Another fuel cell question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

07SSSC · 07-13-2009, 03:23 PM

Summit fuel cells. I know it's been covered a million times, but I never came across a part number that everyone was using. I'm thinking it would be a good idear to order one that'll fit and seeing as how so many have gone this route maybe someone could chime in? My main priority/project is getting the tank moved soon.

07SSSC · 07-13-2009, 08:37 PM

ttt
anyone?

67chevemall · 07-14-2009, 11:14 AM

I just put the 16gal under my bed. Get the one with the foam and sensor or you'll regret it....

67chevemall · 07-14-2009, 11:16 AM

http://www.summitracing.com/parts/SUM-290108/

Slick67 · 07-14-2009, 11:31 AM

Yep, they fit pretty good too. Just a little trimming on the right rear crossrail.
Name: 4fuelcell.jpg
Views: 444
Size: 47.8 KB

07SSSC · 07-14-2009, 11:45 AM

Thanks guys, so what are you using to mount them?

67chevemall · 07-14-2009, 11:51 AM

http://www.summitracing.com/parts/SUM-290154/

And four self tappn clading screws

07SSSC · 07-14-2009, 11:54 AM

Perfect, that'll definitely be my next purchase.

Slick67 · 07-14-2009, 12:22 PM

You will have to "fill up" through the bed floor, but trap doors are easy to find.

07SSSC · 07-14-2009, 01:47 PM

So did you guys run -8 all the way up, I'm thinking that's awfully big and -6 is probably more then enough plus it seems to be much more common. Anyone running from the cell to a hard line?

Oh, and did you just cap off the return line if it wasn't needed?

Slick67 · 07-14-2009, 02:03 PM

Not to that point as of yet. Still working on the body.

68fixeruper · 07-14-2009, 02:13 PM

ya -8 seems huge slick 67 do u have a picture of the tank from a back view?

67chevemall · 07-14-2009, 02:17 PM

yep cap the one. I got the fitting that goes to 3/8 hose and then to steel 3/8 line to the pump.

And you can mount the tank either way. There is plenty of fuel in the bowls to compensate for "take off"

Slick67 · 07-14-2009, 02:24 PM

Here ya go. Not to good but it should work. The left side is blocked off.

Name: fuelcellhanging.jpg
Views: 316
Size: 41.3 KB

71tahoe · 07-14-2009, 02:59 PM

Any straps going on top? That thing will be pinched between the bed crossmember and the lower straps but a little more security/peace of mind might be good.

**michael bustamante** · 07-14-2009, 03:11 PM

have any of you mounted the aluminum summit tanks with the baffle and such, in this same location? (under the bad)

Slick67 · 07-14-2009, 03:17 PM

Quote:

Originally Posted by 71tahoe

Any straps going on top? That thing will be pinched between the bed crossmember and the lower straps but a little more security/peace of mind might be good.

Yep, straps are going across the top. I will be able to bolt from the top or the bottom of the crossmember.

07SSSC · 07-15-2009, 10:13 AM

I think I've got a plan. -8 90* fitting out of the cell to a -6 reducer to a <3' piece of braided AN hose then to a 3/8" barb and rubber fuel hose. The main reason I want to use the braided line is for looks, plus I figured it would be more resistant to anything getting kicked up. I'll put a filter in the 3/8" rubber hose before going to 3/8" tubing and run that all the way up with another small piece of rubber hose going to the pump.

Thanks for all the help, I'll be sure to post up my progress once I get goin on it here in a couple months.

**michael bustamante** · 07-15-2009, 11:21 AM

if youre using a mechanical pump you`ll want to mount the filter after the pump not before, when the filter before the pump gets clogged the pump works harder to get fuel prematurely wearing out the pump, and possably collapsing your rubber lines

07SSSC · 07-15-2009, 01:22 PM

Quote:

Originally Posted by michael bustamante

if youre using a mechanical pump you`ll want to mount the filter after the pump not before, when the filter before the pump gets clogged the pump works harder to get fuel prematurely wearing out the pump, and possably collapsing your rubber lines

I've heard that before, problem is, I have a braided AN hose running from the pump to the carb. No where else to really put the filter. Right now it's sitting dang near on the pump with a nice little loop in the hose.

ap2002 · 10-28-2009, 11:41 PM

so does this summit fuel cell come with a sending unit that will work with a 71 c10?

