Upper rear spring cups, reproductions? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71C10SWB · 03-16-2009, 08:35 AM

Hey guys,
I'm new to the board. I just brought home my new '71 swb last weekend and I need to get rear coils on it. When I got it, the rear coils were removed and it was sitting on the overloads. I need to know if you can buy the upper cup that the coils fit into. The ones that are on it are rusted beyond recognition. I could build some, if needed. I have a set of coils and I still need to order the lower clamp plates, so if I could get the upper cups at the same ime, it would speed up the process.

Thanks,
Brent

1968SWBBigBlock · 03-16-2009, 09:13 AM

Check with early classic enterprises
http://www.earlyclassic.com/
I believe they will have what you are looking for - I know I just bought the lower cups from them

truckintexas · 03-16-2009, 01:32 PM

CutlassSMan, Sent you a PM.............

03-16-2009, 08:35 AM	#1
71C10SWB Registered User Join Date: Mar 2009 Location: Seymour, IN Posts: 42	Upper rear spring cups, reproductions? Hey guys, I'm new to the board. I just brought home my new '71 swb last weekend and I need to get rear coils on it. When I got it, the rear coils were removed and it was sitting on the overloads. I need to know if you can buy the upper cup that the coils fit into. The ones that are on it are rusted beyond recognition. I could build some, if needed. I have a set of coils and I still need to order the lower clamp plates, so if I could get the upper cups at the same ime, it would speed up the process. Thanks, Brent

03-16-2009, 09:13 AM	#2
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Upper rear spring cups, reproductions? Check with early classic enterprises http://www.earlyclassic.com/ I believe they will have what you are looking for - I know I just bought the lower cups from them __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

03-16-2009, 01:32 PM	#3
truckintexas Registered User Join Date: Jul 2004 Location: Weatherford, TX Posts: 225	Re: Upper rear spring cups, reproductions? CutlassSMan, Sent you a PM.............

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.