Oh no! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Robznob11 · 01-27-2009, 10:28 PM

well i got a problem. i cut off the bottom door pillar to replace it and the little door backer plate fell out no biggie. any how i got tied up doing something else and left it for the day , the next day while in the garage i noticed my 3 year old playing with the plate so i took it and put it on the shelf. well that after noon i thought about it and decided i should tack it back in before it got lost and guess what its no where to be found. so if any one has one or can get one i would gladly pay for it. right now im to a point where i need to bolt the door on so that i can line up the rocker and install it

thirdstreettito · 01-27-2009, 11:49 PM

Dont know if it is a repro'ed part. When you get it you will find the other one. It always happens!

pumpgas · 01-27-2009, 11:57 PM

Don't you just love when you put something somewhere it won't get lost then bam it's lost anyways.

Kayotic · 01-28-2009, 12:08 AM

You talking about the plate on the hinge side? (because I don't remember if there is a plate on the striker). Upper lower are they the same?

**rob32472** · 01-28-2009, 07:06 AM

post a pic of what u need if possible i most likely have one if u will pay for the ride u can have it

Richard H. · 01-28-2009, 08:16 AM

In a pinch I guess you could get a piece of 12 ga; or better to make a plate ,drill and weld nuts behind it.

Richard H. · 01-28-2009, 10:58 AM

Quote:

Originally Posted by Richard H.

In a pinch I guess you could get a piece of 12 ga; or better to make a plate ,drill and weld nuts behind it.

In the picture i tried to make an arrow to show a slot I made in the piller with a cut off wheel that I welded a strip of sheet metal to the plate to hold it loose but in place till my door is aligned and then I will weld the tab in place.

Robznob11 · 01-28-2009, 11:49 PM

I don't have a problem welding one in , i already done the other side but i have to have one to weld in there. it is the drivers side lower door hinge plate

Kayotic · 01-29-2009, 02:54 PM

Got one - Threads are good.

01-27-2009, 10:28 PM	#1
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Oh no! well i got a problem. i cut off the bottom door pillar to replace it and the little door backer plate fell out no biggie. any how i got tied up doing something else and left it for the day , the next day while in the garage i noticed my 3 year old playing with the plate so i took it and put it on the shelf. well that after noon i thought about it and decided i should tack it back in before it got lost and guess what its no where to be found. so if any one has one or can get one i would gladly pay for it. right now im to a point where i need to bolt the door on so that i can line up the rocker and install it __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

01-27-2009, 11:49 PM	#2
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Oh no! Dont know if it is a repro'ed part. When you get it you will find the other one. It always happens! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

01-27-2009, 11:57 PM	#3
pumpgas Registered User Join Date: Dec 2008 Location: indiana Posts: 304	Re: Oh no! Don't you just love when you put something somewhere it won't get lost then bam it's lost anyways. __________________ 00' Z28 ("wifes" car) 92' Mustang w/sbc everything needs a little heart beat 87' GMC Sierra Classic Short Bed Fleet side almost stock 69' Chevy short step carbed 6.0 w/400th trans. Completed w/325 miles on it

01-28-2009, 12:08 AM	#4
Kayotic Registered User Join Date: Mar 2008 Location: Lawrenceville, Ga Posts: 300	Re: Oh no! You talking about the plate on the hinge side? (because I don't remember if there is a plate on the striker). Upper lower are they the same? __________________ Atlanta Craigslist Hurst Indy Pickup Truck 3-Speed Shifter - 5010016

01-28-2009, 07:06 AM	#5
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: Oh no! post a pic of what u need if possible i most likely have one if u will pay for the ride u can have it

01-28-2009, 08:16 AM	#6
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Re: Oh no! In a pinch I guess you could get a piece of 12 ga; or better to make a plate ,drill and weld nuts behind it. __________________ The ole 350 budget build.

01-28-2009, 11:49 PM	#8
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Oh no! I don't have a problem welding one in , i already done the other side but i have to have one to weld in there. it is the drivers side lower door hinge plate __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

01-29-2009, 02:54 PM	#9
Kayotic Registered User Join Date: Mar 2008 Location: Lawrenceville, Ga Posts: 300	Re: Oh no! Got one - Threads are good. __________________ Atlanta Craigslist Hurst Indy Pickup Truck 3-Speed Shifter - 5010016

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.