Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-20-2009, 05:45 PM | #1 |
Registered User
Join Date: Sep 2009
Location: Chico California
Posts: 16
|
Super Low Pro Street Project
Hey people, I was just hoping some of you guys could tell me how you get your pickups to sit so low, I am starting a pro street project, and I want it to sit really low, like close to frame on ground, I will be backhalving the truck first, and then moving up front to tackle whatever needs to be done there...I'm just wondering what it takes in the front/and or rear to lowever everything properly and not be dragging any components on the ground or scraping anything that shouldn't...thank you...also, any pictures of what you guys are talking about would be helpful..!!!Thanks again
|
10-20-2009, 05:53 PM | #2 |
Registered User
Join Date: Aug 2008
Location: Sunny Arizona
Posts: 525
|
Re: Super Low Pro Street Project
If I were you I would do a search on the subject of lowering or bagging our trucks and also you could visit the suspension section of the forum. Lots of good info there.
__________________
Nick "Everyone has a plan, 'till they get punched in the mouth".........Mike Tyson 1968, GMC, SWB, Project 1972, GMC, LWB, Daily Driver, 383, headers, 2.5"/3" exhaust, 200r4, 3.5/5 ECE components. 1972, C/10, LWB, 350 vortec, th350 |
10-20-2009, 06:49 PM | #3 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: Super Low Pro Street Project
The front is easy, bags and dropped spindles. The rear will require a large c-notch that will go up into the bed. All is doable, depending on time, money and skill....... Can't wait to see your pictures. I've got a 68 that is tubbed and lowered, but not slammed on the ground. I like to use my bed, . Someday I'll make it look like this last photo, .
R/
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
10-20-2009, 07:12 PM | #4 |
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Super Low Pro Street Project
hopefully I will also have mine lowered like rob's....
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
10-20-2009, 07:42 PM | #5 |
Registered User
Join Date: Aug 2009
Location: Austin, Tx
Posts: 516
|
Re: Super Low Pro Street Project
To get mine slammed, I went with a porterbuilt dropmember to replace my factory crossmember, drop spindles and bags. I raised the exhaust system up in the framerails and used a tubular tranny crossmember so nothing hangs below the frame.
|
10-20-2009, 11:49 PM | #6 |
Registered User
Join Date: Sep 2009
Location: Chico California
Posts: 16
|
Re: Super Low Pro Street Project
All great input, and great pictures, thank you guys. keep it coming!!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|