![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
![]()
Gang,
sorry for yet another speed warning question! Since my speedo head was damaged, I almost have everything to repair it back to pre-clumsy-carpetlayer brilliance. (long story) anyway, I have to replace a few more gear cogs behind the speedo head. could someone who has a loose speed warning speedo head look at something?? pleeeeeez? I need to know the amount of teeth on the 2 small cogs I have listed in the below pic. I have found raw plastic gears, but I want to verify the amount teeth in these cogs. they should be the same. ![]() with the help of Joe (joesjunk) and jaros44sr, I was able to locate 1 of the impossible to find cogs already. these two guys are great! rep points if I could.... and Joe is someone I can defintely hang out with! talk about knowledge and a cool basement!!!
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#2 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Another (Sorry) Speed Warning Question
just a thought.... does anyone have a factory assembly manual for speedometers? or is this type of assembly manual that was exclusive to the many sub contractor companies that produced sub assemblies for GM. (like Delco with GM electronic sub assemblies.)
Andy, any thoughts??
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#3 |
LET'S GO RACIN'
![]() Join Date: Oct 2007
Location: SALINA,KS
Posts: 1,212
|
Re: Another (Sorry) Speed Warning Question
Derek(nephew) has the blue book. I can look tomorrow for ya.
Maybe we need to have a meet at Joe's place?
__________________
Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY ![]() Rip El Jay RIP BOBBO'S MOM |
![]() |
![]() |
![]() |
#4 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Another (Sorry) Speed Warning Question
he has enough parking space! I'm jealous!!
thanks for looking Daren. maybe we'll get lucky and something will be in there.
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#5 |
LET'S GO RACIN'
![]() Join Date: Oct 2007
Location: SALINA,KS
Posts: 1,212
|
Re: Another (Sorry) Speed Warning Question
Sorry Doug, but they said they didn't see anything in the book.
__________________
Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY ![]() Rip El Jay RIP BOBBO'S MOM |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: May 2001
Location: Independence MO.
Posts: 7,697
|
Re: Another (Sorry) Speed Warning Question
Im glad you got some use out of that thing!! It was good chatting with ya on saturday!! I can sure talk though
![]()
__________________
72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale |
![]() |
![]() |
![]() |
#7 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Another (Sorry) Speed Warning Question
Joe, I'll have to give you a call next time I'm out that way. great hanging out talking trucks......
update: the carpet company's customer service guy is coming out tomorrow. now get this. he owns a 72 Super! and knows these rigs quite well. AND he was at a show I was at a week ago and took 2nd on his Cheyenne! at least he may understand the rarity of the speedometer. keeping my fingers crossed......
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#8 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Another (Sorry) Speed Warning Question
Does any of these look like they would work. I have a couple of old speedo with the warning in them. These are parts left over form building mine for the 71.
I will try and look tomorrow for you I have all the gears I'm pretty sure of.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 09-21-2009 at 09:30 PM. |
![]() |
![]() |
![]() |
#9 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Another (Sorry) Speed Warning Question
Andy,
you could be a lifesaver. thanks for looking. I need the two cogs/gears that are 0.30" diameter with a 0.09" diameter center hole. I believe they will contain either 9 or 10 teeth. they fit on the pins I have marked (1) and (2) above. if I could give rep ponts, you'd get them!! thanks again for looking!
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson Last edited by tcb-1; 09-21-2009 at 10:06 PM. |
![]() |
![]() |
![]() |
#10 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Another (Sorry) Speed Warning Question
I'll look when I get up tomorrow. It will be after lunch time. I'm up most days around 1:00. I have more parts also just not got pictures. I'm pretty sure I have them because I have a old face with two gears on the back side of it. I'll post pictures also.
![]() ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#11 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Another (Sorry) Speed Warning Question
thanks again, Andy. you da man!!
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#12 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Another (Sorry) Speed Warning Question
Here is mine in the 71. It works but I keep it up at 100 MPH all the time so I don't hear the buzzer all day long. I used a seat buzzer for it.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#13 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Another (Sorry) Speed Warning Question
Well I looked @ my stash. I think these are the gear clogs you want. I know they came out of this speedo so they should be right.
