is what you have as your goal (to have ABS), then you'd be bucks-up to use a late chassis. Anything less would be a monumental undertaking with a lot of unknown variables.

Again, my opinion.

69 Short Fleet · 02-17-2003, 11:04 AM

Thanks for responding Fred & Longhornmail, with the some of the extensive mods and upgrades done on this board I thought someone would of done it by now. I just think it would take a "disc brake upgrade" to the next level, however time, money, and simplicity are all factors, later Doug

sniper2321 · 02-17-2003, 03:10 PM

nascar use an abs that bolts in to the break lines i'am planing on using it on my truck since i'am using alcon 6 piston caliper from bear break they told me about the abs part from BSRproducs.com if you need more info call me at 772-286-7306

Dandeluxe · 02-17-2003, 04:07 PM

THIS IS ALL YOU NEED TOO MUCH WORK W/ ABS

*Gee_Emm* · 02-18-2003, 12:38 AM

I find ABS a pain in the ass, sure its good sometimes, but at low speeds when I need to stop on ice it don't work!

Longhorn Man · 02-19-2003, 12:29 AM

It don't stop you in loose gravel either.

69 Short Fleet · 02-19-2003, 01:23 AM

Thanks for all your input guys!! Regards Doug

02-16-2003, 09:05 PM	#1
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Has anyone done an ABS brake upgrade Hi All; Was wondering if anyone has installed an ABS brake system or was thinking of doing it? Pics. ? Thanks Doug

02-17-2003, 09:47 AM	#3
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Wouldn't that take a computer and speed sensors on all the wheels? Lots of work, and no computers on my truck! __________________ Fred There is no such thing as too much cam...just not enough engine.

02-17-2003, 11:03 AM	#4
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Several years ago, I saw an ad (and maybe an article) on a "device" that attached to the master cylinder and was supposed to emulate ABS on a non-ABS vehicle brake system. I doubted the ability of the device, and I have not seen any references to it in several years. My best guess is that it had some sort of pulsating output to limit braking and prevent wheel lock. However, I don't know how else it could do that and not cause an increase in stopping distance. The sensors on the wheels are there to tell the computer that a specific wheel has stopped/slowed in relation to the others. For that input, the computer then allows the brake to be released momentarily and therefore not lock, hopefully to prevent a skid. I don't see an easy way to install an ABS system, short of mounting a 67-72 cab/body, on a late-model ABS chassis. In my opinion, if that is what you have as your goal (to have ABS), then you'd be bucks-up to use a late chassis. Anything less would be a monumental undertaking with a lot of unknown variables. Again, my opinion. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

02-17-2003, 03:10 PM	#6
sniper2321 Registered User Join Date: May 2002 Location: S.E. Fla Posts: 185	nascar use an abs that bolts in to the break lines i'am planing on using it on my truck since i'am using alcon 6 piston caliper from bear break they told me about the abs part from BSRproducs.com if you need more info call me at 772-286-7306 Last edited by sniper2321; 02-17-2003 at 03:26 PM.

02-17-2003, 04:07 PM	#7
Dandeluxe Senior Member Join Date: Nov 2001 Location: st.louis mo. Posts: 717	disc brakes THIS IS ALL YOU NEED TOO MUCH WORK W/ ABS Attached Images __________________ 1969 cst swb 350/400 th . DANNY C . ["]FRIENDS DONT LET FRIENDS DRIVE F@RD$!! 1969 cst swb corvette hugger orange with 400 hp sbc I started out with nothing and i held on to it

02-17-2003, 01:09 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Sounds like a butt load of work for something that is marginally safer. I know ABS has saved my hide once froma small fender bender...but put it in danger at least a dozen times.

02-17-2003, 11:04 AM	#5
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Thanks for responding Fred & Longhornmail, with the some of the extensive mods and upgrades done on this board I thought someone would of done it by now. I just think it would take a "disc brake upgrade" to the next level, however time, money, and simplicity are all factors, later Doug

02-18-2003, 12:38 AM	#8
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I find ABS a pain in the ass, sure its good sometimes, but at low speeds when I need to stop on ice it don't work!

02-19-2003, 12:29 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	It don't stop you in loose gravel either.

02-19-2003, 01:23 AM	#10
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Thanks for all your input guys!! Regards Doug

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.