You Got To See This Baby 850h.p. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*rage'nrat638* · 04-03-2003, 10:10 PM

DART638C.I. 4.75 INCH STROKE CALLIES CRANK 718/729 LIFT
CANFIELD 355 ALUM.HEADS 91 OCTAINE PUMP GAS...850H.P.8200RPM.

*rage'nrat638* · 04-03-2003, 10:12 PM

ANOTHER

lngbed71 · 04-03-2003, 10:12 PM

whew..........

*rage'nrat638* · 04-03-2003, 10:13 PM

ANOTHER

*rage'nrat638* · 04-03-2003, 10:14 PM

ANOTHER

*rage'nrat638* · 04-03-2003, 10:16 PM

ANOTHER

GMC71k20 · 04-03-2003, 10:17 PM

its a thing of beauty

Class of 69 · 04-03-2003, 10:22 PM

Your gonna hafta put the old motor in the back for traction!!! I see biiiiiiig wheel tubs, and 15 inch tires on the horizon. If that thing ever hooks up, your gonna pass out from the G's. I am sooooo jealous, been 22 years since I stuck my foot in a fat rats ass.

*rage'nrat638* · 04-03-2003, 10:40 PM

YOU ASKED FOR IT

*rage'nrat638* · 04-03-2003, 10:43 PM

TUBS

lngbed71 · 04-03-2003, 10:43 PM

I know this doesn't belong here, but I couldn't help showing this bigun for a motor.......

shortbed70 · 04-03-2003, 10:50 PM

Alls I can say is CHA-CCHINNGG. How much to build?

*rage'nrat638* · 04-03-2003, 10:58 PM

$15.000 FOR THE ENGINE----$5000.00 FOR TRANS AND MSD PRODUCTS , GAUGES TO KEEP A EYE ON IT ....AND ONE THREE PACK. OF UNDIES TAPED TO THE DASH JUST IN CASE

MISC. OTHER PARTS.----OUCH

krue · 04-04-2003, 01:07 AM

That thing is FINE!!!!

ONce again my truck just turned green with envy!!!

Hooter · 04-04-2003, 01:31 AM

what else can I say Im speechless!!
its so good i think I gonna hurl

*rage'nrat638* · 04-04-2003, 02:42 AM

800 HP and up

Chevy Block
639 All CrateEngine.net short blocks consist of Block, Crankshaft, Connecting Rods, Pistons, Piston Rings, Main & Rod Bearings, Cam Bearings, and come fully balanced and assembled. Other services included with the DART #31263454 10.200 Deck Steel Main Caps are:
(Substitutions OK. Please call Sales at 603-378-0090)

Main Lines Checked
Block Magnafluxed
Sonic Tested for Core Shift
Bored and Honed with Torque Plates
Brass Freeze Plugs Installed
Cam Bearings Installed

--------------------------------------------------------------------------------

Short Block Components Include:
Price: $6899
Click on component to view picture

Chevy DART Block
$6899 Block: New Dart Big M 10.200" ST Deck Block w/4.625 Bore (#081103)
Crankshaft: 4.750 Callies Crank
Connecting Rods: Oliver Billet Rods 6.700 Long.
Bearings: Clevite P-Series Performance Race Bearings, Clevite Performance
Cam Bearings
Pistons: Custom Pistons - Any compression.
Dome, Dish or Custom Pistons available for additional fee.
Piston Rings: Speed-Pro/JE Plasma Moly Piston Rings 1/16 x 1/16 x 3/16.

--------------------------------------------------------------------------------

Optional Additions Installed Include:

Cam Kits - Manley High Performance True Roller Timing Set with:
Custom Schneider Hardened Steel Billet Hydraulic or Solid Cam
Dyno-Designed for
Stroker Applications. Add...... $275
Custom Schneider Hardened Steel Billet Roller Cam Dyno-Designed for
Stroker Applications. Add...... $359

Stef's Aluminum Pan Kit
$899 Oil Pan Kits include
Melling HV Oil Pump
Chrome Moly High Performance Oil Pump Shaft
High Performance Oil Pan Gasket

With Custom Stef's Aluminum Pan
Add... $899
Please note: Some Pans may not fit Stroker Applications

Brodix BB5 Add $2999

AFR Head Add $3300

Dart "Big M" Add $3300
Head Kits
Fel-Pro Performance Head Gaskets
ARP Head Stud Kit
Aluminum Roller Rockers
Chrome Moly 5/16 Diameter Pushrods
Hydraulic or Solid Lifters (Schneider Roller Lifters available for an addt'l $299)

Your choice of:

