Where can I get the door mirror mount thing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Field and Son · 06-01-2009, 07:46 PM

I went to mount a pair of spor mirrors on my truck today and realized I am missing the part inside the door with door that takes the three bolts from the mirror in a trinagular bolt pattern. Not sure how you would get one back in and hold in place to mount the mirrors, but I am sure it must be able to get done. I only need one of these and the three bolts. Any ideas??

JimKshortstep4x4 · 06-01-2009, 07:49 PM

What year truck do you need the parts for?

Jim

Field and Son · 06-01-2009, 08:42 PM

Part needed is for a 1970.

**70C10Toejam** · 06-01-2009, 09:48 PM

I got mine here...67-69 outside mirror bracket bottom row 2nd from left
http://www.classicparts.com/Mirrors/products/320/3/0
back when they were ChevyDuty

fishingjred73 · 06-01-2009, 10:46 PM

I lost mine so I made some. Used a piece of 3/16 steel drilled and tapped holes to match mirror.

UltraBlue71 · 06-02-2009, 12:23 AM

I have 3 or four of them OEM sandblasted and painted 10 bucks a pair plus shipping PM if you are interested, I use a piece of wire fished through the door to hold the braket to start the first screw then you can get the other two in after.

Southern C10 · 06-02-2009, 04:08 AM

Quote:

Originally Posted by UltraBlue71

I have 3 or four of them OEM sandblasted and painted 10 bucks a pair plus shipping PM if you are interested, I use a piece of wire fished through the door to hold the braket to start the first screw then you can get the other two in after.

I would like a set of those but if you only have 3 plates I will let Field and Son have first shot at them. If you have two sets PM me payment info. Shipping is to 37043

**special-K** · 06-02-2009, 06:03 AM

Is Classic Parts saying`70s came with the 71/72 sport mirrors?I always thought they were 71/72-only and the "stick mirrors" were standard on 67-70.

06-01-2009, 07:46 PM	#1
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Where can I get the door mirror mount thing I went to mount a pair of spor mirrors on my truck today and realized I am missing the part inside the door with door that takes the three bolts from the mirror in a trinagular bolt pattern. Not sure how you would get one back in and hold in place to mount the mirrors, but I am sure it must be able to get done. I only need one of these and the three bolts. Any ideas??

06-01-2009, 07:49 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Where can I get the door mirror mount thing What year truck do you need the parts for? Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

06-01-2009, 08:42 PM	#3
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Where can I get the door mirror mount thing Part needed is for a 1970.

06-01-2009, 09:48 PM	#4
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: Where can I get the door mirror mount thing I got mine here...67-69 outside mirror bracket bottom row 2nd from left http://www.classicparts.com/Mirrors/products/320/3/0 back when they were ChevyDuty __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

06-01-2009, 10:46 PM	#5
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 812	Re: Where can I get the door mirror mount thing I lost mine so I made some. Used a piece of 3/16 steel drilled and tapped holes to match mirror. __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

06-02-2009, 12:23 AM	#6
UltraBlue71 Registered User Join Date: Feb 2009 Location: OKC OK Posts: 489	Re: Where can I get the door mirror mount thing I have 3 or four of them OEM sandblasted and painted 10 bucks a pair plus shipping PM if you are interested, I use a piece of wire fished through the door to hold the braket to start the first screw then you can get the other two in after. __________________ "You can put lipstick on a pig, sure it's pretty pig, but it's still just a PIG... 71 LWB Last edited by UltraBlue71; 06-02-2009 at 12:25 AM.

06-02-2009, 06:03 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Where can I get the door mirror mount thing Is Classic Parts saying`70s came with the 71/72 sport mirrors?I always thought they were 71/72-only and the "stick mirrors" were standard on 67-70. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.