Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-27-2009, 07:16 PM | #51 |
Wide Eyed User
Join Date: Mar 2008
Location: Las Vegas, Nevada
Posts: 261
|
Re: 1962 Fuel Cell dimensions
Yea.. I have thought of that... probably will end up doing that, unless I find something better.
__________________
1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441 |
01-28-2009, 01:20 AM | #52 |
Senior Member
Join Date: May 2005
Location: Portales, NM
Posts: 359
|
Re: 1962 Fuel Cell dimensions
[QUOTE=DaddyMack;3109987]Here are some pics of my progression and the finished install. I still need to get a new cross member for the rear.. it will have to be custom to go across the rails at rear, unless someone knows of one ready made?
cutting away cross member I purchased a 4" x 36" channel, custom cut and fit across the back to box in the rear, good protection for the tank. I will post some pics tomorrow. looks like your rear cross member under the tailgate is off a 63-66? the bolting points are inboard of the frame rails? A cross member like what I am talking about would solve your mounting issue for that.
__________________
________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5 |
01-28-2009, 02:01 PM | #53 | |
Wide Eyed User
Join Date: Mar 2008
Location: Las Vegas, Nevada
Posts: 261
|
Re: 1962 Fuel Cell dimensions
Quote:
__________________
1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441 Last edited by DaddyMack; 01-28-2009 at 02:02 PM. |
|
01-29-2009, 01:27 AM | #54 | |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 1962 Fuel Cell dimensions
Quote:
If it was a '60-'62 rear sill these mounts would be on top of the frams rails. Not trying to be an a$$ just saying what I see. If you were to put a crossmember there as you are talking about, you could just bolt the rear sill to it like 62chevystep said also.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
01-29-2009, 01:51 AM | #55 | |
Senior Member
Join Date: May 2005
Location: Portales, NM
Posts: 359
|
Re: 1962 Fuel Cell dimensions
Quote:
Yep they should bolt here (yellow Circles)
__________________
________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5 Last edited by 62ChevyStep; 01-29-2009 at 01:55 AM. |
|
01-29-2009, 01:25 PM | #56 | ||
Wide Eyed User
Join Date: Mar 2008
Location: Las Vegas, Nevada
Posts: 261
|
Re: 1962 Fuel Cell dimensions
Quote:
Quote:
Didn't think you were...... I had no idea.. glad you caught that.. thanks!! Wonder how that happened.. but it makes sense because the holes don't quite line up I noticed. The permanent bed won't go into place for some time, so I will replace that when it comes time. Excellent! Thank you in advance for the pictures..
__________________
1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441 |
||
01-29-2009, 11:58 PM | #57 |
Senior Member
Join Date: May 2005
Location: Portales, NM
Posts: 359
|
Re: 1962 Fuel Cell dimensions
Here ya go DMack
__________________
________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5 |
01-30-2009, 12:00 AM | #58 |
Senior Member
Join Date: May 2005
Location: Portales, NM
Posts: 359
|
Re: 1962 Fuel Cell dimensions
And the some more
__________________
________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5 |
01-30-2009, 12:00 AM | #59 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: 1962 Fuel Cell dimensions
__________________
CHEVY ONLY |
01-30-2009, 12:57 PM | #60 |
Wide Eyed User
Join Date: Mar 2008
Location: Las Vegas, Nevada
Posts: 261
|
Re: 1962 Fuel Cell dimensions
perfect!! thanks... I like it. notched, welded and all the holes are intact for attaching the bed rail (new one in my case..lol).
