Need ONE Spindle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 01-06-2009, 05:30 PM

Need one stock or drop spindle (prefer one thats no good) to use as a mock up for my Porsche Boxster Brembo calipers. I need one that I can hack up and not feel bad about. Either side is fine but needs to be for 71 or 72 disc brakes. 73-87 only if they are the same. Prefer one close to Raleigh and very cheap would be beneficial. Thanks ahead of time. -- Josh

see ten · 01-06-2009, 09:25 PM

I've got a couple sets laying around in the scrap pile. They're yours or anyone else's if you want to come get em!

71chevytruckguy · 01-07-2009, 01:09 AM

hows $20 for a stock of a '71 sound. im in kernersville nc. think that's about an hour drive from ya, was down that way for new years. chris.

STOCKISH · 01-07-2009, 08:58 AM

Sounds fine, I'll send you a PM. Thanks

STOCKISH · 01-08-2009, 11:45 AM

Still need one. Anyone close?

STOCKISH · 01-11-2009, 09:40 PM

Still looking.

STOCKISH · 01-21-2009, 11:12 AM

Come on fellas. Someone has to have a cheap stock disc braks spindle...

**t korinek** · 01-21-2009, 01:16 PM

I have a stock 72 $25 shipped
Tom

STOCKISH · 01-21-2009, 01:19 PM

I'll take it. PM sent

01-06-2009, 05:30 PM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Need ONE Spindle Need one stock or drop spindle (prefer one thats no good) to use as a mock up for my Porsche Boxster Brembo calipers. I need one that I can hack up and not feel bad about. Either side is fine but needs to be for 71 or 72 disc brakes. 73-87 only if they are the same. Prefer one close to Raleigh and very cheap would be beneficial. Thanks ahead of time. -- Josh __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-06-2009, 09:25 PM	#2
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Need ONE Spindle I've got a couple sets laying around in the scrap pile. They're yours or anyone else's if you want to come get em!

01-07-2009, 01:09 AM	#3
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Need ONE Spindle hows $20 for a stock of a '71 sound. im in kernersville nc. think that's about an hour drive from ya, was down that way for new years. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-07-2009, 08:58 AM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Need ONE Spindle Sounds fine, I'll send you a PM. Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-08-2009, 11:45 AM	#5
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Need ONE Spindle Still need one. Anyone close? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-11-2009, 09:40 PM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Need ONE Spindle Still looking. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-21-2009, 11:12 AM	#7
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Need ONE Spindle Come on fellas. Someone has to have a cheap stock disc braks spindle... __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-21-2009, 01:16 PM	#8
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: Need ONE Spindle I have a stock 72 $25 shipped Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

01-21-2009, 01:19 PM	#9
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Need ONE Spindle I'll take it. PM sent __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.