67chevemall · 10-30-2009, 09:45 AM

Quote:

Originally Posted by ap2002

so does this summit fuel cell come with a sending unit that will work with a 71 c10?

Oh ya. Great deal for a tank at $150

oldblue1968chevy · 10-30-2009, 02:19 PM

can i mount it with my bed on?

kelsfine69 · 10-30-2009, 03:06 PM

Quote:

Originally Posted by Slick67

Yep, they fit pretty good too. Just a little trimming on the right rear crossrail.
Attachment 478496

Why is it crooked? Are the frame braces not square?

VA72C10 · 11-04-2009, 06:52 PM

Quote:

Originally Posted by kelsfine69

Why is it crooked? Are the frame braces not square?

yes, they are crooked from the factory. so that area needs to be trimmed to fit the cell...

07-13-2009, 03:23 PM	#1
07SSSC Registered User Join Date: Apr 2009 Location: Buhl, ID Posts: 288	Another fuel cell question Summit fuel cells. I know it's been covered a million times, but I never came across a part number that everyone was using. I'm thinking it would be a good idear to order one that'll fit and seeing as how so many have gone this route maybe someone could chime in? My main priority/project is getting the tank moved soon. __________________ '69 Chevy C/10-under reconstruction -- '68 C20 Camper 50th Anniversary-runs, but sorely needs a resto -- '07 Cobalt SS/SC-very fun DD -- '93 Chevy K2500-LQ4/4L80E swap -- '84 Trans Am-awaiting (LS) drivetrain -- '00 Trans Am-road tripper -- '06 Z06-577 WHP beast

07-13-2009, 08:37 PM	#2
07SSSC Registered User Join Date: Apr 2009 Location: Buhl, ID Posts: 288	Re: Another fuel cell question ttt anyone? __________________ '69 Chevy C/10-under reconstruction -- '68 C20 Camper 50th Anniversary-runs, but sorely needs a resto -- '07 Cobalt SS/SC-very fun DD -- '93 Chevy K2500-LQ4/4L80E swap -- '84 Trans Am-awaiting (LS) drivetrain -- '00 Trans Am-road tripper -- '06 Z06-577 WHP beast

07-14-2009, 11:14 AM	#3
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Another fuel cell question I just put the 16gal under my bed. Get the one with the foam and sensor or you'll regret it.... __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

07-14-2009, 11:16 AM	#4
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Another fuel cell question http://www.summitracing.com/parts/SUM-290108/ __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

07-14-2009, 11:31 AM	#5
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Another fuel cell question Yep, they fit pretty good too. Just a little trimming on the right rear crossrail. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

07-14-2009, 11:45 AM	#6
07SSSC Registered User Join Date: Apr 2009 Location: Buhl, ID Posts: 288	Re: Another fuel cell question Thanks guys, so what are you using to mount them? __________________ '69 Chevy C/10-under reconstruction -- '68 C20 Camper 50th Anniversary-runs, but sorely needs a resto -- '07 Cobalt SS/SC-very fun DD -- '93 Chevy K2500-LQ4/4L80E swap -- '84 Trans Am-awaiting (LS) drivetrain -- '00 Trans Am-road tripper -- '06 Z06-577 WHP beast

07-14-2009, 11:51 AM	#7
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Another fuel cell question http://www.summitracing.com/parts/SUM-290154/ And four self tappn clading screws __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

07-14-2009, 11:54 AM	#8
07SSSC Registered User Join Date: Apr 2009 Location: Buhl, ID Posts: 288	Re: Another fuel cell question Perfect, that'll definitely be my next purchase. __________________ '69 Chevy C/10-under reconstruction -- '68 C20 Camper 50th Anniversary-runs, but sorely needs a resto -- '07 Cobalt SS/SC-very fun DD -- '93 Chevy K2500-LQ4/4L80E swap -- '84 Trans Am-awaiting (LS) drivetrain -- '00 Trans Am-road tripper -- '06 Z06-577 WHP beast

