|
02-25-2009, 03:11 PM
|
#1 |
|
Account Suspended
Join Date: Mar 2007
Location: san bernardino ca. everywhere
Posts: 3,938
|
seat belt bolt ?
im going to be installing seat belts in my truck, and need to know what size and thread pitch the seat belt bolts are on a 67-72 chevy pickup, so i can go buy some bolts from the hardware store?
any help would be very appreciated. |
|
|
|
02-25-2009, 03:27 PM
|
#2 |
|
Restoring it $200 at a time...
Join Date: Aug 2008
Location: NE Kansas
Posts: 886
|
Re: seat belt bolt ?
7/16-14 is the thread for the shoulder harness; I'd guess the stuff on the floor is the same. I made my own mounts down low; IIRC I used 1/2-13. Everything is Grade 8.
__________________
Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0 |
|
|
|
|
02-25-2009, 04:03 PM
|
#3 |
|
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: seat belt bolt ?
The bolts on the floor are a good bit bigger then the shoulder harness bolts. Not sure on the size though.
__________________
Beat it to fit, Paint it to match... 
|
|
|
|
|
02-25-2009, 04:07 PM
|
#4 |
|
Account Suspended
Join Date: Mar 2007
Location: san bernardino ca. everywhere
Posts: 3,938
|
Re: seat belt bolt ?
would a hardware store carry grade 8 bolts
|
|
|
|
|
02-25-2009, 04:16 PM
|
#5 |
|
Rods
 Join Date: Nov 2002
Location: Bryan, TX
Posts: 1,398
|
Re: seat belt bolt ?
Should. Home depot does
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
