198Plus build - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aggie91 · 08-06-2009, 07:48 AM

198PLUS - when your powder coater did the springs, did he extend the spring while it was being coated? If not they might have the coils stuck together and will chip off the coating when installed and extended. I know, it happend to me on one of my old projects...

Parts look good. Is that a semi gloss black? Alan is doing a great jobon your truck.

198plus · 08-06-2009, 08:09 AM

He extends them.

Quote:

Originally Posted by aggie91

198PLUS - when your powder coater did the springs, did he extend the spring while it was being coated? If not they might have the coils stuck together and will chip off the coating when installed and extended. I know, it happend to me on one of my old projects...

Parts look good. Is that a semi gloss black? Alan is doing a great jobon your truck.

Alan's Classic · 08-06-2009, 09:59 AM

Quote:

Originally Posted by 198plus

Got a few parts back from powder coating......

Nice!!

Quote:

Originally Posted by jsmithbm

SWEET! getting closer every day. i know 198 is getting excited.
Sad thing about the porter, They've got an opening for a body man down here, heck he'd fit in here, they cant do body work either!!! ahahaha

Quote:

Originally Posted by 4dranch

As always Alan, real nice work. Moving right along.....is the wire wheel on your angle grinder?

No it's not on a die grinder. It comes as one tool. It's great for removeing seam sealer on late model cars. They are pricey. I don't even have one. This was a fellow bodyman's. He just let me try it.

Strodder · 08-06-2009, 11:49 AM

On that frame I did I used a 4 1/2" grinder with a twisted wire wheel on it and it took it down to bare metal in no time. Much faster than sand blasting. I got into the places that the wire wheel couldn't get with the sand blaster. The only thing with the wire wheel is the wire breaks off and sticks in you you every ware. I looked like a fricken porcupine. And bleeding out of all the holes it made.

That only happens when the wheel is getting too worn. I try to get the most out of it as I can.

70 Suburban · 08-06-2009, 12:00 PM

I CANT IMAGINE THAT A WIRE WHEEL WOULD BE THAT MUCH FASTER THAN SAND BLASTING. i DID A LONG BED, BED IN ABOUT 2-3 HRS INSIDE AND OUT TO BARE STEEL.

Strodder · 08-06-2009, 12:24 PM

Quote:

Originally Posted by 70 Suburban

I CANT IMAGINE THAT A WIRE WHEEL WOULD BE THAT MUCH FASTER THAN SAND BLASTING. i DID A LONG BED, BED IN ABOUT 2-3 HRS INSIDE AND OUT TO BARE STEEL.

On a really dirty, painted over rusted frame it was faster for me. Clean up sift and reload took as long as the blasting. Plus it was very messy. On a lot of sheet metal, like the cab, or bed I rather have it blasted by a shop. The guy I use out here is very reasonable. The 46 Ford Sedan I had blasted only cost me $550.00 and he did underneath, inside and out the 4 fenders, body, and hood. It would have taken me a long time, and a big mess. While the body was out being blasted I was getting work done on the frame. Then I had that blasted, and powder coated along with a whole bunch of front end and frame parts. That was $550.00 also. It was well worth it, I think.
Besides that you don't have to yell.

This is before.

This is after, and I sprayed etching/sealer primer on it right away.

And here's the frame after I put it together. Let me tell you it was well worth the $1,100.00 to get it all sand blasted and power coated. Besides the customer paid for it, and I made a $200 profit. I charged him $1,300.00 and he was very happy with the results.

I'm not trying to show off my work. I just wanted to show what a difference it is to get it done by a professional sand blasting / powder coating shop. For me it was a good idea, but not for everybody. Time is money, and I keeped busy while it was getting done.

Strodder · 08-06-2009, 12:45 PM

Sorry for the long post.

MacAttack · 08-06-2009, 12:46 PM

Quote:

Originally Posted by Strodder

Sorry for the long post.

Don't be sorry - we're digg'en this chit!

Strodder · 08-06-2009, 12:48 PM

Quote:

Originally Posted by MacAttack

Don't be sorry - we're digg'en this chit!

Thanks, but are you calling my work chit?

MacAttack · 08-06-2009, 12:59 PM

Quote:

Originally Posted by Strodder

Thanks, but are you calling my work chit?

Yeah, but it's cool chit.

Strodder · 08-06-2009, 01:01 PM

Quote:

Originally Posted by MacAttack

Yeah, but it's cool chit.

Thanks again. This time I mean it.

