![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2009
Location: Newnan, GA
Posts: 485
|
Rusty Bolts
What are some technq.'s to remove stepside? Going to be taking them off this weekend. Wanna see if you guys have any tips i can use if i run into problems
__________________
![]() ![]() ------------------------------------- |
![]() |
![]() |
![]() |
#2 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Rusty Bolts
are you taking the bed off the frame or the fenders and steps off the bed?
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#3 |
Account Suspended
Join Date: Apr 2009
Location: Oklahoma City
Posts: 4,709
|
Re: Rusty Bolts
I like to use a sledge hammer for the bigger jobs.
If you can't fix it with a hammer then you have an electrical problem. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2009
Location: Newnan, GA
Posts: 485
|
Re: Rusty Bolts
I'm hopin to keep the bed on the frame.
__________________
![]() ![]() ------------------------------------- |
![]() |
![]() |
![]() |
#5 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Rusty Bolts
sometimes liquid penetrant will work. you may have to cut the 8 bolts that connect the bed to the frame off with an angle grinder.
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#6 |
Account Suspended
![]() Join Date: Nov 2008
Location: Prunedale California
Posts: 782
|
Re: Rusty Bolts
|
![]() |
![]() |
![]() |
#7 |
Account Suspended
Join Date: Jul 2006
Location: DFW
Posts: 1,427
|
Re: Rusty Bolts
Try tightening the nuts til the bolts shear...
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Jul 2004
Location: Estherville, Iowa
Posts: 3,371
|
Re: Rusty Bolts
If your are trying to remove bolts that go into a threaded hole on the other side and want to avoid twisting them off, get an acetylene torch on low-med heat and heat the heads red hot, doesn't take very long. Let it cool completely and they will spin right out with a ratchet. Note, propane or mapp gas torch will not work, not hot enough.
__________________
1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jun 2009
Location: Newnan, GA
Posts: 485
|
Re: Rusty Bolts
well darn i was going to use the MAPP gas torch too. I guess i will use that for fixing the oil canning on the top side of the fenders. I think i will just cut em off.
__________________
![]() ![]() ------------------------------------- |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|