![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2009
Location: Normal, IL
Posts: 138
|
trying to install Yearone radio...
I've looked through tons of posts and kind find anywhere that anyone talks about removing the ashtray receiver...I removed the ashtray, but the piece that it slides into doesn't allow me to remove the old radio...can someone HELP?????
Thanks, Slate |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2006
Location: Take Off
Posts: 1,908
|
Re: trying to install Yearone radio...
Is it spot welded to the dash?
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2009
Location: Normal, IL
Posts: 138
|
Re: trying to install Yearone radio...
I'm thinking that it might be since I can't find any screws, etc. But wanted to see what you guys thought before I started popping stuff loose...but I can't get the old radio out
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Nov 2007
Location: New Blaine, Arkansas
Posts: 751
|
Re: trying to install Yearone radio...
Pull your glovebox and the radio will come out thru there.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2009
Location: Normal, IL
Posts: 138
|
Re: trying to install Yearone radio...
Ok, I'll try the glovebox....Thanks guys
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2006
Location: Take Off
Posts: 1,908
|
Re: trying to install Yearone radio...
|
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Nov 2007
Location: New Blaine, Arkansas
Posts: 751
|
Re: trying to install Yearone radio...
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2009
Location: Normal, IL
Posts: 138
|
Re: trying to install Yearone radio...
Ended up, diconnecting the hoses to the defrosters, and slid it to passenger side, then out...so I didn't even have to remove the glovebox...
NOW I have another problem, PO had a wire running from + terminal on coil to radio, and was spliced in a couple differnt places with other wires...took that wire out and wired radio to fuse box...radio works great, but when I try to start the truck it dies as soon as you let the key pop back to "run" Where should that + terminal coil wire go to? |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2009
Location: Normal, IL
Posts: 138
|
Re: trying to install Yearone radio...
I ended up running that wire from the + terminal of the coil to the "run" side of the ignition, and all is well again...Gus is running, and singing his tunes now.
Thanks guys, |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|