72 lwb parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GRUMPYONE · 03-04-2009, 01:09 AM

I got a 72 lwb air/was big block. Cab is rusted but the glove box still has the option sticker on it. Dash is in good shape except someone cut the radio hole and folded the taps back not a big deal to fix. All the brakes are still working and holding fluid. I will part it out, sell, or trade. I need a radio for my 67(doesn't have to work just nice to put back in the fac hole), buckets whatcha got.
I would like to get 500.00 for all of it, but will trade its in the way.

**Classic Bowties** · 03-04-2009, 03:02 AM

Any of the original a/c compressor mounting brackets around yet?

chuckmc8 · 03-04-2009, 07:13 AM

I can use the brake booster\ master cyl setup and have nice am radio to trade

**too much stuff** · 03-04-2009, 09:24 AM

Engine mounts? Power steering set-up? What series is it? (c-10, custom 20, cheyenne?) Pics? Woodgrain glovebox door? Stainless hubcaps?

71MUTT · 03-04-2009, 09:51 AM

I'm looking for a set of black seat belts.

**JQ-72** · 03-04-2009, 05:54 PM

I've got some 69-70 bucket seats I might trade. Also wondering condition of truck - is it complete minus motor, trans? Custom or Cheyenne? Any other options? Thanks.
Joshua

GRUMPYONE · 03-04-2009, 07:13 PM

CLASSIC BOWTIES- There are no ac brackets on the truck. when they removed the motor they took them.

CHUCKMC8- If u can use the brake booster and master cyl i could trade. Radio doent haft to work just nice with nobs. lmk

TOOMUCHSTUFF- The emblems say cheyenne10 and the motor mounts are told to me to be the big block(not sure). Power steering still hooked up lying in the motor bay, not wood grain dash, and no hub caps. It has ralleys on it.

71MUTT- Seat belts are brown gm.

JQ-72- It is complete minus motor and trans. The seat is gone and is realy rough. I do have enough stuff to make a good front clip, but the cab is rusted bad around the bottom. I got it for the five lug and brake conversion, my 67 has already been done so dont need it.

I will try to get some pics up thursday or friday.
thanks

EdCoop · 03-04-2009, 08:10 PM

I am interested in the rear end, if its for the coil spring suspension. How much are you asking for just the rear end?

royo · 03-04-2009, 08:15 PM

Quote:

Originally Posted by GRUMPYONE

I got a 72 lwb air/was big block. Cab is rusted but the glove box still has the option sticker on it. Dash is in good shape except someone cut the radio hole and folded the taps back not a big deal to fix. All the brakes are still working and holding fluid. I will part it out, sell, or trade. I need a radio for my 67(doesn't have to work just nice to put back in the fac hole), buckets whatcha got.
I would like to get 500.00 for all of it, but will trade its in the way.

pics please pics pics

**too much stuff** · 03-04-2009, 08:21 PM

Can you give me a price on the engine mounts and power steering setup with what ever brackets are there? Also any emblems that are in good shape? Does it have a toolbox door in the bedside? Thanks, Eric
Pics will help to verify.

**thelonerife** · 03-04-2009, 08:25 PM

I would like to get in line on the ps stuff. I may be coming to Chatanooga this weekend also.

GRUMPYONE · 03-04-2009, 09:50 PM

Holding on the master cly and booster pending trade for radio to CHUCKMC8

EDCOOP- rear end is coil spring rear 100.00 u help pull out

TOOMUCHSTUFF- Engine mounts, Powersteering set up(u help pull pump,lines, and box with pitman arm) all emblems on truck u want, 250.00 not toolbox on bed sorry.

THELONERLIFE- Same deal as TOOMUCHSTUFF - 50.00 for mounts pending if he does not want.

