Lug nut, and wheels stud question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DragRag · 09-26-2009, 05:44 AM

I picked up a set of 04' alloy wheels for my 88 k30 Single rear truck. They bolted up just fine using my stock lug nuts. Of course the center caps need the 04' lug nuts to work, well I didn't get those. My questions is, are the threads on my 88', and the threads on the studs on the 04' the same thread? If so I would like to find late model lug nuts so I can put the center caps on. Let me know if the newer lugs will work on my 88', thanks.

James McClure · 09-26-2009, 08:42 AM

Drag. I did mine just like you are. Mine is an 84 though and I had to get special nuts for it. I don't remember if 88 is metric or not. I would call Chevy and see if 88 & 04 threads are the same or just pick an 04 nut up and try it. I don't remember who I got the nuts from. If your 4WD, take a 3.5 " hole saw and cut out the center of 2 caps, fits like a glove. jim

**N2TRUX** · 09-26-2009, 10:55 AM

Check eBay for "conversion lugnuts".

bigblock73 · 09-26-2009, 11:14 AM

Quote:

Originally Posted by N2TRUX

Check eBay for "conversion lugnuts".

Yup, good tip. I got mine from the 'bay...running 88+ wheels and centers on my '77.

09-26-2009, 05:44 AM	#1
DragRag Registered User Join Date: Aug 2009 Location: Good old US of A! Posts: 26	Lug nut, and wheels stud question. I picked up a set of 04' alloy wheels for my 88 k30 Single rear truck. They bolted up just fine using my stock lug nuts. Of course the center caps need the 04' lug nuts to work, well I didn't get those. My questions is, are the threads on my 88', and the threads on the studs on the 04' the same thread? If so I would like to find late model lug nuts so I can put the center caps on. Let me know if the newer lugs will work on my 88', thanks.

09-26-2009, 08:42 AM	#2
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: Lug nut, and wheels stud question. Drag. I did mine just like you are. Mine is an 84 though and I had to get special nuts for it. I don't remember if 88 is metric or not. I would call Chevy and see if 88 & 04 threads are the same or just pick an 04 nut up and try it. I don't remember who I got the nuts from. If your 4WD, take a 3.5 " hole saw and cut out the center of 2 caps, fits like a glove. jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.

09-26-2009, 10:55 AM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Lug nut, and wheels stud question. Check eBay for "conversion lugnuts". __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.