New member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kwplot34 · 03-16-2009, 09:57 PM

checking in to say HI to everyone. HI. I am new to this forum but am a member of several corvette forums, i have a 78 that i have restored. Just purchased a 1967 chevy truck,i will be the 2nd owner of it,has 283,auto trans,long bed 2WD,it is in California and i am flying out this Friday to meet up with the auto transport guy i hired to bring it back to Missouri. I saw it last August when i was out there with my vette for a cruise in and decided i had to have it,the truck is very clean,low miles and as far as i could tell was pretty much all original,really about all it needs is new paint,that southern Ca sun is hard on paint,and no rust anywhere on the truck that i could find. when i get it back here sometime next week i will post up some pics of it.
I paid $2,500 for the truck,could not turn it down for that price.

Later

Kevin

big_al_71 · 03-16-2009, 10:19 PM

Welcome from Miami!!!

post some picts when you get them...

67_C-30 · 03-16-2009, 10:22 PM

Welcome to the board!

We LOVE pics, so as soon as you get 'em, post 'em!

Bob 68327 · 03-16-2009, 10:25 PM

to the Board from Iowa !!!

Joe67 · 03-16-2009, 10:38 PM

Welcome!

Longhorn Man · 03-16-2009, 10:41 PM

if you are flying out there, you should drive it home! Gotta have faith!
Welcome to the forums... lookin forward to seeing your pics once it gets there.

FRENCHBLUE72 · 03-16-2009, 10:47 PM

Welcome to the boards..

Chevymann1968 · 03-16-2009, 10:53 PM

Welcome from LOUISIANA!~!!!!

kwplot34 · 03-17-2009, 01:31 AM

Quote:

Originally Posted by Longhorn Man

if you are flying out there, you should drive it home! Gotta have faith!
Welcome to the forums... lookin forward to seeing your pics once it gets there.

1345 miles is quite a long trip,and i want to get it home and check out all the mechanical s first and get some new tires on it,the ones that are on it now are pretty old and hard,i did think about driving it back the owner saw no reason why it should not make the trip,but it has not been driven much in years,just short trips,so i am going to play it safe. I plan on using the truck as a daily driver and quit driving my chevy diesel so much,the vette is not a good daily driver,poor fuel mileage and $10 bucks a gallon for gas gets expensive,it has a far from stock motor in it. The 283 is staying in the truck.

Longhorn Man! my first vehicle that i purchased when i was 15 was a 1970 chevy Long Horn,wish i had not sold that truck and had kept it,if i only knew then what i know now about the rising value of vehicles

of course this was back in 1984 when i sold it.

When it gets here i will post plenty of pic's,and pick your guy's brains about this truck,can't wait for it to get here.

Kevin

kwplot34 · 03-17-2009, 01:34 AM

Thank You for all the WELCOMES guy's. Just from looking around this place seems more laid back than the Corvette forums.

67_C-30 · 03-17-2009, 07:04 AM

Quote:

Originally Posted by kwplot34

Thank You for all the WELCOMES guy's. Just from looking around this place seems more laid back than the Corvette forums.

Corvette guys are - um - let's say different.

I say this having owned a few, but there's a bunch of the hardcore Corvette guys that seem to think they are on a higher rung of the ladder of self-worth because they own a 'Vette. This is very close knit board, and you won't find a better bunch of guys and gals anywhere on the net.

**SWB** · 03-17-2009, 09:23 AM

From Central Illinois

STOCKISH · 03-17-2009, 10:01 AM

on the purchase. And

to the forum from North Carolina. Cant wait to see pics.

monte0185 · 03-17-2009, 10:26 AM

Welcome and Congrats!! Personally i think a vette is nothing but a hunk of fiberglass on some wheels!! But i will give them cudos on the drive terrain and I wouldnt pass up a 67 convertible 427 4speed if it were give to me anyway. Good luck with the truck and I say drive it back as well!! Nothing like a 1400 mile road trip to work out the bugs. Just bring your tools and watch the stickers you put on the cooler you keep them in LOL.

my67chevytruck · 03-17-2009, 10:36 AM

welcome, and congrats on your Truck purchase.