EdCoop · 03-04-2009, 10:05 PM

Sounds good for the rear end. I'll shoot you a PM about coming down and helping pull that out.

chuckmc8 · 03-04-2009, 10:12 PM

I'll send a PM regarding the brake booster

GRUMPYONE · 03-04-2009, 10:56 PM

Ok

CHUCKMC- Booster and master cyl will trade

EDCOOP- Rear end yours pending details of pickup

All others let me know if price is high let me know(trust me i know how hard times are, want to make friends not enemys). Will pull off parts and ship from my zip code 37379. You figure out shipping and let me know what you want and what you need or what u got you dont need. Will get pics up tomorrow.
I also would like the fac side emblems for my 67(fender) and still would like to get some buckets. Got some out of a 89-90 with console but you guys ruined that with all the 67-72 bucket pics thanks lol

**too much stuff** · 03-05-2009, 12:33 AM

Well, i can't be any help pulling parts. Definatly interested in the motor mounts. Which fender emblems are you looking for? 10 series? I should have a nice pair of those. Would like to see some pics before i commit. I also wouldn't need the steering box and pitman. Just the pump, brackets and remote reservoir. I assume that is the style it is? Thanks.

GRUMPYONE · 03-05-2009, 05:31 AM

Quote:

Originally Posted by too much stuff

Well, i can't be any help pulling parts. Definatly interested in the motor mounts. Which fender emblems are you looking for? 10 series? I should have a nice pair of those. Would like to see some pics before i commit. I also wouldn't need the steering box and pitman. Just the pump, brackets and remote reservoir. I assume that is the style it is? Thanks.

No the steering pump is not remote, dang cant catch a break guess they stole that too. I am just asking for help too pull off some of the bigger things, but no problem i can pull off enything on the truck if anybody needs me to do that. I will take pics to day and post tonight. The emblems i want is the 10 series and have the bowtie above it.

GRUMPYONE · 03-05-2009, 09:14 PM

Here are some pics of what i got.

[IMG]

[/IMG] [IMG]

[/IMG] IMG]

[/IMG] [IMG]

[/IMG]

GRUMPYONE · 03-05-2009, 09:22 PM

more

[IMG]

[/IMG] [IMG]

[/IMG]

The buckets are out of a mid 90 chevy and are in good condition with no tears with the console. Just not the right bucket for me. Let me know what u need. The rear end is sold to EDCOOP(ALSO PENDING SALE TO HIM ON THE FRONT suspension), and the mastercyl and booster is sold to CHUCKMC8. The yellow fenders are in great shape and the hood on the truck look good to(no if little surface rust). The ac panel has a broken piece at the back that slides the air control no big deal. The truck ralleys are 15x7 i have five of them. I can take anything off wires, dash, what ever you want let me know i need other parts for my truck.

**thelonerife** · 03-05-2009, 09:42 PM

how much for the bucket seats only? I'll pass on the ps stuff.

by looking at the door panels and motor stands I think the truck is a 71

GRUMPYONE · 03-05-2009, 10:20 PM

Quote:

Originally Posted by thelonerife

how much for the bucket seats only? I'll pass on the ps stuff.

by looking at the door panels and motor stands I think the truck is a 71

I would take 50.00 for seats and console

**thelonerife** · 03-06-2009, 02:04 AM

Okay let me see if The board member that i'm going to meet in Chatanooga is good for this weekend.

GRUMPYONE · 03-06-2009, 05:41 AM

Quote:

Originally Posted by thelonerife

Okay let me see if The board member that i'm going to meet in Chatanooga is good for this weekend.

k let me know i am out of town all day sunday in cartisville ga. Lmk

**thelonerife** · 03-07-2009, 02:46 AM

no word yet so i guess i'll pay for them and plan a road trip later . pm me your paypal or address for m/o

GRUMPYONE · 03-09-2009, 08:50 PM

Front suspension and rear end gone.
master cyl/booster gone.

front fenders(yellow in pics) 40.00 each
whole complete front end in pics(core support,fenders, inner fenders, hood complete in pics 150.00 pick up

ac panel slide broken 28.00 shipped lower 48

ac dash bare 30.00 pickup

glove box door with sticker 35.00(glove box has vin number on it so i will send the section cut out too. shipped lower 48

4 15x7 truck ralleys no tires and centers/rings 65.00 no shipping unless we agree.

steering column auto 35.00 pick up no shipping unless we agree.

what ever u need let me know crushing the rest/or dad is steeling it off for his woods truck(bed/fuel tank/rear glass/ is his the rest is up for grabs.)

