Small update on the '71 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 01-06-2009, 10:17 PM

-
I haven't posted anything on any of the trucks lately but I have been working on the '71 4x4. I had to replace the in cab tank and sending unit because it sat so long with fuel and water in it. I also had to put a kit in the carb for the same reason. I finally got the engine started. The story on that is that it was rebuilt in 1995 (I have the receipts) and the builder ran the engine long enough at that time to break in the cam and it hadn't been started since. I took the plugs out and squirted PB Blaster in all of the cylinders and let it set for a while then squirted quite a bit of motor oil in each one. Let it set for a day or so and turned it over with the plugs out until I had oil pressure on the gauge. Put a new set of plugs in it and after turning over a few times it fired up. Had a small amount of smoke and mouse nests out of the tail pipes but after burning out the PB Blaster & oil it cleared right up. It sounds really good. I am replacing the aftermarket front fenders with a nice original set I had, so I sandblasted those and a set of hood hinges today. I have a small patch to weld inside and outside on the bottom of one fender and the truck will be ready to paint. I ordered most of the parts I needed to put it together and I should be able to pick those up the first of the week. Sorry this is so long….

LockDoc

**70cst** · 01-06-2009, 10:22 PM

Looks like you are keeping busy.

OARNGESI · 01-06-2009, 10:35 PM

was the fit on the fenders bad wasnt that the truck with nice paint

**LockDoc** · 01-06-2009, 11:02 PM

Quote:

Originally Posted by 70cst

Looks like you are keeping busy.

I like it that way...

LockDoc

**LockDoc** · 01-06-2009, 11:20 PM

Quote:

Originally Posted by OARNGESI

was the fit on the fenders bad wasnt that the truck with nice paint

The truck with the nice paint was the '72 GMC. I sold it. I bought this one out of Blair, Nebraska the middle of November. Here is the thread on it.

http://67-72chevytrucks.com/vboard/s...d.php?t=314042

I wasn't really happy with the fit of the aftermarket fenders...

LockDoc

Bob 68327 · 01-06-2009, 11:40 PM

Looks Great !! Hope to see it soon !! Maybe next weekend I will give you a ring . Keep up the good work !! Bob

**LockDoc** · 01-07-2009, 12:25 AM

Quote:

Originally Posted by Bob 68327

Looks Great !! Hope to see it soon !! Maybe next weekend I will give you a ring . Keep up the good work !! Bob

Thanks Bob. I should be around next weekend if you can make it over. Give me a call.

LockDoc

chipflyer · 01-07-2009, 12:33 AM

Look'n good Leon, keep the updates coming!

Jeff

**special-K** · 01-07-2009, 08:21 AM

Quote:

Originally Posted by LockDoc

-
Sorry this is so long….

LockDoc

In other words,you swapped the tank,got it fired it up,and sandblasted the fenders.
Mines boring,I like yours better,Ramble on...

72BlckButy · 01-07-2009, 08:47 AM

Leon, that thing is coming right along. Are you going to keep the orange color that was painted on the cab when you got it?

Any word on the other '71?

**LockDoc** · 01-07-2009, 10:24 AM

Quote:

Originally Posted by 72BlckButy

Leon, that thing is coming right along. Are you going to keep the orange color that was painted on the cab when you got it?

Any word on the other '71?

Nate,

Yes, the same color will be used. It is actually '79 Corvette red (or so the PO told me). I am seriously thinking about a red/white combo paint job.

I'm not sure which other truck you mean. I guess I've looked at too many of them. If you are talking about the SWB fleet that is just down the road from me he hasn't got it uncovered yet. You need to come up and look at that one, you may be interested in it...

.. I think it would be right up your alley. I think I'll push him a little and see if I can get some pics.

LockDoc

01-06-2009, 10:17 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,774	Small update on the '71 - I haven't posted anything on any of the trucks lately but I have been working on the '71 4x4. I had to replace the in cab tank and sending unit because it sat so long with fuel and water in it. I also had to put a kit in the carb for the same reason. I finally got the engine started. The story on that is that it was rebuilt in 1995 (I have the receipts) and the builder ran the engine long enough at that time to break in the cam and it hadn't been started since. I took the plugs out and squirted PB Blaster in all of the cylinders and let it set for a while then squirted quite a bit of motor oil in each one. Let it set for a day or so and turned it over with the plugs out until I had oil pressure on the gauge. Put a new set of plugs in it and after turning over a few times it fired up. Had a small amount of smoke and mouse nests out of the tail pipes but after burning out the PB Blaster & oil it cleared right up. It sounds really good. I am replacing the aftermarket front fenders with a nice original set I had, so I sandblasted those and a set of hood hinges today. I have a small patch to weld inside and outside on the bottom of one fender and the truck will be ready to paint. I ordered most of the parts I needed to put it together and I should be able to pick those up the first of the week. Sorry this is so long…. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-06-2009, 10:22 PM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Small update on the '71 Looks like you are keeping busy. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

01-06-2009, 10:35 PM	#3
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Small update on the '71 was the fit on the fenders bad wasnt that the truck with nice paint

01-06-2009, 11:40 PM	#6
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: Small update on the '71 Looks Great !! Hope to see it soon !! Maybe next weekend I will give you a ring . Keep up the good work !! Bob __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

01-07-2009, 12:33 AM	#8
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Small update on the '71 Look'n good Leon, keep the updates coming! Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

01-07-2009, 08:47 AM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Small update on the '71 Leon, that thing is coming right along. Are you going to keep the orange color that was painted on the cab when you got it? Any word on the other '71? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.