**VetteVet** · 03-17-2009, 11:52 AM

Are you a member here?
http://forums.corvetteforum.com/index.php

You will like it here, it is pretty relaxed and the mods do a great job keeping things under control. Just read the rules and don't talk about religion or politics, and you'll enjoy it immensely.

Robert8096 · 03-17-2009, 12:26 PM

Quote:

Originally Posted by 67_C-30

Corvette guys are - um - let's say different.

I say this having owned a few, but there's a bunch of the hardcore Corvette guys that seem to think they are on a higher rung of the ladder of self-worth because they own a 'Vette. This is very close knit board, and you won't find a better bunch of guys and gals anywhere on the net.

That is why I got rid of both of mine. It use to crack me up when I went to the club functions, when I drove my 80 the newer c5 crowd would not talk to me and when I drove my 03 C5 the c5 crowd would talk to me. Now there were a few members who would talk to me no matter which one I was in. The second reason is that I see Corvettes everywhere.

What I wish I never got rid of was my 05 LS6/six speed SSR.

maddog1331 · 03-17-2009, 12:50 PM

Welcome from Somerset, Kentucky

jbristo67 · 03-17-2009, 01:02 PM

Welcome from texas> My brother lives in Crane where is liberty???

**El Jay** · 03-17-2009, 01:43 PM

Welcome from the People's Republik.

C20-67_N_MO · 03-17-2009, 01:48 PM

from the East side of Missouri.

kwplot34 · 03-17-2009, 02:02 PM

Quote:

Originally Posted by jbristo67

Welcome from texas> My brother lives in Crane where is liberty???

Liberty is NE of KC MO, I live about 10 mins south of smithville lake if that helps.

VetteVet, CF no I am not a member on that site anymore,I was once for a quite a while but left and moved on to another.

kwplot34 · 03-17-2009, 02:06 PM

Quote:

Originally Posted by Robert8096

That is why I got rid of both of mine. It use to crack me up when I went to the club functions, when I drove my 80 the newer c5 crowd would not talk to me and when I drove my 03 C5 the c5 crowd would talk to me. Now there were a few members who would talk to me no matter which one I was in. The second reason is that I see Corvettes everywhere.

What I wish I never got rid of was my 05 LS6/six speed SSR.

Yea they can be a finicky crowd sometimes,but give up my C3 no way,too much time and money invested in it, I am way upside down in this car

ChevLoRay · 03-17-2009, 02:24 PM

Quote:

Originally Posted by kwplot34

Yea they can be a finicky crowd sometimes,but give up my C3 no way,too much time and money invested in it, I am way upside down in this car

I don't know how most of us can be anything BUT upside-down when owning a vehicle.....unless we got it on the cheap and didn't do anything to it and the thing appreciated for some unknown reason.

But, Welcome! from the Heart of Arkansas!

72BlckButy · 03-17-2009, 09:39 PM

to the board from Mid-MO!!!

You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more.

Be sure to mark you calendar for the Midwest All Truck Nat's in Riverside, MO (September 11-13).

And the Midwest Board Meet in Kirksville, MO (May 30-31)

03-16-2009, 09:57 PM	#1
kwplot34 Registered User Join Date: Mar 2009 Location: Liberty, Missouri Posts: 35	New member checking in to say HI to everyone. HI. I am new to this forum but am a member of several corvette forums, i have a 78 that i have restored. Just purchased a 1967 chevy truck,i will be the 2nd owner of it,has 283,auto trans,long bed 2WD,it is in California and i am flying out this Friday to meet up with the auto transport guy i hired to bring it back to Missouri. I saw it last August when i was out there with my vette for a cruise in and decided i had to have it,the truck is very clean,low miles and as far as i could tell was pretty much all original,really about all it needs is new paint,that southern Ca sun is hard on paint,and no rust anywhere on the truck that i could find. when i get it back here sometime next week i will post up some pics of it. I paid $2,500 for the truck,could not turn it down for that price. Later Kevin