BRODIX "BB5" 387cc, 2.350x1.900
Add... $2999
AFR Heads:
357cc, CNC Ported Head, 2.300 + 1.880 valves
Add... $3300

Dart Aluminum "Big M":
410cc, with 2.350x1.88 valves
Add... $3300

Other Heads are available. Please call Sales at: (603) 378-0090

__________________

krazy_texan · 04-04-2003, 03:22 AM

man that picture of that shelby reminds me of the Falcon that i used to have with a 428 in it, now to drive that car you had to have some serious balls.

stelth2002 · 04-04-2003, 04:35 AM

WOW, hope it makes it to 8200 for all your 800 HP. I need that in a chevelle with twin turbos... even more

Class of 69 · 04-04-2003, 09:20 AM

I'd have to win a lottery to even think about building something that nice!! Does it have a chute to haul it down again? How many radar jammers on the dash?? I don't think I can look at any more of your pics...it hurts too much.

*Randy70C-10* · 04-04-2003, 10:07 AM

Sweet engine! You could free another couple of horsepower with an electric water pump.

rigo · 04-04-2003, 10:35 AM

WOW!......that's sweet!

-Greg72 · 04-04-2003, 11:34 AM

I'm completely aroused right now!!!

I checked out the links to your website.....you REALLY need to post up a couple small .AVIs or .MPGs so we can hear what that bad boy SOUNDS like!!!!!

Totally freaking awesome.

**COBALT** · 04-04-2003, 12:12 PM

DROOOOOL.......

That + Built Up TH400 w/ overdrive + Custom 1 pc. Drive Shaft + Aftermarket Dana 60 w/ 3.73 = Happy COBALT

**1971Stepside** · 04-04-2003, 12:35 PM

Sweet engine....what color red did you paint the block? I want to paint mine red. Can't wait to see it in the frame....

blazer boy · 04-04-2003, 01:16 PM

i shure wish i had a truck like this it kind of reminds me of my grimlin its real fas it ran a 23 sec 1/8 it has a 4cyl fat block blower charger turbo it bad

04-03-2003, 10:10 PM	#1
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	You Got To See This Baby 850h.p. DART638C.I. 4.75 INCH STROKE CALLIES CRANK 718/729 LIFT CANFIELD 355 ALUM.HEADS 91 OCTAINE PUMP GAS...850H.P.8200RPM. Last edited by rage'nrat638; 04-04-2003 at 06:41 PM.

04-03-2003, 10:22 PM	#8
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	Your gonna hafta put the old motor in the back for traction!!! I see biiiiiiig wheel tubs, and 15 inch tires on the horizon. If that thing ever hooks up, your gonna pass out from the G's. I am sooooo jealous, been 22 years since I stuck my foot in a fat rats ass. __________________ 69 GMC K10 ..some restoration required....still..

04-03-2003, 10:43 PM	#11
lngbed71 Nothing fits but the oil Join Date: Mar 2003 Location: Gaston, Indiana Posts: 424	I know this doesn't belong here, but I couldn't help showing this bigun for a motor....... Attached Images __________________ Land of the free Because of the brave

04-03-2003, 10:50 PM	#12
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Alls I can say is CHA-CCHINNGG. How much to build? __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-04-2003, 01:07 AM	#14
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	That thing is FINE!!!! ONce again my truck just turned green with envy!!! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

04-03-2003, 10:12 PM	#2
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	ANOTHER

04-03-2003, 10:12 PM	#3
lngbed71 Nothing fits but the oil Join Date: Mar 2003 Location: Gaston, Indiana Posts: 424	whew.......... __________________ Land of the free Because of the brave

04-03-2003, 10:13 PM	#4
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	ANOTHER

04-03-2003, 10:14 PM	#5
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	ANOTHER

04-03-2003, 10:16 PM	#6
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	ANOTHER

04-03-2003, 10:17 PM	#7
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	its a thing of beauty

04-03-2003, 10:40 PM	#9
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	YOU ASKED FOR IT

04-03-2003, 10:58 PM	#13
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	$15.000 FOR THE ENGINE----$5000.00 FOR TRANS AND MSD PRODUCTS , GAUGES TO KEEP A EYE ON IT ....AND ONE THREE PACK. OF UNDIES TAPED TO THE DASH JUST IN CASE MISC. OTHER PARTS.----OUCH

04-04-2003, 01:31 AM	#15
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	what else can I say Im speechless!! its so good i think I gonna hurl __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

