trying to clean out bit before summer hits - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969stepside · 02-18-2009, 11:24 PM

what shap are the white 72 door panals in how is the grain? shipped to 37601 i also need a good set of sun visors light brown if you have them and do you have any 3/4 ton sway bars with brackets? all shipped to 37601

teeitup · 02-19-2009, 08:23 PM

1sik7t2, Dave, sorry no clips. I'm not sure I have a orange glove box door, I'll look Fri after work
themeskin, its going out Fri USPS
Perry, sorry the one I have is not the right one
1969stepside, I'll go out an look at them better and get with you. Sorry no visors, all have been sold. Also sorry no sway bars right now
Thanks Randy

Prathbun · 02-19-2009, 08:28 PM

Randy,

Do you have the backing plates (2) for the door mirrors? This is for the triangle mount plate that goes on the inside of the door with 3 screw holes (hopefully not stripped). If you don't have these, do you have any RV mirror parts?

Thanks again!!

kingp411 · 02-19-2009, 08:42 PM

hey there teeitup, looking to see if you still have a good set of black visors, any black vents for a non a/c cab, and i'm looking for a set of bench seat brackets, the p/o was tall and removed them and bolted the seat to the floor. thanks! oh ya, shipping to 89031

teeitup · 02-19-2009, 08:57 PM

Perry, sorry no backing plates. I have some mirrors out there not sure what all I do have, I'll get a pic of what I have Fri after work
king411, sorry no visors or vents. i think I have one set of seat brackets left but I won't be able to check until Fri after work. If so $15 plus shipping for them. I'll let you know tomorrow night.
Thanks Randy

weircc · 02-19-2009, 11:37 PM

got my parts today wanna say thanks

kingp411 · 02-20-2009, 12:02 AM

thanks tee, if you do have those, i'll take them, just let me know

Skirkpat · 02-20-2009, 11:06 AM

Hi Randy, Do you have any turbo 350/400's, or 700r/200r that run, or a good core? Thanks again for your help.
Sean

*b-rad* · 02-20-2009, 01:30 PM

Randy do u have any ash trays left and also heater wiring harness

teeitup · 02-20-2009, 01:55 PM

weircc, glad they got there OK, THANKS
kingp411, I'll check tonight
Skirkpat, Sean, sorry none right now
b-rad, I got quite a few ash trays left, what year you needing one for $12 shipped each
Thanks Randy

*b-rad* · 02-20-2009, 06:29 PM

randy its a 71

also do u have a heater wiring harness i will send u a pm with my info

powell72 · 02-20-2009, 06:49 PM

Randy, seatbelt showed up today, thanks again.

teeitup · 02-20-2009, 09:29 PM

1sik7t2, Dave, sorry no orange ones
b-rad, Pm'd you back
Chris, glad it got there OK, Thanks so much, Randy

themeskin · 02-22-2009, 08:35 PM

hi randy do u have a really good set of seat belts / visors black or dark blue and the cable that goes under the bench seat thanks

themeskin · 02-23-2009, 08:21 PM

hi randy got the overflow tank thank u good tank

teeitup · 02-23-2009, 08:32 PM

Glad the tank got there OK. Sorry sold all my visors. I have a set of blue outer male seat belts but no inner female ones. Thanks Randy

67mater · 02-24-2009, 02:50 AM

Randy got a nice pair of doors? 67-72, just want rust free. Would drive out and pic em up

teeitup · 02-24-2009, 09:21 AM

Sorry no good doors right now. Thanks Randy

scoyote · 02-24-2009, 10:57 AM

How about tach dashes?
Any left and if so, how much are you asking?

Jetmech727 · 02-24-2009, 11:38 PM

I need sb engine mount towers (mounts) price shipping to 46143

teeitup · 02-24-2009, 11:59 PM

Everyone I started a new thread please look at what is left in that thread.
Sorry no tachs and no engine stands right now.
Thanks Randy

westofb · 02-25-2009, 03:07 AM

how many cabs you got for sale? what kind of shape are they in rust wise? I am building a 69, has bad rust in cowl area, needing a better starting place, do not mind floor rust, but cowl looks a little too hard to repair.

lil blue · 02-25-2009, 09:43 PM

Quote:

Originally Posted by teeitup

lllllllll
21 gauge setups $20 each plus shipping
grill on left SOLD
door SOLD

do u have one with choke and no tach
and how much is shipping to 32812

FlounderGDI · 03-22-2010, 01:19 PM

Hey,

I know this thread is a little old but I was wondering if you had a cigarette lighter. I'm looking for one that matches the stock light and windshield wiper knobs. I'm just looking for the knob. I already have the bezel and the in dash stuff.

Thanks

teeitup · 03-22-2010, 08:07 PM

Flounder, I have some out there. $12 shipped for just the lighter. Thanks Randy

02-18-2009, 11:24 PM	#226
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,208	Re: trying to clean out bit before summer hits what shap are the white 72 door panals in how is the grain? shipped to 37601 i also need a good set of sun visors light brown if you have them and do you have any 3/4 ton sway bars with brackets? all shipped to 37601 __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

02-19-2009, 08:23 PM	#227
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits 1sik7t2, Dave, sorry no clips. I'm not sure I have a orange glove box door, I'll look Fri after work themeskin, its going out Fri USPS Perry, sorry the one I have is not the right one 1969stepside, I'll go out an look at them better and get with you. Sorry no visors, all have been sold. Also sorry no sway bars right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2009, 08:28 PM	#228
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: trying to clean out bit before summer hits Randy, Do you have the backing plates (2) for the door mirrors? This is for the triangle mount plate that goes on the inside of the door with 3 screw holes (hopefully not stripped). If you don't have these, do you have any RV mirror parts? Thanks again!! __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

