core support question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kacz81 · 10-14-2009, 08:22 PM

Hey guys bought a 72 c10 last year that was in pieces i'm currently dropping my motor back in it and not sure which way the core support mount bushings go bought a new set from brothers came with 2 cone shape 2 dounghnut shape i don't know which is top/bottom up/down any help/pics would be greatly appreciated thanks kacz81

Tx Firefighter · 10-14-2009, 08:48 PM

The flat hockey puck ones go on top of the frame mount. There is a shoulder on one side of them that fits down into the hole on the frame. The cone shaped ones go under the mount bracket. There should be a metal bushing/ spacer that goes through the middle of it all. Drop the bolt in from the top. Nut on bottom.

10-14-2009, 08:22 PM	#1
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	core support question Hey guys bought a 72 c10 last year that was in pieces i'm currently dropping my motor back in it and not sure which way the core support mount bushings go bought a new set from brothers came with 2 cone shape 2 dounghnut shape i don't know which is top/bottom up/down any help/pics would be greatly appreciated thanks kacz81

10-14-2009, 08:48 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: core support question The flat hockey puck ones go on top of the frame mount. There is a shoulder on one side of them that fits down into the hole on the frame. The cone shaped ones go under the mount bracket. There should be a metal bushing/ spacer that goes through the middle of it all. Drop the bolt in from the top. Nut on bottom. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.