The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-09-2009, 02:45 AM   #1
CUSTOM DELUXE
Registered User
 
CUSTOM DELUXE's Avatar
 
Join Date: Mar 2007
Location: Southern Illinois
Posts: 36
What size tire do I need?

I have a 65 swb with a rear end out of a 72, I know that the rear end is wider than oe. I have lowered the truck 3" in the front and 5" out back, I am going with 15x8's all the way around. My question is this, what is the biggest tire you would put on this setup? or should I ask what are some tire size combo's. I wouldn't mind the same size all the way around, but then again I like the fatty, skinny look as well? I was thinking 235/60/15 up front and 275/75/15 in the rear. What is your honest opinion? I appreciate and welcome any advice.

Thanks in advance,
CUSTOM DELUXE
CUSTOM DELUXE is offline   Reply With Quote
Old 01-10-2009, 02:25 PM   #2
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,031
Re: What size tire do I need?

I've never seen a 275-75-15; 275-60's.... yes. A 275 should fit fine w/the correct back-spaced wheel.

W/a 3/5 drop, a 215-75 up front on a 15x7 & a 255-70 on a 15x8 out back would look nice.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.

Last edited by SCOTI; 01-10-2009 at 02:28 PM.
SCOTI is offline   Reply With Quote
Old 01-14-2009, 01:16 PM   #3
CUSTOM DELUXE
Registered User
 
CUSTOM DELUXE's Avatar
 
Join Date: Mar 2007
Location: Southern Illinois
Posts: 36
Re: What size tire do I need?

Thanks for the help SCOTI!! 15 inch old school look must not be as cool lookin' as I thought, didn't get much response from the guys on here.....

Last edited by CUSTOM DELUXE; 01-14-2009 at 01:18 PM. Reason: MISPELLING
CUSTOM DELUXE is offline   Reply With Quote
Old 01-14-2009, 09:25 PM   #4
muddobber
muddobber
 
Join Date: Dec 2008
Location: lavaca ar
Posts: 78
Re: What size tire do I need?

i have a 72 w/ about the same stance and i run a 295-50 out back and a 255-60 up rront on 8 inch wheels only bout a 3/8 inch difference in height
muddobber is offline   Reply With Quote
Old 01-15-2009, 03:26 PM   #5
pissonNOS
senior member
 
pissonNOS's Avatar
 
Join Date: Feb 2003
Location: fort macleod alberta
Posts: 2,770
Re: What size tire do I need?

about the 235 i was going to run it on my truck but it looked very small on there almost like a car tire i would recomend a 245-60-15 instead but hey thats just me
__________________
69 GMC bagged
pissonNOS is offline   Reply With Quote
Old 01-19-2009, 10:17 AM   #6
CUSTOM DELUXE
Registered User
 
CUSTOM DELUXE's Avatar
 
Join Date: Mar 2007
Location: Southern Illinois
Posts: 36
Re: What size tire do I need?

Thanks guys, I went with 245/60 BFG Radials on all four corners. After I give it an altitude adjustment, I'll post some pics!
CUSTOM DELUXE is offline   Reply With Quote
Old 02-06-2009, 03:47 PM   #7
jholley
Registered User
 
jholley's Avatar
 
Join Date: Jul 2008
Location: TX
Posts: 737
Re: What size tire do I need?

Did you ever get any pics of your wheel and tire setup? I'm looking to buy some tires right now and was curious how yours look.
__________________
-------------------------------------------------

Jim


Garage fillers...

85 Chevy C10 Silverado LWB
07 Nissan Altima
2006 Mini Cooper S
jholley is offline   Reply With Quote
Old 02-07-2009, 12:27 AM   #8
CUSTOM DELUXE
Registered User
 
CUSTOM DELUXE's Avatar
 
Join Date: Mar 2007
Location: Southern Illinois
Posts: 36
Re: What size tire do I need?

Pictures are from my phone and not the best quaility,but finally got the pictures to my computer. This is 5" ECE coils in the rear, and 2-1/2" spindle and 1" coil in the front. Motor is ready to go in as well as tranny. Just need to round up a drive shaft. Hope you guys approve, what do ya think?




__________________
65 SWB FLEETSIDE CUSTOM CAB BBW
66 SWB FLEETSIDE - IN PIECES
67 SWB STEPSIDE- SOLD!!
72 SWB STEPSIDE- SOLD!!
03 Z71
04 TAHOE- WIFE'S
03 HD FATBOY 100TH ANNIVERSARY LUXURY BLUE PEARL

Last edited by CUSTOM DELUXE; 02-07-2009 at 12:30 AM.
CUSTOM DELUXE is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com