1969 369 big block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drbyrdman · 03-29-2009, 05:20 PM

$1500. was for my project but I have a ton of taxes to pay. So my project is on hold or done for now. matching heads, block and crank.
541-388-0978
541-948-2263
dbyrd@bendbroadband.com

tim21391 · 03-31-2009, 12:37 PM

could this fit in a 95 chevy cheyenne 1500 single cab... its got a v6 now with a 700r4... my friend is interested in a v8..

Jtrux · 03-31-2009, 12:43 PM

Quote:

Originally Posted by tim21391

could this fit in a 95 chevy cheyenne 1500 single cab... its got a v6 now with a 700r4... my friend is interested in a v8..

It wouldn't be cheap. Injection, brackets, pulleys, exhaust, all would need modification as well as clearance issues. I'd pass for a 350 if I was him.

drunkbus · 03-31-2009, 01:36 PM

Any further info? Who built the engine, you or a shop? Receipts, specs, cam, etc.?

drbyrdman · 03-31-2009, 08:48 PM

I got it in a trade. it has trw .30 over pistons, edelbrock cam,lifters,intake,timing chain and the heads redone. should be a good motor. just need to pay taxes. so i have to sell something.

Lucky1 · 03-31-2009, 08:51 PM

Shipping to V1R 3B6

drbyrdman · 03-31-2009, 10:20 PM

sorry. Pickup only

drbyrdman · 04-02-2009, 05:05 PM

sold

03-29-2009, 05:20 PM	#1
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	1969 369 big block $1500. was for my project but I have a ton of taxes to pay. So my project is on hold or done for now. matching heads, block and crank. 541-388-0978 541-948-2263 dbyrd@bendbroadband.com Last edited by drbyrdman; 09-07-2009 at 11:51 AM.

03-31-2009, 12:37 PM	#2
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: 1969 369 big block could this fit in a 95 chevy cheyenne 1500 single cab... its got a v6 now with a 700r4... my friend is interested in a v8.. __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

03-31-2009, 01:36 PM	#4
drunkbus New Member Join Date: Jun 2007 Location: Coos Bay, OR Posts: 1,077	Re: 1969 369 big block Any further info? Who built the engine, you or a shop? Receipts, specs, cam, etc.?

03-31-2009, 08:48 PM	#5
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: 1969 369 big block I got it in a trade. it has trw .30 over pistons, edelbrock cam,lifters,intake,timing chain and the heads redone. should be a good motor. just need to pay taxes. so i have to sell something.

03-31-2009, 08:51 PM	#6
Lucky1 Registered User Join Date: Feb 2007 Location: Canada Posts: 9	Re: 1969 369 big block Shipping to V1R 3B6

03-31-2009, 10:20 PM	#7
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: 1969 369 big block sorry. Pickup only

04-02-2009, 05:05 PM	#8
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: 1969 369 big block sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.