Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-21-2009, 04:31 PM | #1 |
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
68 Transfer case mount help
I am trying to install my mounting bracket from the xfer case to the frame, and I am having trouble making sure it is right. Does anyone have a good picture of how their mount is set up, just as long as it is just like mine (stock). Oh, and my xfer case is the original T-221 Rockwell.
I tried putting it together according to the assembly manual I have, but it won't go together with the bracket on the frame. It's like the rubber and the single dual hole washer is to thick? Plus, mine originally had two very large washers and they are not depicted in the manual? Any help would be greatly appreciated! Thanks, Chris
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
04-21-2009, 04:55 PM | #2 |
Got big-block?
Join Date: Jul 2000
Location: Austin, Texas
Posts: 2,453
|
Re: 68 Transfer case mount help
Don't know if it's much help, but I just installed my transfer case...used a new set of bushings/sleeves from Energy Suspension...I pressed the new bushings into the bracket by hand...loosely bolted the bracket to the frame so I could slide things around a bit to get it lined up...had to manuever the t-case around a bit as well...got the t-case bolts started, then went to tightening everything up.
Casey
__________________
'68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396 |
04-21-2009, 08:32 PM | #3 |
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: 68 Transfer case mount help
Yea, I got a pry bar and persuaded the bolt holes to line up on the xfer case bracket. But, the frame side bracket holes dont line up - yet. I am gonna let it sit like that for a while and see if the rubber compresses a little more in order for the holes to line up.
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU Last edited by vectorit; 04-21-2009 at 08:33 PM. |
04-23-2009, 09:17 AM | #4 |
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Re: 68 Transfer case mount help
Here are a couple pics of how my Rockwell mount was positioned
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|