wtb: 68-72 big block 3spd/4spd zbar engine pivot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BIGJAKE97** · 06-14-2009, 06:55 PM

i'm looking for a 68-72 big block, 396/402, 3 speed/4 speed zbar/bellcrank/ clutch pivot bar, engine pivot bracket. it has two bolts holding it to the engine with a stud coming out of the bracket for the zbar to pivot on. just like the one in the pics. any help with tracking one of these down will be very helpfull. i don't need the zbar, i actually found a nos one, but will buy the complete setup if needed. thanks, jake

petey-pablo · 06-16-2009, 04:01 AM

Bump

petey-pablo · 06-18-2009, 07:37 AM

Any Luck in the hunt for this part? If not heres a bump for you hope someone has one, cuz we gotta get that truck on the road it's bad enough mine isn't going to be ready anytime soon.............TTT

**jerry moss** · 06-18-2009, 08:49 AM

is this a "needle in a haystack" item or what ?
ttt for you Jake. come on guys/gals, Jake is a good guy, can't someone help him out.

**BIGJAKE97** · 06-18-2009, 12:41 PM

no luck yet. yes it is a "needle in a haystack," but i found a nos bb zbar and i thought that was imposible! thanks guys for the bumps and the kind words. have you ever had one jerry? or how many have you even seen. -jake

**BIGJAKE97** · 06-26-2009, 02:00 PM

ttt for the weekend!

**BIGJAKE97** · 08-08-2009, 12:59 PM

i thought i'll try this again.

petey-pablo · 08-13-2009, 08:07 AM

anything yet?

petey-pablo · 09-08-2009, 05:48 AM

TTT..................Come on now can anyone help Jake out, If I could find it I would buy it for him, He has helped me out alot? So If you have it PM me or Jake We would be glad to take it off your hands..

**BIGJAKE97** · 09-26-2009, 01:53 AM

no, nothing yet. still looking. thanks for the bumps, pablo.

petey-pablo · 09-29-2009, 05:09 AM

Bummer.... Ttt

**BIGJAKE97** · 11-14-2009, 10:20 PM

i thought i would try again!

petey-pablo · 01-08-2010, 07:57 AM

Ttt

Duncan and son · 01-08-2010, 11:02 AM

I am headed to the shop and look, may be able to help.
Paul

**BIGJAKE97** · 05-16-2010, 04:16 AM

back to the top. still searching for the engine pivot bracket!

'72_GMC · 12-08-2010, 08:44 PM

Where does the smaller forward bolt screw into? It appears to fit about there that oil passage plug is?

**southern parts** · 12-09-2010, 08:15 AM

I have one if i can find it. it will be this weekend before i can look for it. woody

'72_GMC · 12-09-2010, 08:32 AM

That would be awesome, thanks

**BIGJAKE97** · 12-09-2010, 01:34 PM

both bolts goes through the bracket and into the block. if you have a big block, you shouldbe able to see the two flat spots and the threads on the block.

southern parts, i do believe i should get first shot at one if you have one for sale, being that it's my thread and i'v been looking for over a year and a half.

-man that would be messed up if someone else got one before me off of my thread! duncan and son never came through?

-thanks, jake

**southern parts** · 12-09-2010, 02:39 PM

Jake- My bad, i wasn`t paying attention, i thought i was dealing with the person who started the thread. you do have first shot. it`s $35 shipped. I`m working away from home and wont be able to look for it until this weekend. Woody

petey-pablo · 12-09-2010, 03:22 PM

Quote:

Originally Posted by southern parts

Jake- My bad, i wasn`t paying attention, i thought i was dealing with the person who started the thread. you do have first shot. it`s $35 shipped. I`m working away from home and wont be able to look for it until this weekend. Woody

Finally ! Hope this works out for you JAKE. THE MISSING LINK Thanks to southern parts ..

'72_GMC · 12-09-2010, 03:31 PM

Hey, that's not fair, I made a deal for that hours ago.

Quote:

Originally Posted by southern parts

Jake- My bad, i wasn`t paying attention, i thought i was dealing with the person who started the thread. you do have first shot. it`s $35 shipped. I`m working away from home and wont be able to look for it until this weekend. Woody

petey-pablo · 12-09-2010, 03:39 PM

Quote:

Originally Posted by '72_GMC

Hey, that's not fair, I made a deal for that hours ago.

'72_GMC Read the forum rules Buying and Selling Code of Conduct In the link below. You cant just Highjack someone elses thread Jake has been looking for this part for over a year sorry it has to go this way.southern parts cant just jump over Jake the poster of this thread and sell it to you.
http://67-72chevytrucks.com/vboard/a...nt.php?f=8&a=8

'72_GMC · 12-09-2010, 04:06 PM

That code of conduct doesn't say anything about that, Jake said he thought he already bought one "duncan and son never came through" Just because he had this thread going for a year and half doesn't give him first right to buy every z-Bar Pivot in the country, Now granted, this is Jakes thread, and he certainly deserves some consideration, but WoW, I did say I would take it.

My original question remains, Jake said 2 Bolt holes on the block... for a small block there is 2, and while the Big block has the same 2 holes, that SB bracket will not fit, from the look of Jakes Photos, it looks like it will fit the big bolt and perhaps that oil port.