Here is some more.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#14 |
SWB 4x4 Collector
![]() Join Date: Jun 2001
Location: Osage City, KS
Posts: 5,152
|
Re: Another (Sorry) Speed Warning Question
Andy, I don't believe those are the ones he needs. I have a speedometer from a speedwarning/speed minder/speed alert (whatever you want to call it) sitting right by my cpu. The cogs look different. I hate to crack mine open though cause I have never had very good luck removing needles on gauges. I will take the best pics I can and try to count the teeth for you. This is all I found in a junkyard for the speedwarning. It appears someone removed this dash long before so the reset knob and buzzer and wiring were gone, but the speedometer was still in tact with the pigtail coming from behind it. I am missing everything else, and have been looking for the parts to piece mine together one day. I am currently sanding on a truck outside, but I will try and get those pics for you Doug by tonight. Trevor
__________________
TREVOR ![]() ![]() ![]() ![]() ![]() http://67-72chevytrucks.com/vboard/s...d.php?t=624819 ![]() ![]() :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever |
![]() |
![]() |
![]() |
#15 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Another (Sorry) Speed Warning Question
Andy,
Trevor is right, the gears you have pics of are the gears I have now. the two I'm in search of are smaller than those two gears in the pic with maybe 9 or 10 teeth. happpen to see anything smaller in your stash?
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#16 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Another (Sorry) Speed Warning Question
I didn't see anything else. I'll look again tomorrow but I think that's all I have. It's been so long ago that I put these together I may have used them in mine I honestley don't remember.
![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#17 |
Senior Member
Join Date: Jan 2005
Location: Loveland Co.
Posts: 3,098
|
Re: Another (Sorry) Speed Warning Question
Doug, how'd it go with the customer service rep today?
__________________
Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html |
![]() |
![]() |
![]() |
#18 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Another (Sorry) Speed Warning Question
well Chris, I guess it could have went worse. the guy was a GM fanatic, builds some high dollar pro touring cars, owns a '72 Super swb, black on black and he has a '71 swb frame for sale with an air bag setup on it already. I guess he was reading my mind! so we got along right off the bat. nice.
I was up front and told the guy I wasn't out to screw anyone and if someone would have just confessed, I would have probably not taken it any further. I guess I watch too much CSI because I had pictures of the damage as found and a Paypal receipt when I originally bought the gauges. my ducks were in a row...... I asked for $250 for the damage. I have already spent $60, so I think I'm within the repair costs. Andy, thank you so much for trying to help. your a great forum mate!! Trevor, can you post a pic of your speedometer? I'd like to see what I'm missing.
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson Last edited by tcb-1; 09-22-2009 at 08:46 PM. |
![]() |
![]() |
![]() |
#19 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Another (Sorry) Speed Warning Question
If you don't have any luck contact PT'S 70 CST
He redoes these on here. He may help you out. ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Aug 2009
Location: Ft Stockton Texas
Posts: 90
|
Re: Another (Sorry) Speed Warning Question
I never bothered fixing my old speedo, i just bought a garmin, i use it in all my vehicles, hardly ever look at gauges anymore.
|
![]() |
![]() |
![]() |
#21 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: Another (Sorry) Speed Warning Question
I have a Garmin also and have thought about mounting it on my golf cart. It gives speed and tells you where you should be.
![]() ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#22 |
SWB 4x4 Collector
![]() Join Date: Jun 2001
Location: Osage City, KS
Posts: 5,152
|
Re: Another (Sorry) Speed Warning Question
Doug, sorry it took so long tonight. Here are some pics to help you out. I can't really count how many teeth are on them as it hits the stop before I can count all the way around. Trevor
![]() ![]() ![]()
__________________
TREVOR ![]() ![]() ![]() ![]() ![]() http://67-72chevytrucks.com/vboard/s...d.php?t=624819 ![]() ![]() :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever |
![]() |
![]() |
![]() |
#23 |
SWB 4x4 Collector
![]() Join Date: Jun 2001
Location: Osage City, KS
Posts: 5,152
|
Re: Another (Sorry) Speed Warning Question
__________________
TREVOR ![]() ![]() ![]() ![]() ![]() http://67-72chevytrucks.com/vboard/s...d.php?t=624819 ![]() ![]() :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever |
![]() |
![]() |
![]() |
#24 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Another (Sorry) Speed Warning Question
nice Trevor! don't suppose you'd want to sell that speedo, hummmmm???? **clearing throat**
thanks for the pics. that helps!
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#25 |
SWB 4x4 Collector
![]() Join Date: Jun 2001
Location: Osage City, KS
Posts: 5,152
|
Re: Another (Sorry) Speed Warning Question
I would if I ever ran across a full speedwarning dash one of these days. For now, I think I will hang onto it. No problem on the help though, Trevor
__________________
TREVOR ![]() ![]() ![]() ![]() ![]() http://67-72chevytrucks.com/vboard/s...d.php?t=624819 ![]() ![]() :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|