04-04-2003, 11:45 PM | #1 |
Registered User
Join Date: Jun 2001
Location: Springfield, MO
Posts: 1,098
|
Air Cleaner Gasket
I bought a new chrome Edelbrock Air Cleaner Assembly to go along with my new K&N Filter. Should there be any kind of gasket that I should use?
__________________
Nick Rodenberg 72 Cheyenne 10 V8 350/TH350 white/ochre/white/ochre, ochre/saddle interior Retired and in the dry... still runs. I now drive Red '01 Ford Focus... better MPG!!! |
04-05-2003, 08:30 AM | #2 |
Registered User
Join Date: Jun 2001
Location: Springfield, MO
Posts: 1,098
|
I would still like my question answered even though I have to go back and get a different air cleaner. THe one the guy gave me is to big for the filter... the cleaner is a 14" and the K&N is about an inch smaller.
__________________
Nick Rodenberg 72 Cheyenne 10 V8 350/TH350 white/ochre/white/ochre, ochre/saddle interior Retired and in the dry... still runs. I now drive Red '01 Ford Focus... better MPG!!! |
04-05-2003, 09:58 AM | #3 |
Registered User
Join Date: Mar 2003
Location: Stillwater MN
Posts: 1,166
|
There is a gasket between the air cleaner base, and the carb. Readily available at any parts store, or dealership.
__________________
69 GMC K10 ..some restoration required....still.. |
04-05-2003, 11:10 AM | #4 |
Registered User
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,449
|
Not Needed
Yea there is a gasket that goes there and can be had a t most auto store' but it is not really needed.Make sure it seals around the base the air cleaner nut will snug it down.
__________________
2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327 |
04-05-2003, 01:38 PM | #5 |
Senior Member
Join Date: Dec 2002
Location: Portland, Oregon
Posts: 901
|
I made a gasket using heavy gasket material. measured diameter; used a compass and made the gasket !!! Not a critical thing and easy to do !
__________________
'71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal). |
04-07-2003, 01:38 AM | #6 |
Registered User
Join Date: Jun 2001
Location: Springfield, MO
Posts: 1,098
|
Well I went back and they had neither a K&N to fit the Edelbrock 14" Assembly or an assembly to fit the filter. They didn't even have any air cleaner assemblys to fit any of their K&N's. So I went to another O' Reillys and got a Mr. Gasket 14" assembly and a 14" K&N
__________________
Nick Rodenberg 72 Cheyenne 10 V8 350/TH350 white/ochre/white/ochre, ochre/saddle interior Retired and in the dry... still runs. I now drive Red '01 Ford Focus... better MPG!!! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|