03-04-2009, 01:09 AM	#1
GRUMPYONE Registered User Join Date: Jan 2009 Location: CHATTANOOGA TN Posts: 95	72 lwb parting out I got a 72 lwb air/was big block. Cab is rusted but the glove box still has the option sticker on it. Dash is in good shape except someone cut the radio hole and folded the taps back not a big deal to fix. All the brakes are still working and holding fluid. I will part it out, sell, or trade. I need a radio for my 67(doesn't have to work just nice to put back in the fac hole), buckets whatcha got. I would like to get 500.00 for all of it, but will trade its in the way. __________________ ALWAYS A DOLLAR SHORT THAN A DAY LATE MY WIFES 70 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=437272

03-04-2009, 03:02 AM	#2
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,747	Re: 72 lwb parting out Any of the original a/c compressor mounting brackets around yet?

03-04-2009, 07:13 AM	#3
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 72 lwb parting out I can use the brake booster\ master cyl setup and have nice am radio to trade

03-04-2009, 09:24 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 72 lwb parting out Engine mounts? Power steering set-up? What series is it? (c-10, custom 20, cheyenne?) Pics? Woodgrain glovebox door? Stainless hubcaps? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-04-2009, 09:51 AM	#5
71MUTT Can't ReMember Join Date: Dec 2006 Location: Orlando area Posts: 258	Re: 72 lwb parting out I'm looking for a set of black seat belts. __________________ Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running )

03-04-2009, 05:54 PM	#6
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,625	Re: 72 lwb parting out I've got some 69-70 bucket seats I might trade. Also wondering condition of truck - is it complete minus motor, trans? Custom or Cheyenne? Any other options? Thanks. Joshua __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

03-04-2009, 07:13 PM	#7
GRUMPYONE Registered User Join Date: Jan 2009 Location: CHATTANOOGA TN Posts: 95	Re: 72 lwb parting out CLASSIC BOWTIES- There are no ac brackets on the truck. when they removed the motor they took them. CHUCKMC8- If u can use the brake booster and master cyl i could trade. Radio doent haft to work just nice with nobs. lmk TOOMUCHSTUFF- The emblems say cheyenne10 and the motor mounts are told to me to be the big block(not sure). Power steering still hooked up lying in the motor bay, not wood grain dash, and no hub caps. It has ralleys on it. 71MUTT- Seat belts are brown gm. JQ-72- It is complete minus motor and trans. The seat is gone and is realy rough. I do have enough stuff to make a good front clip, but the cab is rusted bad around the bottom. I got it for the five lug and brake conversion, my 67 has already been done so dont need it. I will try to get some pics up thursday or friday. thanks __________________ ALWAYS A DOLLAR SHORT THAN A DAY LATE MY WIFES 70 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=437272

03-04-2009, 08:10 PM	#8
EdCoop Registered User Join Date: Jul 2008 Location: Greeneville, TN Posts: 4	Re: 72 lwb parting out I am interested in the rear end, if its for the coil spring suspension. How much are you asking for just the rear end?

03-04-2009, 08:21 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 72 lwb parting out Can you give me a price on the engine mounts and power steering setup with what ever brackets are there? Also any emblems that are in good shape? Does it have a toolbox door in the bedside? Thanks, Eric Pics will help to verify. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-04-2009, 08:25 PM	#11
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 72 lwb parting out I would like to get in line on the ps stuff. I may be coming to Chatanooga this weekend also. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

03-04-2009, 09:50 PM	#12
GRUMPYONE Registered User Join Date: Jan 2009 Location: CHATTANOOGA TN Posts: 95	Re: 72 lwb parting out Holding on the master cly and booster pending trade for radio to CHUCKMC8 EDCOOP- rear end is coil spring rear 100.00 u help pull out TOOMUCHSTUFF- Engine mounts, Powersteering set up(u help pull pump,lines, and box with pitman arm) all emblems on truck u want, 250.00 not toolbox on bed sorry. THELONERLIFE- Same deal as TOOMUCHSTUFF - 50.00 for mounts pending if he does not want. __________________ ALWAYS A DOLLAR SHORT THAN A DAY LATE MY WIFES 70 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=437272

03-04-2009, 10:05 PM	#13
EdCoop Registered User Join Date: Jul 2008 Location: Greeneville, TN Posts: 4	Re: 72 lwb parting out Sounds good for the rear end. I'll shoot you a PM about coming down and helping pull that out.

