292 Engine Parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glimmertwin01 · 05-23-2009, 05:26 PM

ok Stupid request.. could you get me some pictures of the engine mounts specifically how they are attached to themotor thru the cross memeber and to the block mount? the PO had taken the motor out and the one I got was already out of the truck with the c shaped rubber mount and the small square rubber and bolts already set aside.. I may be missing something or just having a brain fart but i want to get the motor in my truck with all the mounts properly installed

6packed · 05-23-2009, 07:17 PM

Quote:

Originally Posted by glimmertwin01

ok Stupid request.. could you get me some pictures of the engine mounts specifically how they are attached to themotor thru the cross memeber and to the block mount? the PO had taken the motor out and the one I got was already out of the truck with the c shaped rubber mount and the small square rubber and bolts already set aside.. I may be missing something or just having a brain fart but i want to get the motor in my truck with all the mounts properly installed

Sorry the only pic's I had, are already posted, I have now replaced the engine to a 350 & lost the front cross section to a straight axle , making a 1967 4x4 truck now.
Thanks

**wancosc356** · 05-24-2009, 01:25 PM

what year is the engine? do u have a picture of the upper and lower alternator mounts? I need the bottom one and may take the upper one if it is in better shape than mine. Also, could you send me a pic of your fan pulley? I think mine isn't right. And also, how is the driver side motor mount? Mine is missing a bolt. Let me know. Thanks.

6packed · 05-25-2009, 04:27 PM

Quote:

Originally Posted by wancosc356

what year is the engine? do u have a picture of the upper and lower alternator mounts? I need the bottom one and may take the upper one if it is in better shape than mine. Also, could you send me a pic of your fan pulley? I think mine isn't right. And also, how is the driver side motor mount? Mine is missing a bolt. Let me know. Thanks.

I'll post pic's later today.

nplocoman · 05-25-2009, 04:51 PM

I am interested in the front dampener/pulley. Is it a 3 groove?

**wancosc356** · 05-25-2009, 06:10 PM

Quote:

Originally Posted by 6packed

I'll post pic's later today.

Ok. Sounds good. Thanks

6packed · 05-25-2009, 06:32 PM

Quote:

Originally Posted by wancosc356

what year is the engine? do u have a picture of the upper and lower alternator mounts? I need the bottom one and may take the upper one if it is in better shape than mine. Also, could you send me a pic of your fan pulley? I think mine isn't right. And also, how is the driver side motor mount? Mine is missing a bolt. Let me know. Thanks.

1967 Chevy 292 cid, 3 on the tree, Picture's

**wancosc356** · 05-25-2009, 06:51 PM

Thanks for the pics. Can i see a pic of the fan pulley and also, a side view of the lower alternator mount? Thanks

6packed · 05-25-2009, 07:44 PM

More picture's

**wancosc356** · 05-25-2009, 08:19 PM

Gonna pass. Thanks anyways

daverod · 12-18-2009, 04:34 PM

Do you have the water outlet housing? It's the part the thermostate sits on. Its bolted onto the block, the water necK is bolted on to the other end.

N2GMTrux · 12-18-2009, 07:56 PM

What is left of the motor mounts for the 292 engine, in the last pic I can see the driver side is still on the engine. Do you have the pasenger side still

dabruce15 · 10-29-2010, 01:24 PM

Any 292 parts still available? I need the 3 groove harmonic balancer, water pump, alternator bracket...

05-23-2009, 05:26 PM	#26
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 292 Engine Parts ok Stupid request.. could you get me some pictures of the engine mounts specifically how they are attached to themotor thru the cross memeber and to the block mount? the PO had taken the motor out and the one I got was already out of the truck with the c shaped rubber mount and the small square rubber and bolts already set aside.. I may be missing something or just having a brain fart but i want to get the motor in my truck with all the mounts properly installed __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

05-24-2009, 01:25 PM	#28
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 292 Engine Parts what year is the engine? do u have a picture of the upper and lower alternator mounts? I need the bottom one and may take the upper one if it is in better shape than mine. Also, could you send me a pic of your fan pulley? I think mine isn't right. And also, how is the driver side motor mount? Mine is missing a bolt. Let me know. Thanks.

05-25-2009, 04:51 PM	#30
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: 292 Engine Parts I am interested in the front dampener/pulley. Is it a 3 groove?

05-25-2009, 06:51 PM	#33
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 292 Engine Parts Thanks for the pics. Can i see a pic of the fan pulley and also, a side view of the lower alternator mount? Thanks

05-25-2009, 07:44 PM	#34
6packed OL' YELLER Join Date: Mar 2009 Location: Bellingham, Wa Posts: 178	Re: 292 Engine Parts More picture's Attached Images __________________ CALLING IT QUITS - LETS MAKE A DEAL 1967 GMC - Ol' Yeller - 305 V6 cid 1967 GMC 4x4 - Ol' Black'er - 292cid ( project) 1967 Chevy Ol' ???? -Parting out 1971 GMC - Ol' Grey'er (parting out) - 350cid 1969 GMC - Ol' Red'er (parting out) 1970 Chevy - Ol' Primer (parting out) & counting 1995 Blazer

05-25-2009, 08:19 PM	#35
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 292 Engine Parts Gonna pass. Thanks anyways Last edited by wancosc356; 07-03-2009 at 11:38 PM.

12-18-2009, 04:34 PM	#36
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 292 Engine Parts Do you have the water outlet housing? It's the part the thermostate sits on. Its bolted onto the block, the water necK is bolted on to the other end. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 12-18-2009 at 05:09 PM.

12-18-2009, 07:56 PM	#37
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: 292 Engine Parts What is left of the motor mounts for the 292 engine, in the last pic I can see the driver side is still on the engine. Do you have the pasenger side still __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640

10-29-2010, 01:24 PM	#38
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: 292 Engine Parts Any 292 parts still available? I need the 3 groove harmonic balancer, water pump, alternator bracket... __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.