__________________
1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441 Last edited by DaddyMack; 01-30-2009 at 12:57 PM. |
06-05-2009, 08:20 PM | #61 |
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: 1962 Fuel Cell dimensions
what do you mean by foam in your tank
heres the setup i have
__________________
Gage 1967 C10 Shortbed Stepside |
06-05-2009, 09:57 PM | #62 |
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: 1962 Fuel Cell dimensions
The cells have foam in the base to prevent fuel aeration and sloshing.
http://store.summitracing.com/partde...5&autoview=sku Here are some pics of the Fuel Cell, and how it's mounted on to the frame. http://67-72chevytrucks.com/vboard/s...d.php?t=321173
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
06-05-2009, 10:31 PM | #63 |
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: 1962 Fuel Cell dimensions
can you actually see the foam inside the tank
__________________
Gage 1967 C10 Shortbed Stepside |
06-05-2009, 10:49 PM | #64 |
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: 1962 Fuel Cell dimensions
Yep! The fuel cell is a rectangular box filled with foam to prevent the fuel from sloshing around too much. When you put gas in it you just put the gas pump nozzel right on the foam.
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
06-05-2009, 10:51 PM | #65 |
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: 1962 Fuel Cell dimensions
mine doesnt have that
did you put the foam in yours
__________________
Gage 1967 C10 Shortbed Stepside |
06-05-2009, 11:12 PM | #66 |
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: 1962 Fuel Cell dimensions
Yep it sure did. I got it from Jegs.com.
You can buy the foam to put in it. Fuel Cell Safety Foam http://www.jegs.com/webapp/wcs/store...2Bmatchpartial
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
06-06-2009, 09:48 AM | #67 |
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: 1962 Fuel Cell dimensions
how many do you have to put in there
do you have to alter your fuel lines
__________________
Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 06-06-2009 at 09:48 AM. |
06-08-2009, 12:27 AM | #68 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 1962 Fuel Cell dimensions
Just a little FYI.....I've read that some guys have had issues with the foam breaking down after a while and causing problems with plugged filters and carb problems. I don't remember if it had to do with running race fuel, or just having the foam in the cell for a couple years or so.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
06-08-2009, 11:21 AM | #69 |
Sunburst C10!!!
Join Date: Jan 2009
Location: Texas
Posts: 2,560
|
Re: 1962 Fuel Cell dimensions
thanks
i probably wouldnt need it anyway
__________________
Gage 1967 C10 Shortbed Stepside |
04-22-2012, 02:17 PM | #70 |
Registered User
Join Date: Mar 2012
Location: Jenison Michigan
Posts: 62
|
Re: 1962 Fuel Cell dimensions
when you have the rear bumper on can you see the tank at all if you look at it from behind or does it sit flush in there so you dont see any tank hanging?
|
04-23-2012, 12:03 PM | #71 |
Wide Eyed User
Join Date: Mar 2008
Location: Las Vegas, Nevada
Posts: 261
|
Re: 1962 Fuel Cell dimensions
Not really on mine. I had my tank custom made for me with my own plans I drew up. My tank is deeper in the front and shallower in the rear. Still holds 20 gallons.
__________________
1962 Chevy P/U SB Fleetside 350/350 2.5/5 static drop My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=294723 Final (as final can be ) Pics: http://67-72chevytrucks.com/vboard/s...d.php?t=393441 |
04-24-2012, 09:25 AM | #72 | |
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: 1962 Fuel Cell dimensions
Quote:
http://www.enertechlabs.com/ethanol_in_gasoline.htm I need to find out when it is need to replace the foam after years in use on these since mine came with it. I may just take it out all together to be on the safe side and save me future troubles.
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
|
04-24-2012, 09:46 AM | #73 | |
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: 1962 Fuel Cell dimensions
Quote:
Page #5 http://67-72chevytrucks.com/vboard/s...=321173&page=5
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
|
12-19-2012, 06:41 PM | #74 |
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,530
|
Re: 1962 Fuel Cell dimensions
This one would probably hang down to low.
And at only 27 inches wide, I'd feel like I'm wasting 9" of space if it could be 36 inches wide for my 65 on a 62 frame. portland.craigslist.org/clc/pts/3487760429.html Posted via Mobile Device
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|