Bunch of parts in OH

[bmrrwolfe]

I just got another 72 and now its time to sell a whole bunch of parts. I'm not really sure what they are all worth so all prices are pretty flexible.
I also have pictures available on request, and may have more parts, just let me know what you need!

I have a set of rear stepside fender, very rough and most of the edge to mount is gone, but maybe someone could repair them? $40?- gone!
Also have the steps that the PO cut holes in to run an exhaust up the top and the front panel, not in very good shape.

Two hoods, both straight and no serious rust. $75 a piece?

Two cowl panels possibly 3, all good condition. $25 a piece?

Two behind the seat gas tanks with sending units $70 a piece?

One set of doors, with glass, and have two mismatch inside door panels with them, have rust along the bottoms $100 for the pair?

two sets of fenders, both passengers sides have issues in the front, drivers sides are good $100 for a drivers side and $40 for a passenger side?

Drivers side inner fender, small spot of rust was cut off the front (barely noticeable) $50?

12 Bolt 6 lug rearend, i really dont know anything about it $120? PENDING!

12 bolt 5 lug rearend, no gears in it, but axle shafts are there, i got it with the cover loose so i took it off and found no gears. $50?

Also have a core support, not very nice, has good rust in the right hand bottom could be repairable $15?

Pictures are available to anyone interested, just let me know!
All prices are negotiable due to not knowing what they are worth.
More parts will be coming, including a cab with title, full chassis setup. original 3 speed tranny bench seat etc.

[bmrrwolfe]

I figured i needed to add some pictures.
also i have a bench seat assembly
gauge cluster (its been hacked up by the PO) probably only worth $15?
A set of hood hinges $30?
and a glove box door $20?

The picture of the complete truck is for the hood.

[bmrrwolfe]

A couple more pictures

[49m]

A drivers door taken apart and bead blasted, has a small hole in the bottom no glass or guts $50?
any better pics and will u take any less on the drivers side fender

[mark57]

Very interested in the cab.

[bmrrwolfe]

Originally Posted by 49m

A drivers door taken apart and bead blasted, has a small hole in the bottom no glass or guts $50?
any better pics and will u take any less on the drivers side fender

This is only other picture i have, but i can get more later today.
I can take $80 on the drivers side fender.

[bmrrwolfe]

Originally Posted by mark57

Very interested in the cab.

It going to be a couple weeks before the cab is ready, but it is not in very good shape, it needs inner/outer rockers, cab corners, a patch in the floor and floor supports, i have all brand new replacement panels to do it, just didn't have the time so i got another parts truck and am using that cab.

[oldschooler]

what would shipping be for the rear without gears to 17362? Also looking for some good cross sills for under a steel bed floor lwb. Thanks, Rich

[Cyclone44]

What about the red pass (right) side fender.....How much????

[bmrrwolfe]

Originally Posted by Cyclone44

What about the red pass (right) side fender.....How much????

The red fender in the picture of the whole truck is the one im using lol.
i do have two others, but they do have issues in the front corner, and they are $40 or so?

[bmrrwolfe]

Originally Posted by oldschooler

what would shipping be for the rear without gears to 17362? Also looking for some good cross sills for under a steel bed floor lwb. Thanks, Rich

I was hoping for pick-up on everything, and im sure the shipping on the rearend would be outrageous. Also i do not have any cross sills for a bed.
I'm not sure where in PA you are located but if its close to Ohio we may be able to work something out?

[bmrrwolfe]

I need these sold so i can get going on the project!!
make me offers

[backyardkustoms]

do you want to sell the grille if so how much?

[bmrrwolfe]

I have that grille and another off a 70 they are both in good condition and i haven't decided which one i am going to use yet. if you would be interested in either let me know and i will quickly decide.
Also im not sure what they are worth..

[1969stepside]

i am intrested in the step fendors

[backyardkustoms]

eaither way works for me my truck is a 70 just let me know whats going on

[lks dcvn]

if you end up wanting to sell the 71/72 grill - I will trade you that for the 700r4 that is in my garage...

Let me know.

Thx.

[bmrrwolfe]

Backyard Customs has first dibs on the grille, and i beleive i am going to use the 71-72 grille so he may have the 69-70 grille.
Thanks

[49m]

interested in the door if you wld take 35 for it.

[bmrrwolfe]

I could give you either of the red doors for $35 but i can't get rid of the beadblasted door for that cheap.
Thanks, Joe

Originally Posted by 49m

interested in the door if you wld take 35 for it.

[woodridge]

Would you consider donating the step side fenders to the "Underhaulin Project"?
Please check this thread for more information.
Well, the computer I am using won't let me cut and paste but check the Underhaulin thread in the projects and build section of the 67-72 Message board.

[bmrrwolfe]

Originally Posted by woodridge

Would you consider donating the step side fenders to the "Underhaulin Project"?
Please check this thread for more information.
Well, the computer I am using won't let me cut and paste but check the Underhaulin thread in the projects and build section of the 67-72 Message board.

I have one guy in front of you, but he wants them shipped, and i dont have the time to go through shipping hassles right now (not to mention it would alot to ship!) but if he does not take them they can all be yours if they could be picked up

[drummin89]

selling the steering column? If so is it tilt, any pictures?
thanks!
rockfan1815@yahoo.com

[bmrrwolfe]

No i do not think its a tilt, i will send you some pictures in the morning.
Thanks Joe

[67-72crazy]

hi do you have a shortbed frame.