AL Selling the drop member project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sgrier · 11-06-2009, 12:29 PM

I hate to have to do this but I am going to have the sell the project. I have for sell the following parts.

Front and rear drop members installed on SWB frame. Frame was blasted and painted. Front is completely done rack and all steering installed. Rear is partially done. Notch installed, part of 4 link in rear end housing not finished. This has the complete drop member setup with all of the cross members and accessories. The rack is for power steering and I have the lines to hook to the factory pump. Motor mounts are for a SBC.

I have a set of Coys 20/22 C-5 polished new still in the box.

I also have the body parts to put the truck together. Factory 72 A/C cab, @ SWB fleet beds one painted two tone black and blue. Factory fenders and hood with some body work done. Lots of other misc. parts. I have a running factory 350 from the 72 truck motor has 75000 original miles have 2 turbo 350 trans also.

Would like to keep this as a package, but would part out if I had enough interest in the parts.

I have close to 10,000.00 in all the parts and truck. Would like to get 8500 for package. I can discuss prices for any combination of the parts. I will email pics for anybody interested.

Thanks for looking.

STOCKISH · 11-06-2009, 03:19 PM

Sounds like a killer project. Hate you have to sell it. Good luck.

sonseeker · 11-06-2009, 04:09 PM

Interested in your swb fleetside bed. Pics to sonseeker1953@yahoo.com

*Shane* · 11-06-2009, 04:15 PM

Interested in talking to you should you decide to part it out.

sgrier · 11-06-2009, 04:20 PM

Guys thanks for the interest. I will get in touch with u if I decide to start parting out. Hate to sell parts and then have to keep the rest and not be able to finish or sell. Thanks again.

soala70 · 11-06-2009, 06:06 PM

I would be interested in coys if you part sent you my cell in a pm

71 burb · 11-06-2009, 06:14 PM

i'd be interested in frame if part out thanks jason just pm me

sgrier · 11-06-2009, 06:17 PM

PM's sent. Thanks.

**Hart_Rod** · 11-06-2009, 10:18 PM

Aren't you just north of Montgomery? If so, let me know and PM me your phone number, I'll be up there tomorrow.

R/

sgrier · 11-09-2009, 10:57 PM

Hey guys thanks for all of the interest in my parts. Things are looking up a little and I am going to keep the parts and continue to slowly but surely work on the project. Thanks

**Hart_Rod** · 11-09-2009, 11:35 PM

Quote:

Originally Posted by sgrier

Hey guys thanks for all of the interest in my parts. Things are looking up a little and I am going to keep the parts and continue to slowly but surely work on the project. Thanks

Glad to hear that. I hate seeing guys parting their projects that they've put so much time. Take care and the best to you.

my67chevytruck · 11-09-2009, 11:47 PM

^ x2!

sgrier · 11-10-2009, 09:48 AM

Thanks for the support guys. I am going to just keeping plugging away at it. Hope to have it ready to drive sometime this spring.

11-06-2009, 12:29 PM	#1
sgrier Registered User Join Date: Dec 2007 Location: wetumpka, alabama Posts: 141	Selling the drop member project I hate to have to do this but I am going to have the sell the project. I have for sell the following parts. Front and rear drop members installed on SWB frame. Frame was blasted and painted. Front is completely done rack and all steering installed. Rear is partially done. Notch installed, part of 4 link in rear end housing not finished. This has the complete drop member setup with all of the cross members and accessories. The rack is for power steering and I have the lines to hook to the factory pump. Motor mounts are for a SBC. I have a set of Coys 20/22 C-5 polished new still in the box. I also have the body parts to put the truck together. Factory 72 A/C cab, @ SWB fleet beds one painted two tone black and blue. Factory fenders and hood with some body work done. Lots of other misc. parts. I have a running factory 350 from the 72 truck motor has 75000 original miles have 2 turbo 350 trans also. Would like to keep this as a package, but would part out if I had enough interest in the parts. I have close to 10,000.00 in all the parts and truck. Would like to get 8500 for package. I can discuss prices for any combination of the parts. I will email pics for anybody interested. Thanks for looking.

11-06-2009, 03:19 PM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Selling the drop member project Sounds like a killer project. Hate you have to sell it. Good luck. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

11-06-2009, 04:09 PM	#3
sonseeker Registered User Join Date: Sep 2009 Location: Davison,Mi 48423 Posts: 110	Re: Selling the drop member project Interested in your swb fleetside bed. Pics to sonseeker1953@yahoo.com

11-06-2009, 04:15 PM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Selling the drop member project Interested in talking to you should you decide to part it out.

11-06-2009, 04:20 PM	#5
sgrier Registered User Join Date: Dec 2007 Location: wetumpka, alabama Posts: 141	Re: Selling the drop member project Guys thanks for the interest. I will get in touch with u if I decide to start parting out. Hate to sell parts and then have to keep the rest and not be able to finish or sell. Thanks again.

11-06-2009, 06:06 PM	#6
soala70 Registered User Join Date: Mar 2002 Location: geneva al usa Posts: 343	Re: Selling the drop member project I would be interested in coys if you part sent you my cell in a pm __________________ bogey5

11-06-2009, 06:14 PM	#7
71 burb Registered User Join Date: Mar 2008 Location: mount olive al Posts: 176	Re: Selling the drop member project i'd be interested in frame if part out thanks jason just pm me

11-06-2009, 06:17 PM	#8
sgrier Registered User Join Date: Dec 2007 Location: wetumpka, alabama Posts: 141	Re: Selling the drop member project PM's sent. Thanks.

11-06-2009, 10:18 PM	#9
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Selling the drop member project Aren't you just north of Montgomery? If so, let me know and PM me your phone number, I'll be up there tomorrow. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-09-2009, 10:57 PM	#10
sgrier Registered User Join Date: Dec 2007 Location: wetumpka, alabama Posts: 141	Re: Selling the drop member project Hey guys thanks for all of the interest in my parts. Things are looking up a little and I am going to keep the parts and continue to slowly but surely work on the project. Thanks

11-09-2009, 11:47 PM	#12
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Selling the drop member project ^ x2! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

11-10-2009, 09:48 AM	#13
sgrier Registered User Join Date: Dec 2007 Location: wetumpka, alabama Posts: 141	Re: Selling the drop member project Thanks for the support guys. I am going to just keeping plugging away at it. Hope to have it ready to drive sometime this spring.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.