02-19-2009, 08:42 PM	#229
kingp411 Registered User Join Date: Jun 2008 Location: las vegas, nevada Posts: 19	Re: trying to clean out bit before summer hits hey there teeitup, looking to see if you still have a good set of black visors, any black vents for a non a/c cab, and i'm looking for a set of bench seat brackets, the p/o was tall and removed them and bolted the seat to the floor. thanks! oh ya, shipping to 89031 __________________ 1971/67 c10 short bed-cleaning up now-sold 1970 chevelle-put on hold to play with new truck 1968 nova-tube chassis drag car 2006 1500hd-gets me to work 2005 honda pilot-wifes baby hauler

02-19-2009, 08:57 PM	#230
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits Perry, sorry no backing plates. I have some mirrors out there not sure what all I do have, I'll get a pic of what I have Fri after work king411, sorry no visors or vents. i think I have one set of seat brackets left but I won't be able to check until Fri after work. If so $15 plus shipping for them. I'll let you know tomorrow night. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2009, 11:37 PM	#231
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: trying to clean out bit before summer hits got my parts today wanna say thanks

02-20-2009, 12:02 AM	#232
kingp411 Registered User Join Date: Jun 2008 Location: las vegas, nevada Posts: 19	Re: trying to clean out bit before summer hits thanks tee, if you do have those, i'll take them, just let me know __________________ 1971/67 c10 short bed-cleaning up now-sold 1970 chevelle-put on hold to play with new truck 1968 nova-tube chassis drag car 2006 1500hd-gets me to work 2005 honda pilot-wifes baby hauler

02-20-2009, 11:06 AM	#233
Skirkpat Registered User Join Date: Dec 2008 Location: K.C. Missouri Posts: 1,024	Re: trying to clean out bit before summer hits Hi Randy, Do you have any turbo 350/400's, or 700r/200r that run, or a good core? Thanks again for your help. Sean

02-20-2009, 01:30 PM	#234
b-rad Account Suspended Join Date: Nov 2007 Location: FT STEWART GA Posts: 509	Re: trying to clean out bit before summer hits Randy do u have any ash trays left and also heater wiring harness

02-20-2009, 01:55 PM	#235
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits weircc, glad they got there OK, THANKS kingp411, I'll check tonight Skirkpat, Sean, sorry none right now b-rad, I got quite a few ash trays left, what year you needing one for $12 shipped each Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2009, 06:29 PM	#236
b-rad Account Suspended Join Date: Nov 2007 Location: FT STEWART GA Posts: 509	Re: trying to clean out bit before summer hits randy its a 71 also do u have a heater wiring harness i will send u a pm with my info

02-20-2009, 06:49 PM	#237
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: trying to clean out bit before summer hits Randy, seatbelt showed up today, thanks again. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-20-2009, 09:29 PM	#238
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits 1sik7t2, Dave, sorry no orange ones b-rad, Pm'd you back Chris, glad it got there OK, Thanks so much, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-22-2009, 08:35 PM	#239
themeskin Registered User Join Date: Feb 2009 Location: el paso tx Posts: 125	Re: trying to clean out bit before summer hits hi randy do u have a really good set of seat belts / visors black or dark blue and the cable that goes under the bench seat thanks

02-23-2009, 08:21 PM	#240
themeskin Registered User Join Date: Feb 2009 Location: el paso tx Posts: 125	Re: trying to clean out bit before summer hits hi randy got the overflow tank thank u good tank



Register or Log In To remove these advertisements.

02-23-2009, 08:32 PM	#241
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits Glad the tank got there OK. Sorry sold all my visors. I have a set of blue outer male seat belts but no inner female ones. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-24-2009, 02:50 AM	#242
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: trying to clean out bit before summer hits Randy got a nice pair of doors? 67-72, just want rust free. Would drive out and pic em up __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

02-24-2009, 09:21 AM	#243
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits Sorry no good doors right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-24-2009, 10:57 AM	#244
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: trying to clean out bit before summer hits How about tach dashes? Any left and if so, how much are you asking? __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

02-24-2009, 11:38 PM	#245
Jetmech727 Registered User Join Date: Sep 2004 Location: Indianapolis,IN Posts: 148	Re: trying to clean out bit before summer hits I need sb engine mount towers (mounts) price shipping to 46143 __________________ "When cows laugh, does milk come out of their nose?"

02-24-2009, 11:59 PM	#246
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits Everyone I started a new thread please look at what is left in that thread. Sorry no tachs and no engine stands right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-25-2009, 03:07 AM	#247
westofb I really hate wet sanding! Join Date: Dec 2008 Location: Brookfield, MO Posts: 601	Re: trying to clean out bit before summer hits how many cabs you got for sale? what kind of shape are they in rust wise? I am building a 69, has bad rust in cowl area, needing a better starting place, do not mind floor rust, but cowl looks a little too hard to repair.

03-22-2010, 01:19 PM	#249
FlounderGDI Registered User Join Date: Sep 2009 Location: Lafayette, Indiana Posts: 339	Re: trying to clean out bit before summer hits Hey, I know this thread is a little old but I was wondering if you had a cigarette lighter. I'm looking for one that matches the stock light and windshield wiper knobs. I'm just looking for the knob. I already have the bezel and the in dash stuff. Thanks __________________ 1969 CST/10 "GreenAndWhite" 1974 Nova (SOLD... End of an Era) 2000 Impala (RIP) 2008 Malibu Brand Loyal... I've never owned a Vehicle not made by Chevrolet.

03-22-2010, 08:07 PM	#250
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits Flounder, I have some out there. $12 shipped for just the lighter. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.