1964C10 · 08-09-2009, 11:20 AM

Nice work Alan! I have been away for a number of weeks from the board, so I am catching up on all your work. Now I just need to figure out how to make my parts look like your parts hahaha (not a chance)

jsmithbm · 08-13-2009, 07:28 PM

Last post on the 9th !!!! What the hell is my month subscription for. I expect results every day!!!!! Just kiddin, I'll be coming up that way next weekend. Going to get that other stuff from Shannon. I'll be sure to call ahead. Great progress..... Hope the family and new pup is doing well

198plus · 08-13-2009, 09:30 PM

It's not Alan's fought......It's mine I'm broke !!!!! My wife cut down my money tree

But she didn't know I had another planted

Quote:

Originally Posted by jsmithbm

Last post on the 9th !!!! What the hell is my month subscription for. I expect results every day!!!!! Just kiddin, I'll be coming up that way next weekend. Going to get that other stuff from Shannon. I'll be sure to call ahead. Great progress..... Hope the family and new pup is doing well

Strodder · 08-13-2009, 09:33 PM

Quote:

Originally Posted by 198plus

It's not Alan's fought......It's mine I'm broke !!!!! My wife cut down my money tree

But she didn't know I had another planted

I had a customer like you, but he didn't have another money tree.

His wife had his 46 Ford towed home.

jsmithbm · 08-13-2009, 09:41 PM

Quote:

Originally Posted by 198plus

It's not Alan's fought......It's mine I'm broke !!!!! My wife cut down my money tree

But she didn't know I had another planted

Yea i saw that post a while back, Is it harvest season yet. LOL. Well these things take a while. Helps you appreciate it i guess. Well its looking good.

198plus · 08-13-2009, 09:52 PM

It's called miracle grow

Quote:

Originally Posted by jsmithbm

Is it harvest season yet. LOL

Strodder · 08-13-2009, 10:00 PM

Quote:

Originally Posted by 198plus

It's called miracle grow

Some people should put that on there head.

198plus · 08-24-2009, 11:48 PM

Finally got my doors back today.........New door skins and no more rust in inner bottoms

Heres some cell phone pics.

I had a lot of fun hanging them by myself

Strodder · 08-25-2009, 11:00 AM

Nice job.

jason65 · 08-25-2009, 01:10 PM

Looks good 198+.

kizer · 08-25-2009, 07:16 PM

Yeah no kidding those do look nice. I guess my door do stand a chance.

198plus · 08-25-2009, 09:16 PM

Thanks everyone.......I thought they turned out nice also , considering what I started with.

Quote:

Originally Posted by Strodder

Nice job.

Quote:

Originally Posted by jason65

Looks good 198+.

Quote:

Originally Posted by kizer

Yeah no kidding those do look nice. I guess my door do stand a chance.

ruffrida2005 · 08-25-2009, 09:59 PM

who did you have skin them?

198plus · 08-25-2009, 10:55 PM

Friend of mine Jeramie Black.

Quote:

Originally Posted by ruffrida2005

who did you have skin them?

08-06-2009, 07:48 AM	#451
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 198Plus build by Alan's Classic 198PLUS - when your powder coater did the springs, did he extend the spring while it was being coated? If not they might have the coils stuck together and will chip off the coating when installed and extended. I know, it happend to me on one of my old projects... Parts look good. Is that a semi gloss black? Alan is doing a great jobon your truck. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

08-06-2009, 11:49 AM	#454
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 198Plus build by Alan's Classic On that frame I did I used a 4 1/2" grinder with a twisted wire wheel on it and it took it down to bare metal in no time. Much faster than sand blasting. I got into the places that the wire wheel couldn't get with the sand blaster. The only thing with the wire wheel is the wire breaks off and sticks in you you every ware. I looked like a fricken porcupine. And bleeding out of all the holes it made. That only happens when the wheel is getting too worn. I try to get the most out of it as I can. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-06-2009, 12:00 PM	#455
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: 198Plus build by Alan's Classic I CANT IMAGINE THAT A WIRE WHEEL WOULD BE THAT MUCH FASTER THAN SAND BLASTING. i DID A LONG BED, BED IN ABOUT 2-3 HRS INSIDE AND OUT TO BARE STEEL. __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

08-06-2009, 12:45 PM	#457
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 198Plus build by Alan's Classic Sorry for the long post. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-09-2009, 11:20 AM	#462
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: 198Plus build by Alan's Classic Nice work Alan! I have been away for a number of weeks from the board, so I am catching up on all your work. Now I just need to figure out how to make my parts look like your parts hahaha (not a chance) __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

08-13-2009, 07:28 PM	#463
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: 198Plus build by Alan's Classic Last post on the 9th !!!! What the hell is my month subscription for. I expect results every day!!!!! Just kiddin, I'll be coming up that way next weekend. Going to get that other stuff from Shannon. I'll be sure to call ahead. Great progress..... Hope the family and new pup is doing well __________________ Learning as I go! -------------------------------------

08-24-2009, 11:48 PM	#469
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: 198Plus build by Alan's Classic Finally got my doors back today.........New door skins and no more rust in inner bottoms Heres some cell phone pics. I had a lot of fun hanging them by myself

08-25-2009, 11:00 AM	#470
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 198Plus build by Alan's Classic Nice job. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-25-2009, 01:10 PM	#471
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 198Plus build by Alan's Classic Looks good 198+.

08-25-2009, 07:16 PM	#472
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: 198Plus build by Alan's Classic Yeah no kidding those do look nice. I guess my door do stand a chance. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

08-25-2009, 09:59 PM	#474
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 198Plus build by Alan's Classic who did you have skin them? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.