03-16-2009, 10:19 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: New member Welcome from Miami!!! post some picts when you get them... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-16-2009, 10:22 PM	#3
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: New member Welcome to the board! We LOVE pics, so as soon as you get 'em, post 'em! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

03-16-2009, 10:25 PM	#4
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: New member to the Board from Iowa !!! __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

03-16-2009, 10:38 PM	#5
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: New member Welcome! __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

03-16-2009, 10:41 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: New member if you are flying out there, you should drive it home! Gotta have faith! Welcome to the forums... lookin forward to seeing your pics once it gets there.

03-16-2009, 10:47 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: New member Welcome to the boards.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-16-2009, 10:53 PM	#8
Chevymann1968 Registered User Join Date: Sep 2008 Location: Houma LA Posts: 193	Re: New member Welcome from LOUISIANA!~!!!! __________________ 1968 GMC Rebuilding Stage 2001 Camaro SS SOLD

03-17-2009, 01:34 AM	#10
kwplot34 Registered User Join Date: Mar 2009 Location: Liberty, Missouri Posts: 35	Re: New member Thank You for all the WELCOMES guy's. Just from looking around this place seems more laid back than the Corvette forums.

03-17-2009, 09:23 AM	#12
SWB Active Member Join Date: Nov 2008 Location: Jacksonville Illinois Posts: 180	Re: New member From Central Illinois __________________ K10 SWB. Orange/White 69 Ford F100 21K Actual Miles, 2nd owner in family since new *67 Chevy II RestoMod, Wilwood all around, Heights Pro G front sub,, Shockwave Air Ride, 383cu in etc..

03-17-2009, 10:01 AM	#13
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: New member on the purchase. And to the forum from North Carolina. Cant wait to see pics. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-17-2009, 10:26 AM	#14
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: New member Welcome and Congrats!! Personally i think a vette is nothing but a hunk of fiberglass on some wheels!! But i will give them cudos on the drive terrain and I wouldnt pass up a 67 convertible 427 4speed if it were give to me anyway. Good luck with the truck and I say drive it back as well!! Nothing like a 1400 mile road trip to work out the bugs. Just bring your tools and watch the stickers you put on the cooler you keep them in LOL. __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

03-17-2009, 10:36 AM	#15
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: New member welcome, and congrats on your Truck purchase. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-17-2009, 11:52 AM	#16
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,718	Re: New member Are you a member here? http://forums.corvetteforum.com/index.php You will like it here, it is pretty relaxed and the mods do a great job keeping things under control. Just read the rules and don't talk about religion or politics, and you'll enjoy it immensely. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

03-17-2009, 12:50 PM	#18
maddog1331 Registered User Join Date: Feb 2009 Location: Somerset, KY Posts: 398	Re: New member Welcome from Somerset, Kentucky



Register or Log In To remove these advertisements.

03-17-2009, 01:02 PM	#19
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: New member Welcome from texas> My brother lives in Crane where is liberty??? __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

03-17-2009, 01:43 PM	#20
El Jay Gone to greener pastures Join Date: May 2007 Location: Gateway to the Delta Posts: 7,354	Re: New member Welcome from the People's Republik. __________________ '69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck

03-17-2009, 01:48 PM	#21
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: New member from the East side of Missouri. __________________ Coming Soon: Project 1970 Country Truck

03-17-2009, 09:39 PM	#25
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: New member to the board from Mid-MO!!! You'll find this place to become your second home. There's tons of information, friends, parts, .... and so much more. Be sure to mark you calendar for the Midwest All Truck Nat's in Riverside, MO (September 11-13). And the Midwest Board Meet in Kirksville, MO (May 30-31) __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.