Engine conversion questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy4Life86 · 12-12-2008, 08:04 PM

i have a 1970 Chevy C-10 1/2 ton 2wd with a 350 and automatic trans. I am planning to pull the 350 out and put a 396 Big Block in it. What all will I need to do to make the conversion work well so the truck is relaible. I know i need a Big Block radiator, Turbo 400 tranny but after that im clueless if I need anything else. any suggestions would be appreciated. PS: im only doing the big block conversion because the 350 needs a total overhaul and the 396 is ready to go.

Longhorn Man · 12-12-2008, 08:35 PM

you looking to just shove it in there, or you looking to do it like it came with it there?

Chevy4Life86 · 12-12-2008, 08:42 PM

to shove it in as cheap as possible without having to replace stuff in afew months.

Tx Firefighter · 12-12-2008, 08:43 PM

Engine mounts, fan shroud, pulleys, brackets, and exhaust.

12-12-2008, 08:04 PM	#1
Chevy4Life86 Registered User Join Date: Feb 2008 Location: Golden Valley,ND Posts: 17	Engine conversion questions i have a 1970 Chevy C-10 1/2 ton 2wd with a 350 and automatic trans. I am planning to pull the 350 out and put a 396 Big Block in it. What all will I need to do to make the conversion work well so the truck is relaible. I know i need a Big Block radiator, Turbo 400 tranny but after that im clueless if I need anything else. any suggestions would be appreciated. PS: im only doing the big block conversion because the 350 needs a total overhaul and the 396 is ready to go. __________________ 1963 1/2 ton 2wd 350/4 Speed 1970 1/2 ton 2wd 350/Auto 1968 Dodge Charger(driver) 383 2 barrel/Auto 2.76gears 1977 Chevy Nova 4 Door 250/Auto(had 45,000 miles from new) 1966 Plymouth Fury II 4 Door Sedan 318 Poly Head/Auto. (driver) 1998 Pontiac Grand Prix 4 door 3.1V6/Auto

12-12-2008, 08:35 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Engine conversion questions you looking to just shove it in there, or you looking to do it like it came with it there?

12-12-2008, 08:42 PM	#3
Chevy4Life86 Registered User Join Date: Feb 2008 Location: Golden Valley,ND Posts: 17	Re: Engine conversion questions to shove it in as cheap as possible without having to replace stuff in afew months. __________________ 1963 1/2 ton 2wd 350/4 Speed 1970 1/2 ton 2wd 350/Auto 1968 Dodge Charger(driver) 383 2 barrel/Auto 2.76gears 1977 Chevy Nova 4 Door 250/Auto(had 45,000 miles from new) 1966 Plymouth Fury II 4 Door Sedan 318 Poly Head/Auto. (driver) 1998 Pontiac Grand Prix 4 door 3.1V6/Auto

12-12-2008, 08:43 PM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Engine conversion questions Engine mounts, fan shroud, pulleys, brackets, and exhaust. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.