Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-06-2003, 02:01 PM | #1 |
Senior Member
Join Date: Jul 2002
Location: Champaign, IL
Posts: 1,397
|
Anyone own a stud welder? Questions?
Does anyone here own a stud welder for dent pulling? I'm looking for advice before I purchase one.
What brands are good? What tools should I get with it? Other pro's and cons? Any help would be appreciated. Thanks!
__________________
Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com |
03-06-2003, 02:53 PM | #2 |
Progress = 0%
Join Date: Nov 2001
Location: Kansas City, MO
Posts: 2,108
|
I have the one that Eastwood sells, but can't think if the brand name. Mine is blue and I think they sell a red one too, but I'm not sure what the difference is. It came with a bag of pins (studs) and slide hammer. I haven't used it too much but seems to work pretty good. Sometimes the pins will pop off as you are pulling on them on larger dents, which can be frustrating. It seems to be great for small dents though.
__________________
Jason - '67 GMC swb | '57 Bel-Air 4dr hardtop | '56 210 4dr Wagon | 2000 GMC Sierra |
03-06-2003, 03:36 PM | #3 |
Registered User
Join Date: Jan 2000
Location: Bothell, WA
Posts: 548
|
Spitznagel is the most well known name for this tool. Check out this one. Heck of a buy. Good luck.
Larry http://cgi.ebay.com/ws/eBayISAPI.dll...category=11704 |
03-06-2003, 04:26 PM | #4 |
Registered User
Join Date: Jan 2000
Location: Bothell, WA
Posts: 548
|
Heres one more. Would work great for home use.
Larry http://cgi.ebay.com/ebaymotors/ws/eB...tem=2405651605 |
03-06-2003, 07:59 PM | #5 |
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
I've got the blue one the Eastwood company sells. Its made by Motor Guard Corp. I believe. I've used mine quite a lot and had pretty good luck with it. Works good for pulling dents in places where you can't get to the backside of the sheetmetal. I've used it where I could get to the backside. I gave about $225 for it if I remember correctly. However the latest Eastwood catalogs I've gotten have it for just over $200. I just got the slide hammer. I made a clamping device out of angle iron to pull multiple pins, and I didn't get the shrink tip though that could come in handy.
__________________
|
03-06-2003, 10:12 PM | #6 |
Registered User
Join Date: Mar 2001
Location: Paradise TX USA
Posts: 1,200
|
I've got one that I bought from Matco Tools. It's supposed to be their top of the line unit complete with slide hammer and shrinking tip.
I used it a little till I figured out what a lousy body man I am and gave up. I've been thinking about selling it, since I probably won't be using it much anymore if anybody is interested. What's a fair price?
__________________
"Negative people always seem to have a problem for every solution" |
03-06-2003, 10:43 PM | #7 |
Registered User
Join Date: Dec 1999
Location: Santee Ca
Posts: 251
|
I have been using mine for about 15 years now. I bought it from Matco tools. I believe it payed for it self by now.
|
03-06-2003, 11:44 PM | #8 |
Registered User
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,488
|
I can't even begin to guess how much I've used my stud welder. I've had it about 10 years. A very useful tool.
Two accessories I would recommend are the T handle, great for hammer work, and the multi pin puller, very good for large creased areas and for pulling on the frame machine. I am planning a dent pulling video and will cover stud welding techniques. |
03-07-2003, 12:16 AM | #9 |
Senior Member
Join Date: Jul 2002
Location: Champaign, IL
Posts: 1,397
|
Thanks for the info, everyone. It sure seems like it would pay for itself.
Eddie H....I p.m.'ed you if you're interested in selling it. Is Matco stuff expensive? ebfabman...I'd buy that video from you as well as some of the others when they are ready! Thanks guys!
__________________
Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|