07-14-2009, 12:22 PM	#9
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Another fuel cell question You will have to "fill up" through the bed floor, but trap doors are easy to find. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

07-14-2009, 01:47 PM	#10
07SSSC Registered User Join Date: Apr 2009 Location: Buhl, ID Posts: 288	Re: Another fuel cell question So did you guys run -8 all the way up, I'm thinking that's awfully big and -6 is probably more then enough plus it seems to be much more common. Anyone running from the cell to a hard line? Oh, and did you just cap off the return line if it wasn't needed? __________________ '69 Chevy C/10-under reconstruction -- '68 C20 Camper 50th Anniversary-runs, but sorely needs a resto -- '07 Cobalt SS/SC-very fun DD -- '93 Chevy K2500-LQ4/4L80E swap -- '84 Trans Am-awaiting (LS) drivetrain -- '00 Trans Am-road tripper -- '06 Z06-577 WHP beast Last edited by 07SSSC; 07-14-2009 at 01:49 PM.

07-14-2009, 02:03 PM	#11
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Another fuel cell question Not to that point as of yet. Still working on the body. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

07-14-2009, 02:13 PM	#12
68fixeruper Registered User Join Date: Apr 2006 Location: Amarillo, Tx Posts: 267	Re: Another fuel cell question ya -8 seems huge slick 67 do u have a picture of the tank from a back view?

07-14-2009, 02:17 PM	#13
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Another fuel cell question yep cap the one. I got the fitting that goes to 3/8 hose and then to steel 3/8 line to the pump. And you can mount the tank either way. There is plenty of fuel in the bowls to compensate for "take off" __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

07-14-2009, 02:24 PM	#14
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Another fuel cell question Here ya go. Not to good but it should work. The left side is blocked off. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

07-14-2009, 02:59 PM	#15
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Re: Another fuel cell question Any straps going on top? That thing will be pinched between the bed crossmember and the lower straps but a little more security/peace of mind might be good.



Register or Log In To remove these advertisements.

07-14-2009, 03:11 PM	#16
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Another fuel cell question have any of you mounted the aluminum summit tanks with the baffle and such, in this same location? (under the bad) __________________ 1967custom

07-15-2009, 10:13 AM	#18
07SSSC Registered User Join Date: Apr 2009 Location: Buhl, ID Posts: 288	Re: Another fuel cell question I think I've got a plan. -8 90* fitting out of the cell to a -6 reducer to a <3' piece of braided AN hose then to a 3/8" barb and rubber fuel hose. The main reason I want to use the braided line is for looks, plus I figured it would be more resistant to anything getting kicked up. I'll put a filter in the 3/8" rubber hose before going to 3/8" tubing and run that all the way up with another small piece of rubber hose going to the pump. Thanks for all the help, I'll be sure to post up my progress once I get goin on it here in a couple months. __________________ '69 Chevy C/10-under reconstruction -- '68 C20 Camper 50th Anniversary-runs, but sorely needs a resto -- '07 Cobalt SS/SC-very fun DD -- '93 Chevy K2500-LQ4/4L80E swap -- '84 Trans Am-awaiting (LS) drivetrain -- '00 Trans Am-road tripper -- '06 Z06-577 WHP beast

07-15-2009, 11:21 AM	#19
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Another fuel cell question if youre using a mechanical pump you`ll want to mount the filter after the pump not before, when the filter before the pump gets clogged the pump works harder to get fuel prematurely wearing out the pump, and possably collapsing your rubber lines __________________ 1967custom

10-28-2009, 11:41 PM	#21
ap2002 Registered User Join Date: Apr 2008 Location: Houston, TX Posts: 247	Re: Another fuel cell question so does this summit fuel cell come with a sending unit that will work with a 71 c10? __________________ 1971 C-10 SWB - LS swap w/4L60e, 20x8.5front 20x12rear, 1968 C-10 SWB - 454 BB TH350 -Gone!

10-30-2009, 02:19 PM	#23
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Another fuel cell question can i mount it with my bed on? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.