03-04-2009, 10:12 PM	#14
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: 72 lwb parting out I'll send a PM regarding the brake booster

03-04-2009, 10:56 PM	#15
GRUMPYONE Registered User Join Date: Jan 2009 Location: CHATTANOOGA TN Posts: 95	Re: 72 lwb parting out Ok CHUCKMC- Booster and master cyl will trade EDCOOP- Rear end yours pending details of pickup All others let me know if price is high let me know(trust me i know how hard times are, want to make friends not enemys). Will pull off parts and ship from my zip code 37379. You figure out shipping and let me know what you want and what you need or what u got you dont need. Will get pics up tomorrow. I also would like the fac side emblems for my 67(fender) and still would like to get some buckets. Got some out of a 89-90 with console but you guys ruined that with all the 67-72 bucket pics thanks lol __________________ ALWAYS A DOLLAR SHORT THAN A DAY LATE MY WIFES 70 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=437272 Last edited by GRUMPYONE; 03-04-2009 at 10:57 PM. Reason: IM STUPID

03-05-2009, 12:33 AM	#16
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 72 lwb parting out Well, i can't be any help pulling parts. Definatly interested in the motor mounts. Which fender emblems are you looking for? 10 series? I should have a nice pair of those. Would like to see some pics before i commit. I also wouldn't need the steering box and pitman. Just the pump, brackets and remote reservoir. I assume that is the style it is? Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

03-05-2009, 09:14 PM	#18
GRUMPYONE Registered User Join Date: Jan 2009 Location: CHATTANOOGA TN Posts: 95	Re: 72 lwb parting out Here are some pics of what i got. [IMG][/IMG] [IMG][/IMG] IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] __________________ ALWAYS A DOLLAR SHORT THAN A DAY LATE MY WIFES 70 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=437272

03-05-2009, 09:22 PM	#19
GRUMPYONE Registered User Join Date: Jan 2009 Location: CHATTANOOGA TN Posts: 95	Re: 72 lwb parting out more [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] The buckets are out of a mid 90 chevy and are in good condition with no tears with the console. Just not the right bucket for me. Let me know what u need. The rear end is sold to EDCOOP(ALSO PENDING SALE TO HIM ON THE FRONT suspension), and the mastercyl and booster is sold to CHUCKMC8. The yellow fenders are in great shape and the hood on the truck look good to(no if little surface rust). The ac panel has a broken piece at the back that slides the air control no big deal. The truck ralleys are 15x7 i have five of them. I can take anything off wires, dash, what ever you want let me know i need other parts for my truck. __________________ ALWAYS A DOLLAR SHORT THAN A DAY LATE MY WIFES 70 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=437272

03-05-2009, 09:42 PM	#20
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 72 lwb parting out how much for the bucket seats only? I'll pass on the ps stuff. by looking at the door panels and motor stands I think the truck is a 71 __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687 Last edited by thelonerife; 03-05-2009 at 09:44 PM.

03-06-2009, 02:04 AM	#22
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 72 lwb parting out Okay let me see if The board member that i'm going to meet in Chatanooga is good for this weekend. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

03-07-2009, 02:46 AM	#24
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 72 lwb parting out no word yet so i guess i'll pay for them and plan a road trip later . pm me your paypal or address for m/o __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

03-09-2009, 08:50 PM	#25
GRUMPYONE Registered User Join Date: Jan 2009 Location: CHATTANOOGA TN Posts: 95	Re: 72 lwb parting out Front suspension and rear end gone. master cyl/booster gone. front fenders(yellow in pics) 40.00 each whole complete front end in pics(core support,fenders, inner fenders, hood complete in pics 150.00 pick up ac panel slide broken 28.00 shipped lower 48 ac dash bare 30.00 pickup glove box door with sticker 35.00(glove box has vin number on it so i will send the section cut out too. shipped lower 48 4 15x7 truck ralleys no tires and centers/rings 65.00 no shipping unless we agree. steering column auto 35.00 pick up no shipping unless we agree. what ever u need let me know crushing the rest/or dad is steeling it off for his woods truck(bed/fuel tank/rear glass/ is his the rest is up for grabs.) __________________ ALWAYS A DOLLAR SHORT THAN A DAY LATE MY WIFES 70 BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=437272 Last edited by GRUMPYONE; 03-14-2009 at 08:56 PM. Reason: lower prices

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.