front end questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Myself · 07-26-2009, 09:27 PM

I'm working on a '70 C10 for a guy. He bought all new front end parts for it and wants them installed. The problem is, the truck has 5 lug and disc brakes. And, the motor mounts are a later style. I'm guessing it's a 73-up crossmember. So my question is will the front end parts work the same? Or does he need to take it all back and get later model stuff?

truckpoorpackrat · 07-26-2009, 09:39 PM

I think the -72 front end had steel threaded pivots on the upper & lower control arms & 73- were rubber/urethane. I am sure if i am wrong someone else will speak up. James

71tahoe · 07-26-2009, 09:48 PM

I think that's right. Should be a way to tell. I think if he walked up to the counter and asked for parts for a 70 then having a 5lug makes all that stuff useless.

Myself · 07-27-2009, 04:34 PM

How about the steering components? Center ling, tie rod ends, ball joints, etc.

**john** · 07-27-2009, 04:53 PM

Quote:

Originally Posted by Myself

How about the steering components? Center ling, tie rod ends, ball joints, etc.

These parts are all different between drum and disc.

07-26-2009, 09:27 PM	#1
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,142	front end questions I'm working on a '70 C10 for a guy. He bought all new front end parts for it and wants them installed. The problem is, the truck has 5 lug and disc brakes. And, the motor mounts are a later style. I'm guessing it's a 73-up crossmember. So my question is will the front end parts work the same? Or does he need to take it all back and get later model stuff?

07-26-2009, 09:39 PM	#2
truckpoorpackrat Registered User Join Date: Dec 2008 Location: joplin mo. Posts: 272	Re: front end questions I think the -72 front end had steel threaded pivots on the upper & lower control arms & 73- were rubber/urethane. I am sure if i am wrong someone else will speak up. James

07-26-2009, 09:48 PM	#3
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Re: front end questions I think that's right. Should be a way to tell. I think if he walked up to the counter and asked for parts for a 70 then having a 5lug makes all that stuff useless.

07-27-2009, 04:34 PM	#4
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,142	Re: front end questions How about the steering components? Center ling, tie rod ends, ball joints, etc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.