04-04-2003, 02:42 AM	#16
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	INFO 800 HP and up Chevy Block 639 All CrateEngine.net short blocks consist of Block, Crankshaft, Connecting Rods, Pistons, Piston Rings, Main & Rod Bearings, Cam Bearings, and come fully balanced and assembled. Other services included with the DART #31263454 10.200 Deck Steel Main Caps are: (Substitutions OK. Please call Sales at 603-378-0090) Main Lines Checked Block Magnafluxed Sonic Tested for Core Shift Bored and Honed with Torque Plates Brass Freeze Plugs Installed Cam Bearings Installed -------------------------------------------------------------------------------- Short Block Components Include: Price: $6899 Click on component to view picture Chevy DART Block $6899 Block: New Dart Big M 10.200" ST Deck Block w/4.625 Bore (#081103) Crankshaft: 4.750 Callies Crank Connecting Rods: Oliver Billet Rods 6.700 Long. Bearings: Clevite P-Series Performance Race Bearings, Clevite Performance Cam Bearings Pistons: Custom Pistons - Any compression. Dome, Dish or Custom Pistons available for additional fee. Piston Rings: Speed-Pro/JE Plasma Moly Piston Rings 1/16 x 1/16 x 3/16. -------------------------------------------------------------------------------- Optional Additions Installed Include: Cam Kits - Manley High Performance True Roller Timing Set with: Custom Schneider Hardened Steel Billet Hydraulic or Solid Cam Dyno-Designed for Stroker Applications. Add...... $275 Custom Schneider Hardened Steel Billet Roller Cam Dyno-Designed for Stroker Applications. Add...... $359 Stef's Aluminum Pan Kit $899 Oil Pan Kits include Melling HV Oil Pump Chrome Moly High Performance Oil Pump Shaft High Performance Oil Pan Gasket With Custom Stef's Aluminum Pan Add... $899 Please note: Some Pans may not fit Stroker Applications Brodix BB5 Add $2999 AFR Head Add $3300 Dart "Big M" Add $3300 Head Kits Fel-Pro Performance Head Gaskets ARP Head Stud Kit Aluminum Roller Rockers Chrome Moly 5/16 Diameter Pushrods Hydraulic or Solid Lifters (Schneider Roller Lifters available for an addt'l $299) Your choice of: BRODIX "BB5" 387cc, 2.350x1.900 Add... $2999 AFR Heads: 357cc, CNC Ported Head, 2.300 + 1.880 valves Add... $3300 Dart Aluminum "Big M": 410cc, with 2.350x1.88 valves Add... $3300 Other Heads are available. Please call Sales at: (603) 378-0090 __________________



Register or Log In To remove these advertisements.

04-04-2003, 03:22 AM	#17
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	man that picture of that shelby reminds me of the Falcon that i used to have with a 428 in it, now to drive that car you had to have some serious balls. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

04-04-2003, 04:35 AM	#18
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	WOW, hope it makes it to 8200 for all your 800 HP. I need that in a chevelle with twin turbos... even more __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

04-04-2003, 09:20 AM	#19
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	I'd have to win a lottery to even think about building something that nice!! Does it have a chute to haul it down again? How many radar jammers on the dash?? I don't think I can look at any more of your pics...it hurts too much. __________________ 69 GMC K10 ..some restoration required....still..

04-04-2003, 10:07 AM	#20
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Sweet engine! You could free another couple of horsepower with an electric water pump.

04-04-2003, 10:35 AM	#21
rigo Flake Daddy Join Date: Jan 2003 Location: Plainview TEXAS Posts: 456	WOW!......that's sweet! __________________ 1968 SWB Fleet Daily Driver 350/TH400 shaved driprail,emblems,tailgate,air ride suspension 1964 Pontiac Catalina 2dr. hardtop shaved everything, air ride suspension 1998 Range Rover 1960 El Camino....in the works.....

04-04-2003, 11:34 AM	#22
-Greg72 Registered User Join Date: Nov 2001 Location: Austin, TX Posts: 308	I'm completely aroused right now!!! I checked out the links to your website.....you REALLY need to post up a couple small .AVIs or .MPGs so we can hear what that bad boy SOUNDS like!!!!! Totally freaking awesome.

04-04-2003, 12:12 PM	#23
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	DROOOOOL....... That + Built Up TH400 w/ overdrive + Custom 1 pc. Drive Shaft + Aftermarket Dana 60 w/ 3.73 = Happy COBALT __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

04-04-2003, 12:35 PM	#24
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Sweet engine....what color red did you paint the block? I want to paint mine red. Can't wait to see it in the frame.... __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

04-04-2003, 01:16 PM	#25
blazer boy Registered User Join Date: Feb 2001 Location: derby ks usa Posts: 115	balls itch i shure wish i had a truck like this it kind of reminds me of my grimlin its real fas it ran a 23 sec 1/8 it has a 4cyl fat block blower charger turbo it bad

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.