What fittings do you use? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

p8ntballer1911 · 01-29-2009, 09:56 AM

I have some brass compression fitting I am using now but i really don't like them very much. I feel the quick disconnects are safer. My brother has the quick disconnects and I am leaning more toward those. What is everyone else running?

smashingchuck · 01-29-2009, 02:17 PM

Nothing quick about what I'm running.. JIC fittings.

**lolife99** · 01-29-2009, 03:25 PM

I like brass DOT fittings. Usually Parker fittings.
Look at your local Fastenal Store. They ordered mine and had them in in 2 days. They also stock the black "plastic looking" fittings,... but I don't think they are DOT.

*Shane* · 01-29-2009, 04:59 PM

DOT approved Push-to-Connect stainless fittings from Parker Hannifin

ulakovic22 · 01-29-2009, 06:42 PM

Brass DOT PTC fittings.

edflores · 01-29-2009, 08:59 PM

depends. dot ptc brass for the daily and anythin i run under 200psi.
compression fittings for the hopper (~400psi). i feel safer with those, and my local fitting place doesnt carry anything over 1/2 for ptc. i also run hydro hose before the valve.

chevydog66 · 01-29-2009, 10:34 PM

All brass sealed up with white pipe cement. I got mine from a local big rig supply shop, or NAPA.

Twisted Minis · 01-29-2009, 11:08 PM

I like Nickel Plated ASCO Push To Connect fittings. Otherwise I like to run hardline with a 37 degree flare or double flare fittings and aluminum or stainless line.

baggedcten · 01-31-2009, 01:44 AM

i have both on my truck ptc and compression was using all ptc but redid my rear setup and the only thing that i found near by were compression fittings.

01-29-2009, 09:56 AM	#1
p8ntballer1911 Bodydropped71 Join Date: Jun 2008 Location: Conroe Texas Posts: 264	What fittings do you use? I have some brass compression fitting I am using now but i really don't like them very much. I feel the quick disconnects are safer. My brother has the quick disconnects and I am leaning more toward those. What is everyone else running?

01-29-2009, 02:17 PM	#2
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: What fittings do you use? Nothing quick about what I'm running.. JIC fittings. __________________ 78 Build Thread 4Runner Build

01-29-2009, 03:25 PM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: What fittings do you use? I like brass DOT fittings. Usually Parker fittings. Look at your local Fastenal Store. They ordered mine and had them in in 2 days. They also stock the black "plastic looking" fittings,... but I don't think they are DOT. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-29-2009, 04:59 PM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: What fittings do you use? DOT approved Push-to-Connect stainless fittings from Parker Hannifin

01-29-2009, 06:42 PM	#5
ulakovic22 Registered User Join Date: Aug 2008 Location: Lantana, TX Posts: 419	Re: What fittings do you use? Brass DOT PTC fittings.

01-29-2009, 08:59 PM	#6
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: What fittings do you use? depends. dot ptc brass for the daily and anythin i run under 200psi. compression fittings for the hopper (~400psi). i feel safer with those, and my local fitting place doesnt carry anything over 1/2 for ptc. i also run hydro hose before the valve.

01-29-2009, 10:34 PM	#7
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: What fittings do you use? All brass sealed up with white pipe cement. I got mine from a local big rig supply shop, or NAPA. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

01-29-2009, 11:08 PM	#8
Twisted Minis Registered User Join Date: Nov 2008 Location: Windsor, CA Posts: 500	Re: What fittings do you use? I like Nickel Plated ASCO Push To Connect fittings. Otherwise I like to run hardline with a 37 degree flare or double flare fittings and aluminum or stainless line. __________________ If you can find it cheaper, I can fix it!

01-31-2009, 01:44 AM	#9
baggedcten 86 C10 Join Date: Sep 2007 Location: Ga. Posts: 416	Re: What fittings do you use? i have both on my truck ptc and compression was using all ptc but redid my rear setup and the only thing that i found near by were compression fittings. __________________ 1986 C10 2001 chevy silverado purchased 8-29-09 sold 2004 silverado purchased 8-27-10 sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.