NP205 shift pattern??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale DuBose · 03-31-2003, 03:58 PM

I'm trying to figure out what position the shift rails must be in to engage the different gears. Such as the shifter rod closer to the input shaft works the rear, but what does it do in and out? The shifter rod closest to the front output works the front, but what does it do in and out? I guess I'm trying to say when is it in hi and low, shift rod in or out?

Blazer1970 · 03-31-2003, 04:04 PM

Low range is with both shift rails pushed all the way back into the case. The rest should be easy to figure out by operating the rails manually.

03-31-2003, 03:58 PM	#1
Dale DuBose Registered User Join Date: Oct 2002 Posts: 27	NP205 shift pattern??? I'm trying to figure out what position the shift rails must be in to engage the different gears. Such as the shifter rod closer to the input shaft works the rear, but what does it do in and out? The shifter rod closest to the front output works the front, but what does it do in and out? I guess I'm trying to say when is it in hi and low, shift rod in or out? __________________ I need all the help I can get.

03-31-2003, 04:04 PM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	Low range is with both shift rails pushed all the way back into the case. The rest should be easy to figure out by operating the rails manually. __________________ Tim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.