WTB Clutch Fork/Shifter Boot & Ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

My72BB · 02-28-2009, 09:47 AM

Converting from Auto to 4 Speed and need a few final parts.

Working on 72 and need:

1. Cast iron clutch fork
2. 4 speed shift boot (angled in the front)
3. Metal ring for boot (angled in the front)

I have heard that all the parts for Big Block and Small block are the same...Anybody want to chime in.

Thanks, Alan

pickupman · 02-28-2009, 07:22 PM

I should have these parts, I will try and check for you tomorrow. Bill

My72BB · 02-28-2009, 07:51 PM

Sounds good...thx

pickupman · 03-03-2009, 08:50 PM

Sorry I did not have any of them. I think Special-K ended up wirth the boots and rings. Chevck With him. I do have a new boot for $22 if needed.

Tynee · 03-05-2009, 01:02 PM

My72BB, check with your local GMC Heavy Truck dealer on the cast iron clutch fork. When I needed the retainer clip that holds mine in place, none of hte chevy dealers, or parts houses in town had them, but the GMC/Volvo dealer did.

Also, it appears they can be had from LMC.:

http://www.lmctruck.com/ICATALOG/CB/full.aspx?Page=136

02-28-2009, 09:47 AM	#1
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	WTB Clutch Fork/Shifter Boot & Ring Converting from Auto to 4 Speed and need a few final parts. Working on 72 and need: 1. Cast iron clutch fork 2. 4 speed shift boot (angled in the front) 3. Metal ring for boot (angled in the front) I have heard that all the parts for Big Block and Small block are the same...Anybody want to chime in. Thanks, Alan

02-28-2009, 07:22 PM	#2
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: WTB Clutch Fork/Shifter Boot & Ring I should have these parts, I will try and check for you tomorrow. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

02-28-2009, 07:51 PM	#3
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: WTB Clutch Fork/Shifter Boot & Ring Sounds good...thx

03-03-2009, 08:50 PM	#4
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: WTB Clutch Fork/Shifter Boot & Ring Sorry I did not have any of them. I think Special-K ended up wirth the boots and rings. Chevck With him. I do have a new boot for $22 if needed. __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-05-2009, 01:02 PM	#5
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: WTB Clutch Fork/Shifter Boot & Ring My72BB, check with your local GMC Heavy Truck dealer on the cast iron clutch fork. When I needed the retainer clip that holds mine in place, none of hte chevy dealers, or parts houses in town had them, but the GMC/Volvo dealer did. Also, it appears they can be had from LMC.: http://www.lmctruck.com/ICATALOG/CB/full.aspx?Page=136 __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.