Maybe Jake won't want to answer my question any more while I'm trying to snake that part out from under him, but I can't even see how it works without one in my hand, sure would like to at least Borrow the thing so I could copy it. See my photo, where is the other bolt hole?

**truckdude239** · 12-09-2010, 06:20 PM

72 gmc you broke the rules plain and simple you high jacked someone else thread which is a no no and then went around the rules because you have to be a site supporter to post wtbs on here and posted in someone else thread

06-14-2009, 06:55 PM	#1
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	wtb: 68-72 big block 3spd/4spd zbar engine pivot i'm looking for a 68-72 big block, 396/402, 3 speed/4 speed zbar/bellcrank/ clutch pivot bar, engine pivot bracket. it has two bolts holding it to the engine with a stud coming out of the bracket for the zbar to pivot on. just like the one in the pics. any help with tracking one of these down will be very helpfull. i don't need the zbar, i actually found a nos one, but will buy the complete setup if needed. thanks, jake Attached Images __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

06-16-2009, 04:01 AM	#2
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot Bump __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

06-18-2009, 07:37 AM	#3
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot Any Luck in the hunt for this part? If not heres a bump for you hope someone has one, cuz we gotta get that truck on the road it's bad enough mine isn't going to be ready anytime soon.............TTT __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

06-18-2009, 08:49 AM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot is this a "needle in a haystack" item or what ? ttt for you Jake. come on guys/gals, Jake is a good guy, can't someone help him out. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

06-18-2009, 12:41 PM	#5
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot no luck yet. yes it is a "needle in a haystack," but i found a nos bb zbar and i thought that was imposible! thanks guys for the bumps and the kind words. have you ever had one jerry? or how many have you even seen. -jake Attached Images __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

06-26-2009, 02:00 PM	#6
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot ttt for the weekend! __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

08-08-2009, 12:59 PM	#7
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot i thought i'll try this again. __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

08-13-2009, 08:07 AM	#8
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot anything yet? __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

09-08-2009, 05:48 AM	#9
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot TTT..................Come on now can anyone help Jake out, If I could find it I would buy it for him, He has helped me out alot? So If you have it PM me or Jake We would be glad to take it off your hands.. __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

09-26-2009, 01:53 AM	#10
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot no, nothing yet. still looking. thanks for the bumps, pablo. __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

09-29-2009, 05:09 AM	#11
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot Bummer.... Ttt __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

11-14-2009, 10:20 PM	#12
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot i thought i would try again! __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

01-08-2010, 07:57 AM	#13
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot Ttt __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

01-08-2010, 11:02 AM	#14
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot I am headed to the shop and look, may be able to help. Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

05-16-2010, 04:16 AM	#15
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot back to the top. still searching for the engine pivot bracket! __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!



Register or Log In To remove these advertisements.

12-08-2010, 08:44 PM	#16
'72_GMC Registered User Join Date: Aug 2008 Location: Graham, WA Posts: 54	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot Where does the smaller forward bolt screw into? It appears to fit about there that oil passage plug is?

12-09-2010, 08:15 AM	#17
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot I have one if i can find it. it will be this weekend before i can look for it. woody

12-09-2010, 08:32 AM	#18
'72_GMC Registered User Join Date: Aug 2008 Location: Graham, WA Posts: 54	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot That would be awesome, thanks

12-09-2010, 01:34 PM	#19
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot both bolts goes through the bracket and into the block. if you have a big block, you shouldbe able to see the two flat spots and the threads on the block. southern parts, i do believe i should get first shot at one if you have one for sale, being that it's my thread and i'v been looking for over a year and a half. -man that would be messed up if someone else got one before me off of my thread! duncan and son never came through? -thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

12-09-2010, 02:39 PM	#20
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,472	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot Jake- My bad, i wasn`t paying attention, i thought i was dealing with the person who started the thread. you do have first shot. it`s $35 shipped. I`m working away from home and wont be able to look for it until this weekend. Woody

12-09-2010, 04:06 PM	#24
'72_GMC Registered User Join Date: Aug 2008 Location: Graham, WA Posts: 54	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot That code of conduct doesn't say anything about that, Jake said he thought he already bought one "duncan and son never came through" Just because he had this thread going for a year and half doesn't give him first right to buy every z-Bar Pivot in the country, Now granted, this is Jakes thread, and he certainly deserves some consideration, but WoW, I did say I would take it. My original question remains, Jake said 2 Bolt holes on the block... for a small block there is 2, and while the Big block has the same 2 holes, that SB bracket will not fit, from the look of Jakes Photos, it looks like it will fit the big bolt and perhaps that oil port. Maybe Jake won't want to answer my question any more while I'm trying to snake that part out from under him, but I can't even see how it works without one in my hand, sure would like to at least Borrow the thing so I could copy it. See my photo, where is the other bolt hole? Attached Images

12-09-2010, 06:20 PM	#25
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: wtb: 68-72 big block 3spd/4spd zbar engine pivot 72 gmc you broke the rules plain and simple you high jacked someone else thread which is a no no and then went around the rules because you have to be a site supporter to post wtbs on here and posted in someone else thread __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.